Commit 5f9a31d6 authored by Alan Cox's avatar Alan Cox Committed by Greg Kroah-Hartman

n_gsm: clean up printks

[Original From Ken Mills but I redid it using pr_ helpers instead]

Also fix up coding style, there are two warnings left but that is where
the CodingStyle tools blow up because they cannot handle

	if (blah) {
		foo
	} else switch (x) {
		case 1:
		}
Signed-off-by: default avatarAlan Cox <alan@linux.intel.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
parent c2f2f000
......@@ -19,7 +19,7 @@
*
* TO DO:
* Mostly done: ioctls for setting modes/timing
* Partly done: hooks so you can pull off frames to non tty devs
* Partly done: hooks so you can pull off frames to non tty devs
* Restart DLCI 0 when it closes ?
* Test basic encoding
* Improve the tx engine
......@@ -73,8 +73,10 @@ module_param(debug, int, 0600);
#define T2 (2 * HZ)
#endif
/* Semi-arbitary buffer size limits. 0710 is normally run with 32-64 byte
limits so this is plenty */
/*
* Semi-arbitary buffer size limits. 0710 is normally run with 32-64 byte
* limits so this is plenty
*/
#define MAX_MRU 512
#define MAX_MTU 512
......@@ -290,7 +292,7 @@ static spinlock_t gsm_mux_lock;
#define MDM_DV 0x40
#define GSM0_SOF 0xF9
#define GSM1_SOF 0x7E
#define GSM1_SOF 0x7E
#define GSM1_ESCAPE 0x7D
#define GSM1_ESCAPE_BITS 0x20
#define XON 0x11
......@@ -433,61 +435,63 @@ static void gsm_print_packet(const char *hdr, int addr, int cr,
if (!(debug & 1))
return;
printk(KERN_INFO "%s %d) %c: ", hdr, addr, "RC"[cr]);
pr_info("%s %d) %c: ", hdr, addr, "RC"[cr]);
switch (control & ~PF) {
case SABM:
printk(KERN_CONT "SABM");
pr_cont("SABM");
break;
case UA:
printk(KERN_CONT "UA");
pr_cont("UA");
break;
case DISC:
printk(KERN_CONT "DISC");
pr_cont("DISC");
break;
case DM:
printk(KERN_CONT "DM");
pr_cont("DM");
break;
case UI:
printk(KERN_CONT "UI");
pr_cont("UI");
break;
case UIH:
printk(KERN_CONT "UIH");
pr_cont("UIH");
break;
default:
if (!(control & 0x01)) {
printk(KERN_CONT "I N(S)%d N(R)%d",
(control & 0x0E) >> 1, (control & 0xE)>> 5);
pr_cont("I N(S)%d N(R)%d",
(control & 0x0E) >> 1, (control & 0xE) >> 5);
} else switch (control & 0x0F) {
case RR:
printk("RR(%d)", (control & 0xE0) >> 5);
break;
case RNR:
printk("RNR(%d)", (control & 0xE0) >> 5);
break;
case REJ:
printk("REJ(%d)", (control & 0xE0) >> 5);
break;
default:
printk(KERN_CONT "[%02X]", control);
case RR:
pr_cont("RR(%d)", (control & 0xE0) >> 5);
break;
case RNR:
pr_cont("RNR(%d)", (control & 0xE0) >> 5);
break;
case REJ:
pr_cont("REJ(%d)", (control & 0xE0) >> 5);
break;
default:
pr_cont("[%02X]", control);
}
}
if (control & PF)
printk(KERN_CONT "(P)");
pr_cont("(P)");
else
printk(KERN_CONT "(F)");
pr_cont("(F)");
if (dlen) {
int ct = 0;
while (dlen--) {
if (ct % 8 == 0)
printk(KERN_CONT "\n ");
printk(KERN_CONT "%02X ", *data++);
if (ct % 8 == 0) {
pr_cont("\n");
pr_debug(" ");
}
pr_cont("%02X ", *data++);
ct++;
}
}
printk(KERN_CONT "\n");
pr_cont("\n");
}
......@@ -526,11 +530,13 @@ static void hex_packet(const unsigned char *p, int len)
{
int i;
for (i = 0; i < len; i++) {
if (i && (i % 16) == 0)
printk("\n");
printk("%02X ", *p++);
if (i && (i % 16) == 0) {
pr_cont("\n");
pr_debug("");
}
pr_cont("%02X ", *p++);
}
printk("\n");
pr_cont("\n");
}
/**
......@@ -680,7 +686,7 @@ static void gsm_data_kick(struct gsm_mux *gsm)
}
if (debug & 4) {
printk("gsm_data_kick: \n");
pr_debug("gsm_data_kick:\n");
hex_packet(gsm->txframe, len);
}
......@@ -1233,7 +1239,7 @@ static void gsm_control_response(struct gsm_mux *gsm, unsigned int command,
}
/**
* gsm_control_transmit - send control packet
* gsm_control_transmit - send control packet
* @gsm: gsm mux
* @ctrl: frame to send
*
......@@ -1363,7 +1369,7 @@ static void gsm_dlci_close(struct gsm_dlci *dlci)
{
del_timer(&dlci->t1);
if (debug & 8)
printk("DLCI %d goes closed.\n", dlci->addr);
pr_debug("DLCI %d goes closed.\n", dlci->addr);
dlci->state = DLCI_CLOSED;
if (dlci->addr != 0) {
struct tty_struct *tty = tty_port_tty_get(&dlci->port);
......@@ -1394,7 +1400,7 @@ static void gsm_dlci_open(struct gsm_dlci *dlci)
/* This will let a tty open continue */
dlci->state = DLCI_OPEN;
if (debug & 8)
printk("DLCI %d goes open.\n", dlci->addr);
pr_debug("DLCI %d goes open.\n", dlci->addr);
wake_up(&dlci->gsm->event);
}
......@@ -1496,29 +1502,29 @@ static void gsm_dlci_data(struct gsm_dlci *dlci, u8 *data, int len)
unsigned int modem = 0;
if (debug & 16)
printk("%d bytes for tty %p\n", len, tty);
pr_debug("%d bytes for tty %p\n", len, tty);
if (tty) {
switch (dlci->adaption) {
/* Unsupported types */
/* Packetised interruptible data */
case 4:
break;
/* Packetised uininterruptible voice/data */
case 3:
break;
/* Asynchronous serial with line state in each frame */
case 2:
while (gsm_read_ea(&modem, *data++) == 0) {
len--;
if (len == 0)
return;
}
gsm_process_modem(tty, dlci, modem);
/* Line state will go via DLCI 0 controls only */
case 1:
default:
tty_insert_flip_string(tty, data, len);
tty_flip_buffer_push(tty);
/* Unsupported types */
/* Packetised interruptible data */
case 4:
break;
/* Packetised uininterruptible voice/data */
case 3:
break;
/* Asynchronous serial with line state in each frame */
case 2:
while (gsm_read_ea(&modem, *data++) == 0) {
len--;
if (len == 0)
return;
}
gsm_process_modem(tty, dlci, modem);
/* Line state will go via DLCI 0 controls only */
case 1:
default:
tty_insert_flip_string(tty, data, len);
tty_flip_buffer_push(tty);
}
tty_kref_put(tty);
}
......@@ -1656,7 +1662,7 @@ static void gsm_queue(struct gsm_mux *gsm)
if (gsm->fcs != GOOD_FCS) {
gsm->bad_fcs++;
if (debug & 4)
printk("BAD FCS %02x\n", gsm->fcs);
pr_debug("BAD FCS %02x\n", gsm->fcs);
return;
}
address = gsm->address >> 1;
......@@ -1890,7 +1896,7 @@ static void gsm1_receive(struct gsm_mux *gsm, unsigned char c)
gsm->state = GSM_DATA;
break;
case GSM_DATA: /* Data */
if (gsm->count > gsm->mru ) { /* Allow one for the FCS */
if (gsm->count > gsm->mru) { /* Allow one for the FCS */
gsm->state = GSM_OVERRUN;
gsm->bad_size++;
} else
......@@ -2085,7 +2091,7 @@ static int gsmld_output(struct gsm_mux *gsm, u8 *data, int len)
return -ENOSPC;
}
if (debug & 4) {
printk("-->%d bytes out\n", len);
pr_debug("-->%d bytes out\n", len);
hex_packet(data, len);
}
gsm->tty->ops->write(gsm->tty, data, len);
......@@ -2142,7 +2148,7 @@ static void gsmld_receive_buf(struct tty_struct *tty, const unsigned char *cp,
char flags;
if (debug & 4) {
printk("Inbytes %dd\n", count);
pr_debug("Inbytes %dd\n", count);
hex_packet(cp, count);
}
......@@ -2159,7 +2165,7 @@ static void gsmld_receive_buf(struct tty_struct *tty, const unsigned char *cp,
gsm->error(gsm, *dp, flags);
break;
default:
printk(KERN_ERR "%s: unknown flag %d\n",
WARN_ONCE("%s: unknown flag %d\n",
tty_name(tty, buf), flags);
break;
}
......@@ -2354,7 +2360,7 @@ static int gsmld_config(struct tty_struct *tty, struct gsm_mux *gsm,
int need_restart = 0;
/* Stuff we don't support yet - UI or I frame transport, windowing */
if ((c->adaption !=1 && c->adaption != 2) || c->k)
if ((c->adaption != 1 && c->adaption != 2) || c->k)
return -EOPNOTSUPP;
/* Check the MRU/MTU range looks sane */
if (c->mru > MAX_MRU || c->mtu > MAX_MTU || c->mru < 8 || c->mtu < 8)
......@@ -2448,7 +2454,7 @@ static int gsmld_ioctl(struct tty_struct *tty, struct file *file,
c.i = 1;
else
c.i = 2;
printk("Ftype %d i %d\n", gsm->ftype, c.i);
pr_debug("Ftype %d i %d\n", gsm->ftype, c.i);
c.mru = gsm->mru;
c.mtu = gsm->mtu;
c.k = 0;
......@@ -2742,14 +2748,15 @@ static int __init gsm_init(void)
/* Fill in our line protocol discipline, and register it */
int status = tty_register_ldisc(N_GSM0710, &tty_ldisc_packet);
if (status != 0) {
printk(KERN_ERR "n_gsm: can't register line discipline (err = %d)\n", status);
pr_err("n_gsm: can't register line discipline (err = %d)\n",
status);
return status;
}
gsm_tty_driver = alloc_tty_driver(256);
if (!gsm_tty_driver) {
tty_unregister_ldisc(N_GSM0710);
printk(KERN_ERR "gsm_init: tty allocation failed.\n");
pr_err("gsm_init: tty allocation failed.\n");
return -EINVAL;
}
gsm_tty_driver->owner = THIS_MODULE;
......@@ -2760,7 +2767,7 @@ static int __init gsm_init(void)
gsm_tty_driver->type = TTY_DRIVER_TYPE_SERIAL;
gsm_tty_driver->subtype = SERIAL_TYPE_NORMAL;
gsm_tty_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV
| TTY_DRIVER_HARDWARE_BREAK;
| TTY_DRIVER_HARDWARE_BREAK;
gsm_tty_driver->init_termios = tty_std_termios;
/* Fixme */
gsm_tty_driver->init_termios.c_lflag &= ~ECHO;
......@@ -2771,10 +2778,11 @@ static int __init gsm_init(void)
if (tty_register_driver(gsm_tty_driver)) {
put_tty_driver(gsm_tty_driver);
tty_unregister_ldisc(N_GSM0710);
printk(KERN_ERR "gsm_init: tty registration failed.\n");
pr_err("gsm_init: tty registration failed.\n");
return -EBUSY;
}
printk(KERN_INFO "gsm_init: loaded as %d,%d.\n", gsm_tty_driver->major, gsm_tty_driver->minor_start);
pr_debug("gsm_init: loaded as %d,%d.\n",
gsm_tty_driver->major, gsm_tty_driver->minor_start);
return 0;
}
......@@ -2782,10 +2790,10 @@ static void __exit gsm_exit(void)
{
int status = tty_unregister_ldisc(N_GSM0710);
if (status != 0)
printk(KERN_ERR "n_gsm: can't unregister line discipline (err = %d)\n", status);
pr_err("n_gsm: can't unregister line discipline (err = %d)\n",
status);
tty_unregister_driver(gsm_tty_driver);
put_tty_driver(gsm_tty_driver);
printk(KERN_INFO "gsm_init: unloaded.\n");
}
module_init(gsm_init);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment