Commit 5f1a067b authored by Pramod Kumar's avatar Pramod Kumar Committed by David S. Miller

dt: mdio-mux: Add mdio multiplexer driver node

Add integrated MDIO multiplexer driver node which contains
two mux PCIe bus and one ethernet bus along with phys
lying on these bus.
Signed-off-by: default avatarPramod Kumar <pramod.kumar@broadcom.com>
Acked-by: default avatarRob Herring <robh@kernel.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent ce8d5dbf
...@@ -52,6 +52,14 @@ memory { ...@@ -52,6 +52,14 @@ memory {
}; };
}; };
&pci_phy0 {
status = "ok";
};
&pci_phy1 {
status = "ok";
};
&pcie0 { &pcie0 {
status = "ok"; status = "ok";
}; };
...@@ -132,3 +140,11 @@ nandcs@0 { ...@@ -132,3 +140,11 @@ nandcs@0 {
#size-cells = <1>; #size-cells = <1>;
}; };
}; };
&mdio_mux_iproc {
mdio@10 {
gphy0: eth-phy@10 {
reg = <0x10>;
};
};
};
...@@ -263,6 +263,45 @@ gic: interrupt-controller@65210000 { ...@@ -263,6 +263,45 @@ gic: interrupt-controller@65210000 {
IRQ_TYPE_LEVEL_HIGH)>; IRQ_TYPE_LEVEL_HIGH)>;
}; };
mdio_mux_iproc: mdio-mux@6602023c {
compatible = "brcm,mdio-mux-iproc";
reg = <0x6602023c 0x14>;
#address-cells = <1>;
#size-cells = <0>;
mdio@0 {
reg = <0x0>;
#address-cells = <1>;
#size-cells = <0>;
pci_phy0: pci-phy@0 {
compatible = "brcm,ns2-pcie-phy";
reg = <0x0>;
#phy-cells = <0>;
status = "disabled";
};
};
mdio@7 {
reg = <0x7>;
#address-cells = <1>;
#size-cells = <0>;
pci_phy1: pci-phy@0 {
compatible = "brcm,ns2-pcie-phy";
reg = <0x0>;
#phy-cells = <0>;
status = "disabled";
};
};
mdio@10 {
reg = <0x10>;
#address-cells = <1>;
#size-cells = <0>;
};
};
timer0: timer@66030000 { timer0: timer@66030000 {
compatible = "arm,sp804", "arm,primecell"; compatible = "arm,sp804", "arm,primecell";
reg = <0x66030000 0x1000>; reg = <0x66030000 0x1000>;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment