Commit 5ddc7bd4 authored by Romain Izard's avatar Romain Izard Committed by Brian Norris

mtd: atmel_nand: Support variable RB_EDGE interrupts

The NFC controller used to accelerate the NAND transfers on SAMA5 chips
can use either RB_EDGE0 or RB_EDGE3 as its ready/busy interrupt bit.

Use the controller's compatible string to select the correct bit.

For the binding:
Acked-by: default avatarRob Herring <robh@kernel.org>
Reviewed-by: default avatarWenyou Yang <Wenyou.yang@atmel.com>
Tested-by: default avatarWenyou Yang <wenyou.yang@atmel.com>
Reviewed-by: default avatarBoris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: default avatarRomain Izard <romain.izard.pro@gmail.com>
Signed-off-by: default avatarBrian Norris <computersforpeace@gmail.com>
parent ed4eeba7
......@@ -34,7 +34,7 @@ Optional properties:
- nand-on-flash-bbt: boolean to enable on flash bbt option if not present false
- Nand Flash Controller(NFC) is a slave driver under Atmel nand flash
- Required properties:
- compatible : "atmel,sama5d3-nfc".
- compatible : "atmel,sama5d3-nfc" or "atmel,sama5d4-nfc".
- reg : should specify the address and size used for NFC command registers,
NFC registers and NFC Sram. NFC Sram address and size can be absent
if don't want to use it.
......
......@@ -67,6 +67,10 @@ struct atmel_nand_caps {
bool pmecc_correct_erase_page;
};
struct atmel_nand_nfc_caps {
uint32_t rb_mask;
};
/* oob layout for large page size
* bad block info is on bytes 0 and 1
* the bytes have to be consecutives to avoid
......@@ -111,6 +115,7 @@ struct atmel_nfc {
/* Point to the sram bank which include readed data via NFC */
void *data_in_sram;
bool will_write_sram;
const struct atmel_nand_nfc_caps *caps;
};
static struct atmel_nfc nand_nfc;
......@@ -1675,9 +1680,9 @@ static irqreturn_t hsmc_interrupt(int irq, void *dev_id)
nfc_writel(host->nfc->hsmc_regs, IDR, NFC_SR_XFR_DONE);
ret = IRQ_HANDLED;
}
if (pending & NFC_SR_RB_EDGE) {
if (pending & host->nfc->caps->rb_mask) {
complete(&host->nfc->comp_ready);
nfc_writel(host->nfc->hsmc_regs, IDR, NFC_SR_RB_EDGE);
nfc_writel(host->nfc->hsmc_regs, IDR, host->nfc->caps->rb_mask);
ret = IRQ_HANDLED;
}
if (pending & NFC_SR_CMD_DONE) {
......@@ -1695,7 +1700,7 @@ static void nfc_prepare_interrupt(struct atmel_nand_host *host, u32 flag)
if (flag & NFC_SR_XFR_DONE)
init_completion(&host->nfc->comp_xfer_done);
if (flag & NFC_SR_RB_EDGE)
if (flag & host->nfc->caps->rb_mask)
init_completion(&host->nfc->comp_ready);
if (flag & NFC_SR_CMD_DONE)
......@@ -1713,7 +1718,7 @@ static int nfc_wait_interrupt(struct atmel_nand_host *host, u32 flag)
if (flag & NFC_SR_XFR_DONE)
comp[index++] = &host->nfc->comp_xfer_done;
if (flag & NFC_SR_RB_EDGE)
if (flag & host->nfc->caps->rb_mask)
comp[index++] = &host->nfc->comp_ready;
if (flag & NFC_SR_CMD_DONE)
......@@ -1781,7 +1786,7 @@ static int nfc_device_ready(struct mtd_info *mtd)
dev_err(host->dev, "Lost the interrupt flags: 0x%08x\n",
mask & status);
return status & NFC_SR_RB_EDGE;
return status & host->nfc->caps->rb_mask;
}
static void nfc_select_chip(struct mtd_info *mtd, int chip)
......@@ -1954,8 +1959,8 @@ static void nfc_nand_command(struct mtd_info *mtd, unsigned int command,
}
/* fall through */
default:
nfc_prepare_interrupt(host, NFC_SR_RB_EDGE);
nfc_wait_interrupt(host, NFC_SR_RB_EDGE);
nfc_prepare_interrupt(host, host->nfc->caps->rb_mask);
nfc_wait_interrupt(host, host->nfc->caps->rb_mask);
}
}
......@@ -2352,6 +2357,11 @@ static int atmel_nand_nfc_probe(struct platform_device *pdev)
}
}
nfc->caps = (const struct atmel_nand_nfc_caps *)
of_device_get_match_data(&pdev->dev);
if (!nfc->caps)
return -ENODEV;
nfc_writel(nfc->hsmc_regs, IDR, 0xffffffff);
nfc_readl(nfc->hsmc_regs, SR); /* clear the NFC_SR */
......@@ -2380,8 +2390,17 @@ static int atmel_nand_nfc_remove(struct platform_device *pdev)
return 0;
}
static const struct atmel_nand_nfc_caps sama5d3_nfc_caps = {
.rb_mask = NFC_SR_RB_EDGE0,
};
static const struct atmel_nand_nfc_caps sama5d4_nfc_caps = {
.rb_mask = NFC_SR_RB_EDGE3,
};
static const struct of_device_id atmel_nand_nfc_match[] = {
{ .compatible = "atmel,sama5d3-nfc" },
{ .compatible = "atmel,sama5d3-nfc", .data = &sama5d3_nfc_caps },
{ .compatible = "atmel,sama5d4-nfc", .data = &sama5d4_nfc_caps },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, atmel_nand_nfc_match);
......
......@@ -42,7 +42,8 @@
#define NFC_SR_UNDEF (1 << 21)
#define NFC_SR_AWB (1 << 22)
#define NFC_SR_ASE (1 << 23)
#define NFC_SR_RB_EDGE (1 << 24)
#define NFC_SR_RB_EDGE0 (1 << 24)
#define NFC_SR_RB_EDGE3 (1 << 27)
#define ATMEL_HSMC_NFC_IER 0x0c
#define ATMEL_HSMC_NFC_IDR 0x10
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment