Commit 5fa7ac9c authored by Jani Nikula's avatar Jani Nikula Committed by Daniel Vetter

drm/i915: fix sdvo hotplug support check and activation

The sdvo hotplug support check and activation has worked by coincidence for
TMDS0. The boolean value returned by intel_sdvo_supports_hotplug() was
masked with a bit shifted by device number, which also should have been one
of SDVO_OUTPUT_* bits instead. Boolean true masked with 1 shifted by 0 just
happened to match SDVO_OUTPUT_TMDS0...

Get hotplug support as a bit mask, check the correct bits for support, and
use the correct bits for activating hotplug support.
Signed-off-by: default avatarJani Nikula <jani.nikula@intel.com>
Reviewed-by: default avatarSimon Farnsworth <simon.farnsworth@onelan.com>
Signed-off-by: default avatarDaniel Vetter <daniel.vetter@ffwll.ch>
parent ff04b35a
......@@ -97,7 +97,7 @@ struct intel_sdvo {
/*
* Hotplug activation bits for this device
*/
uint8_t hotplug_active[2];
uint16_t hotplug_active;
/**
* This is used to select the color range of RBG outputs in HDMI mode.
......@@ -1251,25 +1251,29 @@ static bool intel_sdvo_get_capabilities(struct intel_sdvo *intel_sdvo, struct in
return true;
}
static int intel_sdvo_supports_hotplug(struct intel_sdvo *intel_sdvo)
static uint16_t intel_sdvo_get_hotplug_support(struct intel_sdvo *intel_sdvo)
{
struct drm_device *dev = intel_sdvo->base.base.dev;
u8 response[2];
uint16_t hotplug;
/* HW Erratum: SDVO Hotplug is broken on all i945G chips, there's noise
* on the line. */
if (IS_I945G(dev) || IS_I945GM(dev))
return false;
return 0;
if (!intel_sdvo_get_value(intel_sdvo, SDVO_CMD_GET_HOT_PLUG_SUPPORT,
&hotplug, sizeof(hotplug)))
return 0;
return intel_sdvo_get_value(intel_sdvo, SDVO_CMD_GET_HOT_PLUG_SUPPORT,
&response, 2) && response[0];
return hotplug;
}
static void intel_sdvo_enable_hotplug(struct intel_encoder *encoder)
{
struct intel_sdvo *intel_sdvo = to_intel_sdvo(&encoder->base);
intel_sdvo_write_cmd(intel_sdvo, SDVO_CMD_SET_ACTIVE_HOT_PLUG, &intel_sdvo->hotplug_active, 2);
intel_sdvo_write_cmd(intel_sdvo, SDVO_CMD_SET_ACTIVE_HOT_PLUG,
&intel_sdvo->hotplug_active, 2);
}
static bool
......@@ -2061,17 +2065,18 @@ intel_sdvo_dvi_init(struct intel_sdvo *intel_sdvo, int device)
intel_connector = &intel_sdvo_connector->base;
connector = &intel_connector->base;
if (intel_sdvo_supports_hotplug(intel_sdvo) & (1 << device)) {
if (intel_sdvo_get_hotplug_support(intel_sdvo) &
intel_sdvo_connector->output_flag) {
connector->polled = DRM_CONNECTOR_POLL_HPD;
intel_sdvo->hotplug_active[0] |= 1 << device;
intel_sdvo->hotplug_active |= intel_sdvo_connector->output_flag;
/* Some SDVO devices have one-shot hotplug interrupts.
* Ensure that they get re-enabled when an interrupt happens.
*/
intel_encoder->hot_plug = intel_sdvo_enable_hotplug;
intel_sdvo_enable_hotplug(intel_encoder);
}
else
} else {
connector->polled = DRM_CONNECTOR_POLL_CONNECT | DRM_CONNECTOR_POLL_DISCONNECT;
}
encoder->encoder_type = DRM_MODE_ENCODER_TMDS;
connector->connector_type = DRM_MODE_CONNECTOR_DVID;
......@@ -2587,7 +2592,7 @@ bool intel_sdvo_init(struct drm_device *dev, uint32_t sdvo_reg, bool is_sdvob)
/* Only enable the hotplug irq if we need it, to work around noisy
* hotplug lines.
*/
if (intel_sdvo->hotplug_active[0])
if (intel_sdvo->hotplug_active)
dev_priv->hotplug_supported_mask |= hotplug_mask;
intel_sdvo_select_ddc_bus(dev_priv, intel_sdvo, sdvo_reg);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment