ARM: nomadik: delete IRQ header

This header is not used any more after the platform was switched
to obtain resources from the device tree.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

arch/arm/mach-nomadik/cpu-8815.c

@@ -38,7 +38,6 @@
 #include <linux/gpio.h>
 #include <linux/amba/mmci.h>
 
-#include <mach/irqs.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>

arch/arm/mach-nomadik/include/mach/irqs.h

-/*
- *  mach-nomadik/include/mach/irqs.h
- *
- *  Copyright (C) ST Microelectronics
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H
-
-#define IRQ_VIC_START		32	/* first VIC interrupt is 1 */
-
-/*
- * Interrupt numbers generic for all Nomadik Chip cuts
- */
-#define IRQ_WATCHDOG			(IRQ_VIC_START+0)
-#define IRQ_SOFTINT			(IRQ_VIC_START+1)
-#define IRQ_CRYPTO			(IRQ_VIC_START+2)
-#define IRQ_OWM				(IRQ_VIC_START+3)
-#define IRQ_MTU0			(IRQ_VIC_START+4)
-#define IRQ_MTU1			(IRQ_VIC_START+5)
-#define IRQ_GPIO0			(IRQ_VIC_START+6)
-#define IRQ_GPIO1			(IRQ_VIC_START+7)
-#define IRQ_GPIO2			(IRQ_VIC_START+8)
-#define IRQ_GPIO3			(IRQ_VIC_START+9)
-#define IRQ_RTC_RTT			(IRQ_VIC_START+10)
-#define IRQ_SSP				(IRQ_VIC_START+11)
-#define IRQ_UART0			(IRQ_VIC_START+12)
-#define IRQ_DMA1			(IRQ_VIC_START+13)
-#define IRQ_CLCD_MDIF			(IRQ_VIC_START+14)
-#define IRQ_DMA0			(IRQ_VIC_START+15)
-#define IRQ_PWRFAIL			(IRQ_VIC_START+16)
-#define IRQ_UART1			(IRQ_VIC_START+17)
-#define IRQ_FIRDA			(IRQ_VIC_START+18)
-#define IRQ_MSP0			(IRQ_VIC_START+19)
-#define IRQ_I2C0			(IRQ_VIC_START+20)
-#define IRQ_I2C1			(IRQ_VIC_START+21)
-#define IRQ_SDMMC			(IRQ_VIC_START+22)
-#define IRQ_USBOTG			(IRQ_VIC_START+23)
-#define IRQ_SVA_IT0			(IRQ_VIC_START+24)
-#define IRQ_SVA_IT1			(IRQ_VIC_START+25)
-#define IRQ_SAA_IT0			(IRQ_VIC_START+26)
-#define IRQ_SAA_IT1			(IRQ_VIC_START+27)
-#define IRQ_UART2			(IRQ_VIC_START+28)
-#define IRQ_MSP2			(IRQ_VIC_START+29)
-#define IRQ_L2CC			(IRQ_VIC_START+30)
-#define IRQ_HPI				(IRQ_VIC_START+31)
-#define IRQ_SKE				(IRQ_VIC_START+32)
-#define IRQ_KP				(IRQ_VIC_START+33)
-#define IRQ_MEMST			(IRQ_VIC_START+34)
-#define IRQ_SGA_IT			(IRQ_VIC_START+35)
-#define IRQ_USBM			(IRQ_VIC_START+36)
-#define IRQ_MSP1			(IRQ_VIC_START+37)
-
-#define NOMADIK_GPIO_OFFSET		(IRQ_VIC_START+64)
-
-/* After chip-specific IRQ numbers we have the GPIO ones */
-#define NOMADIK_NR_GPIO			128 /* last 4 not wired to pins */
-#define NOMADIK_GPIO_TO_IRQ(gpio)	((gpio) + NOMADIK_GPIO_OFFSET)
-#define NOMADIK_IRQ_TO_GPIO(irq)	((irq) - NOMADIK_GPIO_OFFSET)
-#define NOMADIK_NR_IRQS			NOMADIK_GPIO_TO_IRQ(NOMADIK_NR_GPIO)
-
-/* Following two are used by entry_macro.S, to access our dual-vic */
-#define VIC_REG_IRQSR0		0
-#define VIC_REG_IRQSR1		0x20
-
-#endif /* __ASM_ARCH_IRQS_H */