Merge remote-tracking branches 'regulator/topic/act8865',...

Merge remote-tracking branches 'regulator/topic/act8865', 'regulator/topic/can-change-voltage', 'regulator/topic/da9210' and 'regulator/topic/da9211' into regulator-next

Documentation/devicetree/bindings/regulator/da9210.txt

-* Dialog Semiconductor DA9210 Voltage Regulator
+* Dialog Semiconductor DA9210 Multi-phase 12A DCDC BUCK Converter
 
 Required properties:
 
@@ -18,8 +18,12 @@ Example:
 		compatible = "dlg,da9210";
 		reg = <0x68>;
 
-		regulator-min-microvolt = <900000>;
-		regulator-max-microvolt = <1000000>;
+		interrupt-parent = <...>;
+		interrupts = <...>;
+
+		regulator-min-microvolt = <300000>;
+		regulator-max-microvolt = <1570000>;
+		regulator-min-microamp = <1600000>;
+		regulator-max-microamp = <4600000>;
 		regulator-boot-on;
-		regulator-always-on;
 	};

Documentation/devicetree/bindings/regulator/da9211.txt

-* Dialog Semiconductor DA9211/DA9213/DA9215 Voltage Regulator
+* Dialog Semiconductor DA9211/DA9212/DA9213/DA9214/DA9215 Voltage Regulator
 
 Required properties:
-- compatible: "dlg,da9211" or "dlg,da9213" or "dlg,da9215"
+- compatible: "dlg,da9211" or "dlg,da9212" or "dlg,da9213"
+  or "dlg,da9214" or "dlg,da9215"
 - reg: I2C slave address, usually 0x68.
 - interrupts: the interrupt outputs of the controller
 - regulators: A node that houses a sub-node for each regulator within the
@@ -21,6 +22,25 @@ Example 1) DA9211
 		reg = <0x68>;
 		interrupts = <3 27>;
 
+		regulators {
+			BUCKA {
+				regulator-name = "VBUCKA";
+				regulator-min-microvolt = < 300000>;
+				regulator-max-microvolt = <1570000>;
+				regulator-min-microamp 	= <2000000>;
+				regulator-max-microamp 	= <5000000>;
+				enable-gpios = <&gpio 27 0>;
+			};
+		};
+	};
+
+Example 2) DA9212
+
+	pmic: da9212@68 {
+		compatible = "dlg,da9212";
+		reg = <0x68>;
+		interrupts = <3 27>;
+
 		regulators {
 			BUCKA {
 				regulator-name = "VBUCKA";
@@ -41,12 +61,30 @@ Example 1) DA9211
 		};
 	};
 
-Example 2) DA9213
+Example 3) DA9213
 	pmic: da9213@68 {
 		compatible = "dlg,da9213";
 		reg = <0x68>;
 		interrupts = <3 27>;
 
+		regulators {
+			BUCKA {
+				regulator-name = "VBUCKA";
+				regulator-min-microvolt = < 300000>;
+				regulator-max-microvolt = <1570000>;
+				regulator-min-microamp 	= <3000000>;
+				regulator-max-microamp 	= <6000000>;
+				enable-gpios = <&gpio 27 0>;
+			};
+		};
+	};
+
+Example 4) DA9214
+	pmic: da9214@68 {
+		compatible = "dlg,da9214";
+		reg = <0x68>;
+		interrupts = <3 27>;
+
 		regulators {
 			BUCKA {
 				regulator-name = "VBUCKA";
@@ -67,8 +105,7 @@ Example 2) DA9213
 		};
 	};
 
-
-Example 3) DA9215
+Example 5) DA9215
 	pmic: da9215@68 {
 		compatible = "dlg,da9215";
 		reg = <0x68>;

drivers/regulator/act8865-regulator.c

@@ -395,12 +395,6 @@ static int act8865_pdata_from_dt(struct device *dev,
 	struct act8865_regulator_data *regulator;
 	struct of_regulator_match *matches;
 
-	np = of_get_child_by_name(dev->of_node, "regulators");
-	if (!np) {
-		dev_err(dev, "missing 'regulators' subnode in DT\n");
-		return -EINVAL;
-	}
-
 	switch (type) {
 	case ACT8600:
 		matches = act8600_matches;
@@ -419,6 +413,12 @@ static int act8865_pdata_from_dt(struct device *dev,
 		return -EINVAL;
 	}
 
+	np = of_get_child_by_name(dev->of_node, "regulators");
+	if (!np) {
+		dev_err(dev, "missing 'regulators' subnode in DT\n");
+		return -EINVAL;
+	}
+
 	matched = of_regulator_match(dev, np, matches, num_matches);
 	of_node_put(np);
 	if (matched <= 0)

drivers/regulator/core.c

@@ -2508,33 +2508,6 @@ int regulator_is_enabled(struct regulator *regulator)
 }
 EXPORT_SYMBOL_GPL(regulator_is_enabled);
 
-/**
- * regulator_can_change_voltage - check if regulator can change voltage
- * @regulator: regulator source
- *
- * Returns positive if the regulator driver backing the source/client
- * can change its voltage, false otherwise. Useful for detecting fixed
- * or dummy regulators and disabling voltage change logic in the client
- * driver.
- */
-int regulator_can_change_voltage(struct regulator *regulator)
-{
-	struct regulator_dev	*rdev = regulator->rdev;
-
-	if (regulator_ops_is_valid(rdev, REGULATOR_CHANGE_VOLTAGE)) {
-		if (rdev->desc->n_voltages - rdev->desc->linear_min_sel > 1)
-			return 1;
-
-		if (rdev->desc->continuous_voltage_range &&
-		    rdev->constraints->min_uV && rdev->constraints->max_uV &&
-		    rdev->constraints->min_uV != rdev->constraints->max_uV)
-			return 1;
-	}
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(regulator_can_change_voltage);
-
 /**
  * regulator_count_voltages - count regulator_list_voltage() selectors
  * @regulator: regulator source

drivers/regulator/da9210-regulator.c

@@ -21,12 +21,11 @@
 #include <linux/err.h>
 #include <linux/i2c.h>
 #include <linux/module.h>
-#include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
-#include <linux/slab.h>
 #include <linux/regulator/driver.h>
 #include <linux/regulator/machine.h>
+#include <linux/of_device.h>
 #include <linux/regulator/of_regulator.h>
 #include <linux/regmap.h>
 
@@ -179,6 +178,13 @@ static irqreturn_t da9210_irq_handler(int irq, void *data)
 /*
  * I2C driver interface functions
  */
+
+static const struct of_device_id da9210_dt_ids[] = {
+	{ .compatible = "dlg,da9210", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, da9210_dt_ids);
+
 static int da9210_i2c_probe(struct i2c_client *i2c,
 			    const struct i2c_device_id *id)
 {
@@ -188,6 +194,16 @@ static int da9210_i2c_probe(struct i2c_client *i2c,
 	struct regulator_dev *rdev = NULL;
 	struct regulator_config config = { };
 	int error;
+	const struct of_device_id *match;
+
+	if (i2c->dev.of_node && !pdata) {
+		match = of_match_device(of_match_ptr(da9210_dt_ids),
+						&i2c->dev);
+		if (!match) {
+			dev_err(&i2c->dev, "Error: No device match found\n");
+			return -ENODEV;
+		}
+	}
 
 	chip = devm_kzalloc(&i2c->dev, sizeof(struct da9210), GFP_KERNEL);
 	if (!chip)
@@ -264,6 +280,7 @@ MODULE_DEVICE_TABLE(i2c, da9210_i2c_id);
 static struct i2c_driver da9210_regulator_driver = {
 	.driver = {
 		.name = "da9210",
+		.of_match_table = of_match_ptr(da9210_dt_ids),
 	},
 	.probe = da9210_i2c_probe,
 	.id_table = da9210_i2c_id,

drivers/regulator/da9211-regulator.c

 /*
- * da9211-regulator.c - Regulator device driver for DA9211/DA9213/DA9215
+ * da9211-regulator.c - Regulator device driver for DA9211/DA9212
+ * /DA9213/DA9214/DA9215
  * Copyright (C) 2015  Dialog Semiconductor Ltd.
  *
  * This library is free software; you can redistribute it and/or
@@ -493,7 +494,9 @@ static int da9211_i2c_probe(struct i2c_client *i2c,
 
 static const struct i2c_device_id da9211_i2c_id[] = {
 	{"da9211", DA9211},
+	{"da9212", DA9212},
 	{"da9213", DA9213},
+	{"da9214", DA9214},
 	{"da9215", DA9215},
 	{},
 };
@@ -502,8 +505,10 @@ MODULE_DEVICE_TABLE(i2c, da9211_i2c_id);
 #ifdef CONFIG_OF
 static const struct of_device_id da9211_dt_ids[] = {
 	{ .compatible = "dlg,da9211", .data = &da9211_i2c_id[0] },
-	{ .compatible = "dlg,da9213", .data = &da9211_i2c_id[1] },
-	{ .compatible = "dlg,da9215", .data = &da9211_i2c_id[2] },
+	{ .compatible = "dlg,da9212", .data = &da9211_i2c_id[1] },
+	{ .compatible = "dlg,da9213", .data = &da9211_i2c_id[2] },
+	{ .compatible = "dlg,da9214", .data = &da9211_i2c_id[3] },
+	{ .compatible = "dlg,da9215", .data = &da9211_i2c_id[4] },
 	{},
 };
 MODULE_DEVICE_TABLE(of, da9211_dt_ids);
@@ -521,5 +526,5 @@ static struct i2c_driver da9211_regulator_driver = {
 module_i2c_driver(da9211_regulator_driver);
 
 MODULE_AUTHOR("James Ban <James.Ban.opensource@diasemi.com>");
-MODULE_DESCRIPTION("Regulator device driver for Dialog DA9211/DA9213/DA9215");
+MODULE_DESCRIPTION("DA9211/DA9212/DA9213/DA9214/DA9215 regulator driver");
 MODULE_LICENSE("GPL");

drivers/regulator/da9211-regulator.h

 /*
- * da9211-regulator.h - Regulator definitions for DA9211/DA9213/DA9215
+ * da9211-regulator.h - Regulator definitions for DA9211/DA9212
+ * /DA9213/DA9214/DA9215
  * Copyright (C) 2015  Dialog Semiconductor Ltd.
  *
  * This program is free software; you can redistribute it and/or

include/linux/regulator/consumer.h

@@ -224,7 +224,6 @@ int regulator_bulk_force_disable(int num_consumers,
 void regulator_bulk_free(int num_consumers,
 			 struct regulator_bulk_data *consumers);
 
-int regulator_can_change_voltage(struct regulator *regulator);
 int regulator_count_voltages(struct regulator *regulator);
 int regulator_list_voltage(struct regulator *regulator, unsigned selector);
 int regulator_is_supported_voltage(struct regulator *regulator,
@@ -436,11 +435,6 @@ static inline void regulator_bulk_free(int num_consumers,
 {
 }
 
-static inline int regulator_can_change_voltage(struct regulator *regulator)
-{
-	return 0;
-}
-
 static inline int regulator_set_voltage(struct regulator *regulator,
 					int min_uV, int max_uV)
 {

include/linux/regulator/da9211.h

 /*
- * da9211.h - Regulator device driver for DA9211/DA9213/DA9215
+ * da9211.h - Regulator device driver for DA9211/DA9212
+ * /DA9213/DA9214/DA9215
  * Copyright (C) 2015  Dialog Semiconductor Ltd.
  *
  * This program is free software; you can redistribute it and/or
@@ -22,7 +23,9 @@
 
 enum da9211_chip_id {
 	DA9211,
+	DA9212,
 	DA9213,
+	DA9214,
 	DA9215,
 };