Commit 5ebabe59 authored by Lars-Peter Clausen's avatar Lars-Peter Clausen Committed by Ralf Baechle

MIPS: JZ4740: Add Kbuild files

Add the Kbuild files for the JZ4740 architecture and adds JZ4740 support
to the MIPS Kbuild files.
Signed-off-by: default avatarLars-Peter Clausen <lars@metafoo.de>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/1406/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
parent c2a529f7
...@@ -9,6 +9,7 @@ platforms += cobalt ...@@ -9,6 +9,7 @@ platforms += cobalt
platforms += dec platforms += dec
platforms += emma platforms += emma
platforms += jazz platforms += jazz
platforms += jz4740
platforms += lasat platforms += lasat
platforms += loongson platforms += loongson
platforms += mipssim platforms += mipssim
......
...@@ -172,6 +172,18 @@ config MACH_JAZZ ...@@ -172,6 +172,18 @@ config MACH_JAZZ
Members include the Acer PICA, MIPS Magnum 4000, MIPS Millennium and Members include the Acer PICA, MIPS Magnum 4000, MIPS Millennium and
Olivetti M700-10 workstations. Olivetti M700-10 workstations.
config MACH_JZ4740
bool "Ingenic JZ4740 based machines"
select SYS_HAS_CPU_MIPS32_R1
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_LITTLE_ENDIAN
select DMA_NONCOHERENT
select IRQ_CPU
select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
select SYS_HAS_EARLY_PRINTK
select HAVE_PWM
config LASAT config LASAT
bool "LASAT Networks platforms" bool "LASAT Networks platforms"
select CEVT_R4K select CEVT_R4K
...@@ -696,6 +708,7 @@ endchoice ...@@ -696,6 +708,7 @@ endchoice
source "arch/mips/alchemy/Kconfig" source "arch/mips/alchemy/Kconfig"
source "arch/mips/bcm63xx/Kconfig" source "arch/mips/bcm63xx/Kconfig"
source "arch/mips/jazz/Kconfig" source "arch/mips/jazz/Kconfig"
source "arch/mips/jz4740/Kconfig"
source "arch/mips/lasat/Kconfig" source "arch/mips/lasat/Kconfig"
source "arch/mips/pmc-sierra/Kconfig" source "arch/mips/pmc-sierra/Kconfig"
source "arch/mips/powertv/Kconfig" source "arch/mips/powertv/Kconfig"
......
choice
prompt "Machine type"
depends on MACH_JZ4740
endchoice
config HAVE_PWM
bool
#
# Makefile for the Ingenic JZ4740.
#
# Object file lists.
obj-y += prom.o irq.o time.o reset.o setup.o dma.o \
gpio.o clock.o platform.o timer.o pwm.o serial.o
obj-$(CONFIG_DEBUG_FS) += clock-debugfs.o
# board specific support
# PM support
obj-$(CONFIG_PM) += pm.o
EXTRA_CFLAGS += -Werror -Wall
core-$(CONFIG_MACH_JZ4740) += arch/mips/jz4740/
cflags-$(CONFIG_MACH_JZ4740) += -I$(srctree)/arch/mips/include/asm/mach-jz4740
load-$(CONFIG_MACH_JZ4740) += 0xffffffff80010000
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment