Commit 5e6d2665 authored by Kevin Wang's avatar Kevin Wang Committed by Alex Deucher

drm/amd/powerplay: add thermal ctf support for navi10

add sw-CTF support for navi10
Signed-off-by: default avatarKevin Wang <kevin1.wang@amd.com>
Reviewed-by: default avatarHuang Rui <ray.huang@amd.com>
Reviewed-by: default avatarAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: default avatarAlex Deucher <alexander.deucher@amd.com>
parent 9634de27
......@@ -1007,6 +1007,10 @@ static int smu_hw_init(void *handle)
if (ret)
goto failed;
ret = smu_register_irq_handler(smu);
if (ret)
goto failed;
mutex_unlock(&smu->mutex);
if (!smu->pm_enabled)
......@@ -1051,6 +1055,9 @@ static int smu_hw_fini(void *handle)
kfree(table_context->od8_settings);
table_context->od8_settings = NULL;
kfree(smu->irq_source);
smu->irq_source = NULL;
ret = smu_fini_fb_allocations(smu);
if (ret)
return ret;
......
......@@ -497,6 +497,7 @@ struct mclock_latency_table {
struct smu_context
{
struct amdgpu_device *adev;
struct amdgpu_irq_src *irq_source;
const struct smu_funcs *funcs;
const struct pptable_funcs *ppt_funcs;
......@@ -687,6 +688,7 @@ struct smu_funcs
int (*set_fan_speed_rpm)(struct smu_context *smu, uint32_t speed);
int (*set_xgmi_pstate)(struct smu_context *smu, uint32_t pstate);
int (*gfx_off_control)(struct smu_context *smu, bool enable);
int (*register_irq_handler)(struct smu_context *smu);
};
#define smu_init_microcode(smu) \
......@@ -895,6 +897,8 @@ struct smu_funcs
((smu)->ppt_funcs->get_current_clk_freq_by_table ? (smu)->ppt_funcs->get_current_clk_freq_by_table((smu), (clk_type), (value)) : 0)
#define smu_get_thermal_temperature_range(smu, range) \
((smu)->ppt_funcs->get_thermal_temperature_range? (smu)->ppt_funcs->get_thermal_temperature_range((smu), (range)) : 0)
#define smu_register_irq_handler(smu) \
((smu)->funcs->register_irq_handler ? (smu)->funcs->register_irq_handler(smu) : 0)
extern int smu_get_atom_data_table(struct smu_context *smu, uint32_t table,
uint16_t *size, uint8_t *frev, uint8_t *crev,
......
......@@ -476,6 +476,8 @@ static int navi10_store_powerplay_table(struct smu_context *smu)
memcpy(table_context->driver_pptable, &powerplay_table->smc_pptable,
sizeof(PPTable_t));
table_context->thermal_controller_type = powerplay_table->thermal_controller_type;
return 0;
}
......
......@@ -1131,6 +1131,8 @@ static int smu_v11_0_set_thermal_range(struct smu_context *smu,
val = RREG32_SOC15(THM, 0, mmTHM_THERMAL_INT_CTRL);
val = REG_SET_FIELD(val, THM_THERMAL_INT_CTRL, MAX_IH_CREDIT, 5);
val = REG_SET_FIELD(val, THM_THERMAL_INT_CTRL, THERM_IH_HW_ENA, 1);
val = REG_SET_FIELD(val, THM_THERMAL_INT_CTRL, THERM_INTH_MASK, 0);
val = REG_SET_FIELD(val, THM_THERMAL_INT_CTRL, THERM_INTL_MASK, 0);
val = REG_SET_FIELD(val, THM_THERMAL_INT_CTRL, DIG_THERM_INTH, (high / SMU_TEMPERATURE_UNITS_PER_CENTIGRADES));
val = REG_SET_FIELD(val, THM_THERMAL_INT_CTRL, DIG_THERM_INTL, (low / SMU_TEMPERATURE_UNITS_PER_CENTIGRADES));
val = val & (~THM_THERMAL_INT_CTRL__THERM_TRIGGER_MASK_MASK);
......@@ -1181,6 +1183,7 @@ static int smu_v11_0_start_thermal_control(struct smu_context *smu)
ret = smu_v11_0_enable_thermal_alert(smu);
if (ret)
return ret;
ret = smu_set_thermal_fan_table(smu);
if (ret)
return ret;
......@@ -1662,6 +1665,81 @@ static int smu_v11_0_set_xgmi_pstate(struct smu_context *smu,
return ret;
}
#define THM_11_0__SRCID__THM_DIG_THERM_L2H 0 /* ASIC_TEMP > CG_THERMAL_INT.DIG_THERM_INTH */
#define THM_11_0__SRCID__THM_DIG_THERM_H2L 1 /* ASIC_TEMP < CG_THERMAL_INT.DIG_THERM_INTL */
static int smu_v11_0_irq_process(struct amdgpu_device *adev,
struct amdgpu_irq_src *source,
struct amdgpu_iv_entry *entry)
{
uint32_t client_id = entry->client_id;
uint32_t src_id = entry->src_id;
if (client_id == SOC15_IH_CLIENTID_THM) {
switch (src_id) {
case THM_11_0__SRCID__THM_DIG_THERM_L2H:
pr_warn("GPU over temperature range detected on PCIe %d:%d.%d!\n",
PCI_BUS_NUM(adev->pdev->devfn),
PCI_SLOT(adev->pdev->devfn),
PCI_FUNC(adev->pdev->devfn));
break;
case THM_11_0__SRCID__THM_DIG_THERM_H2L:
pr_warn("GPU under temperature range detected on PCIe %d:%d.%d!\n",
PCI_BUS_NUM(adev->pdev->devfn),
PCI_SLOT(adev->pdev->devfn),
PCI_FUNC(adev->pdev->devfn));
break;
default:
pr_warn("GPU under temperature range unknown src id (%d), detected on PCIe %d:%d.%d!\n",
src_id,
PCI_BUS_NUM(adev->pdev->devfn),
PCI_SLOT(adev->pdev->devfn),
PCI_FUNC(adev->pdev->devfn));
break;
}
}
return 0;
}
static const struct amdgpu_irq_src_funcs smu_v11_0_irq_funcs =
{
.process = smu_v11_0_irq_process,
};
static int smu_v11_0_register_irq_handler(struct smu_context *smu)
{
struct amdgpu_device *adev = smu->adev;
struct amdgpu_irq_src *irq_src = smu->irq_source;
int ret = 0;
/* already register */
if (irq_src)
return 0;
irq_src = kzalloc(sizeof(struct amdgpu_irq_src), GFP_KERNEL);
if (!irq_src)
return -ENOMEM;
smu->irq_source = irq_src;
irq_src->funcs = &smu_v11_0_irq_funcs;
ret = amdgpu_irq_add_id(adev, SOC15_IH_CLIENTID_THM,
THM_11_0__SRCID__THM_DIG_THERM_L2H,
irq_src);
if (ret)
return ret;
ret = amdgpu_irq_add_id(adev, SOC15_IH_CLIENTID_THM,
THM_11_0__SRCID__THM_DIG_THERM_H2L,
irq_src);
if (ret)
return ret;
return ret;
}
static const struct smu_funcs smu_v11_0_funcs = {
.init_microcode = smu_v11_0_init_microcode,
.load_microcode = smu_v11_0_load_microcode,
......@@ -1711,6 +1789,7 @@ static const struct smu_funcs smu_v11_0_funcs = {
.set_fan_speed_rpm = smu_v11_0_set_fan_speed_rpm,
.set_xgmi_pstate = smu_v11_0_set_xgmi_pstate,
.gfx_off_control = smu_v11_0_gfx_off_control,
.register_irq_handler = smu_v11_0_register_irq_handler,
};
void smu_v11_0_set_smu_funcs(struct smu_context *smu)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment