x86/mce: Recognise machine check bank signature for data path error

Action required data path signature is defined in table 15-19 of SDM:

+-----------------------------------------------------------------------------+
| SRAR Error | Valid | OVER | UC | EN | MISCV | ADDRV | PCC | S | AR | MCACOD |
| Data Load  |     1 |    0 |  1 |  1 |     1 |     1 |   0 | 1 |  1 |  0x134 |
+-----------------------------------------------------------------------------+

Recognise this, and pass MCE_AR_SEVERITY code back to do_machine_check() if
we have the action handler configured (CONFIG_MEMORY_FAILURE=y)
Acked-by: Borislav Petkov <bp@amd64.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>

arch/x86/kernel/cpu/mcheck/mce-severity.c

@@ -54,6 +54,7 @@ static struct severity {
 #define  MASK(x, y)	.mask = x, .result = y
 #define MCI_UC_S (MCI_STATUS_UC|MCI_STATUS_S)
 #define MCI_UC_SAR (MCI_STATUS_UC|MCI_STATUS_S|MCI_STATUS_AR)
+#define	MCI_ADDR (MCI_STATUS_ADDRV|MCI_STATUS_MISCV)
 #define MCACOD 0xffff
 
 	MCESEV(
@@ -102,11 +103,24 @@ static struct severity {
 		SER, BITCLR(MCI_STATUS_S)
 		),
 
-	/* AR add known MCACODs here */
 	MCESEV(
 		PANIC, "Action required with lost events",
 		SER, BITSET(MCI_STATUS_OVER|MCI_UC_SAR)
 		),
+
+	/* known AR MCACODs: */
+#ifdef	CONFIG_MEMORY_FAILURE
+	MCESEV(
+		KEEP, "HT thread notices Action required: data load error",
+		SER, MASK(MCI_STATUS_OVER|MCI_UC_SAR|MCI_ADDR|MCACOD, MCI_UC_SAR|MCI_ADDR|0x0134),
+		MCGMASK(MCG_STATUS_EIPV, 0)
+		),
+	MCESEV(
+		AR, "Action required: data load error",
+		SER, MASK(MCI_STATUS_OVER|MCI_UC_SAR|MCI_ADDR|MCACOD, MCI_UC_SAR|MCI_ADDR|0x0134),
+		USER
+		),
+#endif
 	MCESEV(
 		PANIC, "Action required: unknown MCACOD",
 		SER, MASK(MCI_STATUS_OVER|MCI_UC_SAR, MCI_UC_SAR)