[ARM] Remove broken SA1100 machine support.

This removes a bunch of SA1100 machine support files which have been
unable to be built for a while, due to missing out on updates.

Warning of removal had been posted to the ARM kernel mailing list,
and this cset represents those which did not attract any interest.

arch/arm/boot/compressed/Makefile

@@ -40,9 +40,6 @@ endif
 
 ifeq ($(CONFIG_ARCH_SA1100),y)
 OBJS		+= head-sa1100.o
-ifeq ($(CONFIG_SA1100_NANOENGINE),y)
-  OBJS += hw-bse.o
-endif
 endif
 
 ifeq ($(CONFIG_CPU_XSCALE),y)

arch/arm/boot/compressed/head-sa1100.S

@@ -16,47 +16,13 @@
 __SA1100_start:
 
 		@ Preserve r8/r7 i.e. kernel entry values
-
-#if defined(CONFIG_SA1100_GRAPHICSCLIENT) && !defined(CONFIG_ANGELBOOT)
-		mov	r7, #MACH_TYPE_GRAPHICSCLIENT
-		mov	r8, #0
-#endif
-#if defined(CONFIG_SA1100_GRAPHICSMASTER) && !defined(CONFIG_ANGELBOOT)
-		mov	r7, #MACH_TYPE_GRAPHICSMASTER
-		mov	r8, #0
-#endif
-#if defined(CONFIG_SA1100_ADSBITSY) && !defined(CONFIG_ANGELBOOT)
-		mov	r7, #MACH_TYPE_ADSBITSY
-		mov	r8, #0
-#endif
-
 #ifdef CONFIG_SA1100_COLLIE
 		mov	r7, #MACH_TYPE_COLLIE
 #endif
-#ifdef CONFIG_SA1100_PFS168
-		@ REVISIT_PFS168: Temporary until firmware updated to use assigned machine number
-		mov	r7, #MACH_TYPE_PFS168
-#endif
 #ifdef CONFIG_SA1100_SIMPAD
 		@ UNTIL we've something like an open bootldr
-		mov	r7, #MACH_TYPE_SIMPAD @should be 87
+		mov	r7, #MACH_TYPE_SIMPAD	@should be 87
 #endif
-
-#ifdef CONFIG_SA1100_VICTOR
-		teq	r7, #MACH_TYPE_VICTOR
-		bne	10f
-
-		@ Copy cmdline to 0xc0000000
-		mov	r1, #0xc0000000
-		cmp	r0, #0
-		moveq	r2, #0
-1:		ldrneb	r2, [r0], #1
-		cmpne	r2, #0
-		strb	r2, [r1], #1
-		bne	1b
-10:
-#endif
-
 		mrc	p15, 0, r0, c1, c0, 0	@ read control reg
 		ands	r0, r0, #0x0d
 		beq	99f

arch/arm/boot/compressed/hw-bse.c

-/*
- * Bright Star Engineering Inc.
- *
- * code for readng parameters from the
- * parameter blocks of the boot block
- * flash memory
- *
- */
-
-static int strcmp(const char *s1, const char *s2)
-{
-  while (*s1 != '\0' && *s1 == *s2)
-    {
-      s1++;
-      s2++;
-    }
-
-  return (*(unsigned char *) s1) - (*(unsigned char *) s2);
-}
-
-struct pblk_t {
-  char type;
-  unsigned short size;
-};
-
-static char *bse_getflashparam(char *name) {
-  unsigned int esize;
-  char *q,*r;
-  unsigned char *p,*e;
-  struct pblk_t *thepb = (struct pblk_t *) 0x00004000;
-  struct pblk_t *altpb = (struct pblk_t *) 0x00006000;  
-  if (thepb->type&1) {
-    if (altpb->type&1) {
-      /* no valid param block */ 
-      return (char*)0;
-    } else {
-      /* altpb is valid */
-      struct pblk_t *tmp;
-      tmp = thepb;
-      thepb = altpb;
-      altpb = tmp;
-    }
-  }
-  p = (char*)thepb + sizeof(struct pblk_t);
-  e = p + thepb->size; 
-  while (p < e) {
-    q = p;
-    esize = *p;
-    if (esize == 0xFF) break;
-    if (esize == 0) break;
-    if (esize > 127) {
-      esize = (esize&0x7F)<<8 | p[1];
-      q++;
-    }
-    q++;
-    r=q;
-    if (*r && ((name == 0) || (!strcmp(name,r)))) {
-      while (*q++) ;
-      return q;
-    }
-    p+=esize;
-  }
-  return (char*)0;
-}
-
-void bse_setup(void) {
-  /* extract the linux cmdline from flash */
-  char *name=bse_getflashparam("linuxboot");
-  char *x = (char *)0xc0000100;
-  if (name) { 
-    while (*name) *x++=*name++;
-  }
-  *x=0;
-}

arch/arm/configs/brutus_defconfig

-#
-# Automatically generated make config: don't edit
-#
-CONFIG_ARM=y
-# CONFIG_SBUS is not set
-CONFIG_UID16=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-# CONFIG_OBSOLETE is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_KMOD is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_ARCA5K is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_RPC is not set
-CONFIG_ARCH_SA1100=y
-
-#
-# SA11x0 Implementations
-#
-# CONFIG_SA1100_ASSABET is not set
-CONFIG_SA1100_BRUTUS=y
-# CONFIG_SA1100_CERF is not set
-# CONFIG_SA1100_BITSY is not set
-# CONFIG_SA1100_LART is not set
-# CONFIG_SA1100_THINCLIENT is not set
-# CONFIG_SA1100_GRAPHICSCLIENT is not set
-# CONFIG_SA1100_NANOENGINE is not set
-# CONFIG_SA1100_VICTOR is not set
-# CONFIG_SA1100_XP860 is not set
-CONFIG_ANGELBOOT=y
-# CONFIG_SA1100_FREQUENCY_SCALE is not set
-# CONFIG_SA1100_VOLTAGE_SCALE is not set
-# CONFIG_ARCH_ACORN is not set
-# CONFIG_FOOTBRIDGE is not set
-# CONFIG_FOOTBRIDGE_HOST is not set
-# CONFIG_FOOTBRIDGE_ADDIN is not set
-CONFIG_CPU_32=y
-# CONFIG_CPU_26 is not set
-CONFIG_CPU_32v4=y
-CONFIG_CPU_SA1100=y
-CONFIG_DISCONTIGMEM=y
-# CONFIG_PCI is not set
-# CONFIG_ISA is not set
-# CONFIG_ISA_DMA is not set
-CONFIG_PC_KEYMAP=y
-
-#
-# General setup
-#
-# CONFIG_HOTPLUG is not set
-# CONFIG_PCMCIA is not set
-# CONFIG_NET is not set
-CONFIG_SYSVIPC=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-CONFIG_NWFPE=y
-CONFIG_KCORE_ELF=y
-# CONFIG_KCORE_AOUT is not set
-CONFIG_BINFMT_AOUT=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_PM is not set
-# CONFIG_ARTHUR is not set
-CONFIG_CMDLINE="mem=4M@0xc0000000 mem=4M@0xc8000000 mem=4M@0xd0000000 mem=4M@0xd8000000 keepinitrd root=/dev/ram ramdisk=8192 initrd=0xd8000000,3M"
-CONFIG_LEDS=y
-CONFIG_LEDS_TIMER=y
-CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Plug and Play configuration
-#
-# CONFIG_PNP is not set
-# CONFIG_ISAPNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_PARIDE is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_LVM is not set
-# CONFIG_BLK_DEV_MD is not set
-# CONFIG_MD_LINEAR is not set
-# CONFIG_MD_RAID0 is not set
-# CONFIG_MD_RAID1 is not set
-# CONFIG_MD_RAID5 is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_BLK_DEV_FLASH is not set
-
-#
-# ATA/IDE/MFM/RLL support
-#
-# CONFIG_IDE is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI support
-#
-# CONFIG_SCSI is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-# CONFIG_I2O_BLOCK is not set
-# CONFIG_I2O_SCSI is not set
-# CONFIG_I2O_PROC is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-# CONFIG_VT_CONSOLE is not set
-CONFIG_SERIAL_SA1100=y
-CONFIG_SERIAL_SA1100_CONSOLE=y
-# CONFIG_TOUCHSCREEN_UCB1200 is not set
-# CONFIG_TOUCHSCREEN_BITSY is not set
-# CONFIG_SERIAL is not set
-# CONFIG_SERIAL_EXTENDED is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_UNIX98_PTY_COUNT=32
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Mice
-#
-# CONFIG_BUSMOUSE is not set
-# CONFIG_MOUSE is not set
-
-#
-# Joysticks
-#
-# CONFIG_JOYSTICK is not set
-# CONFIG_QIC02_TAPE is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_INTEL_RNG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-
-#
-# Video For Linux
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-
-#
-# File systems
-#
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_ADFS_FS is not set
-# CONFIG_ADFS_FS_RW is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_FAT_FS is not set
-# CONFIG_MSDOS_FS is not set
-# CONFIG_UMSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_RAMFS is not set
-# CONFIG_ISO9660_FS is not set
-# CONFIG_JOLIET is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_NTFS_FS is not set
-# CONFIG_NTFS_DEBUG is not set
-# CONFIG_NTFS_RW is not set
-# CONFIG_HPFS_FS is not set
-CONFIG_PROC_FS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVFS_MOUNT is not set
-# CONFIG_DEVFS_DEBUG is not set
-CONFIG_DEVPTS_FS=y
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_QNX4FS_RW is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_EXT2_FS=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_SYSV_FS_WRITE is not set
-# CONFIG_UDF_FS is not set
-# CONFIG_UDF_RW is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_UFS_FS_WRITE is not set
-# CONFIG_NCPFS_NLS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-
-#
-# Console drivers
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FB=y
-
-#
-# Frame-buffer support
-#
-CONFIG_FB=y
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FB_CYBER2000 is not set
-CONFIG_FB_SA1100=y
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FBCON_ADVANCED is not set
-CONFIG_FBCON_CFB2=y
-CONFIG_FBCON_CFB4=y
-CONFIG_FBCON_CFB8=y
-CONFIG_FBCON_CFB16=y
-CONFIG_FBCON_FONTWIDTH8_ONLY=y
-CONFIG_FBCON_FONTS=y
-CONFIG_FONT_8x8=y
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB is not set
-
-#
-# Kernel hacking
-#
-CONFIG_FRAME_POINTER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_INFO=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_DEBUG_LL is not set

arch/arm/configs/empeg_defconfig

-#
-#
-# Example empeg-car kernel configuration file.
-#
-CONFIG_ARM=y
-
-#
-# System and processor type
-#
-# CONFIG_ARCH_ARC is not set
-# CONFIG_ARCH_A5K is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_FOOTBRIDGE is not set
-CONFIG_ARCH_SA1100=y
-CONFIG_CPU_SA1100=y
-# CONFIG_SA1100_BRUTUS is not set
-CONFIG_SA1100_EMPEG=y
-# CONFIG_SA1100_ITSY is not set
-# CONFIG_SA1100_PLEB is not set
-# CONFIG_SA1100_VICTOR is not set
-# CONFIG_EMPEG_HENRY is not set
-# CONFIG_ARCH_ACORN is not set
-# CONFIG_ISA_DMA is not set
-CONFIG_CPU_32=y
-# CONFIG_CPU_26 is not set
-# CONFIG_CPU_ARM2 is not set
-# CONFIG_CPU_ARM3 is not set
-# CONFIG_CPU_ARM6 is not set
-# CONFIG_CPU_ARM7 is not set
-CONFIG_CPU_SA110=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-# CONFIG_ALIGNMENT_TRAP is not set
-# CONFIG_TEXT_SECTIONS is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODVERSIONS=y
-# CONFIG_KMOD is not set
-
-#
-# General setup
-#
-CONFIG_NET=y
-# CONFIG_SYSVIPC is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_SYSCTL is not set
-CONFIG_NWFPE=y
-CONFIG_BINFMT_AOUT=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-# CONFIG_PARPORT is not set
-CONFIG_CMDLINE="mem=4M@0xc0000000 mem=4M@0xc8000000 root=/dev/hda1 initrd=0xd00b0000,320K"
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-CONFIG_BLK_DEV_IDE=y
-# CONFIG_BLK_DEV_HD_IDE is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_BLK_DEV_CMD640 is not set
-# CONFIG_IDE_CHIPSETS is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_MD is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_BLK_DEV_XD is not set
-CONFIG_PARIDE_PARPORT=y
-# CONFIG_PARIDE is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-CONFIG_SERIAL_SA1100=y
-CONFIG_SERIAL_SA1100_CONSOLE=y
-# CONFIG_SERIAL is not set
-# CONFIG_SERIAL_EXTENDED is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_UNIX98_PTYS is not set
-# CONFIG_MOUSE is not set
-# CONFIG_QIC02_TAPE is not set
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-CONFIG_EMPEG_IR=y
-CONFIG_EMPEG_USB=y
-
-#
-# Video For Linux
-#
-CONFIG_VIDEO_DEV=y
-# CONFIG_RADIO_RTRACK is not set
-# CONFIG_RADIO_RTRACK2 is not set
-# CONFIG_RADIO_AZTECH is not set
-# CONFIG_RADIO_CADET is not set
-# CONFIG_RADIO_MIROPCM20 is not set
-# CONFIG_RADIO_GEMTEK is not set
-CONFIG_RADIO_EMPEG=y
-# CONFIG_VIDEO_BT848 is not set
-# CONFIG_VIDEO_PMS is not set
-# CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_RADIO_SF16FMI is not set
-# CONFIG_RADIO_TYPHOON is not set
-# CONFIG_RADIO_ZOLTRIX is not set
-
-#
-# Joystick support
-#
-# CONFIG_JOYSTICK is not set
-# CONFIG_DTLK is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-# CONFIG_NETLINK is not set
-# CONFIG_FIREWALL is not set
-# CONFIG_FILTER is not set
-# CONFIG_UNIX is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_IP_ROUTER is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_ALIAS is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_RARP is not set
-# CONFIG_SKB_LARGE is not set
-# CONFIG_IPV6 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_LLC is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-# CONFIG_CPU_IS_SLOW is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Amateur Radio support
-#
-# CONFIG_HAMRADIO is not set
-
-#
-# IrDA subsystem support
-#
-# CONFIG_IRDA is not set
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_ARCNET is not set
-# CONFIG_DUMMY is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_NET_ETHERNET is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_DLCI is not set
-CONFIG_PPP=y
-# CONFIG_SLIP is not set
-# CONFIG_NET_RADIO is not set
-# CONFIG_TR is not set
-# CONFIG_SHAPER is not set
-# CONFIG_HOSTESS_SV11 is not set
-# CONFIG_COSA is not set
-# CONFIG_RCPCI is not set
-
-#
-# SCSI support
-#
-# CONFIG_SCSI is not set
-
-#
-# Filesystems
-#
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_FAT_FS is not set
-# CONFIG_MSDOS_FS is not set
-# CONFIG_UMSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_ISO9660_FS is not set
-# CONFIG_JOLIET is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_NTFS_FS is not set
-# CONFIG_HPFS_FS is not set
-CONFIG_PROC_FS=y
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_EXT2_FS=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-# CONFIG_CODA_FS is not set
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SUNRPC is not set
-# CONFIG_LOCKD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_NCP_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_NLS is not set
-
-#
-# Kernel hacking
-#
-CONFIG_FRAME_POINTER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_USER_BACKTRACE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_DEBUG_LL is not set

arch/arm/mach-sa1100/sherman.c

-/*
- * linux/arch/arm/mach-sa1100/sherman.c
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/tty.h>
-
-#include <asm/hardware.h>
-#include <asm/setup.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/serial_sa1100.h>
-
-#include "generic.h"
-
-static void __init sherman_map_io(void)
-{
-	sa1100_map_io();
-
-	sa1100_register_uart(0, 3);
-	sa1100_register_uart(1, 1);
-}
-
-MACHINE_START(SHERMAN, "Blazie Engineering Sherman")
-        BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000)
-        MAPIO(sherman_map_io)
-	INITIRQ(sa1100_init_irq)
-	.timer		= &sa1100_timer,
-MACHINE_END