Merge master.kernel.org:/home/rmk/linux-2.6-arm

* master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] 5543/1: arm: serial amba: add missing declaration in serial.h
  [ARM] pxa: fix pxa27x_udc default pullup GPIO
  [ARM] pxa/imote2: fix UCAM sensor board ADC model number
  mx[23]: don't put clock lookups in __initdata
  fix oops when using console=ttymxcN with N > 0
  [ARM] ARMv7 errata: only apply fixes when running on applicable CPU
  [ARM] 5534/1: kmalloc must return a cache line aligned buffer

arch/arm/include/asm/cache.h

@@ -7,4 +7,20 @@
 #define L1_CACHE_SHIFT		5
 #define L1_CACHE_BYTES		(1 << L1_CACHE_SHIFT)
 
+/*
+ * Memory returned by kmalloc() may be used for DMA, so we must make
+ * sure that all such allocations are cache aligned. Otherwise,
+ * unrelated code may cause parts of the buffer to be read into the
+ * cache before the transfer is done, causing old data to be seen by
+ * the CPU.
+ */
+#define ARCH_KMALLOC_MINALIGN	L1_CACHE_BYTES
+
+/*
+ * With EABI on ARMv5 and above we must have 64-bit aligned slab pointers.
+ */
+#if defined(CONFIG_AEABI) && (__LINUX_ARM_ARCH__ >= 5)
+#define ARCH_SLAB_MINALIGN 8
+#endif
+
 #endif

arch/arm/include/asm/page.h

@@ -202,13 +202,6 @@ typedef struct page *pgtable_t;
 	(((current->personality & READ_IMPLIES_EXEC) ? VM_EXEC : 0) | \
 	 VM_READ | VM_WRITE | VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
 
-/*
- * With EABI on ARMv5 and above we must have 64-bit aligned slab pointers.
- */
-#if defined(CONFIG_AEABI) && (__LINUX_ARM_ARCH__ >= 5)
-#define ARCH_SLAB_MINALIGN 8
-#endif
-
 #include <asm-generic/page.h>
 
 #endif

arch/arm/mach-mx2/clock_imx21.c

@@ -890,7 +890,7 @@ static struct clk clko_clk = {
 		.con_id = n, \
 		.clk = &c, \
 	},
-static struct clk_lookup lookups[] __initdata = {
+static struct clk_lookup lookups[] = {
 /* It's unlikely that any driver wants one of them directly:
 	_REGISTER_CLOCK(NULL, "ckih", ckih_clk)
 	_REGISTER_CLOCK(NULL, "ckil", ckil_clk)

arch/arm/mach-mx2/clock_imx27.c

@@ -621,7 +621,7 @@ DEFINE_CLOCK1(csi_clk,     0, 0,      0, parent, &csi_clk1, &per4_clk);
 		.clk = &c, \
 	},
 
-static struct clk_lookup lookups[] __initdata = {
+static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk)
 	_REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk)
 	_REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk)

arch/arm/mach-mx3/clock-imx35.c

@@ -404,7 +404,7 @@ DEFINE_CLOCK(gpu2d_clk,  0, CCM_CGR3,  4, NULL, NULL);
 		.clk = &c,		\
 	},
 
-static struct clk_lookup lookups[] __initdata = {
+static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK(NULL, "asrc", asrc_clk)
 	_REGISTER_CLOCK(NULL, "ata", ata_clk)
 	_REGISTER_CLOCK(NULL, "audmux", audmux_clk)

arch/arm/mach-mx3/clock.c

@@ -516,7 +516,7 @@ DEFINE_CLOCK(ipg_clk,     0, NULL,          0, ipg_get_rate, NULL, &ahb_clk);
 		.clk = &c, \
 	},
 
-static struct clk_lookup lookups[] __initdata = {
+static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK(NULL, "emi", emi_clk)
 	_REGISTER_CLOCK(NULL, "cspi", cspi1_clk)
 	_REGISTER_CLOCK(NULL, "cspi", cspi2_clk)

arch/arm/mach-pxa/devices.c

@@ -72,7 +72,10 @@ void __init pxa_set_mci_info(struct pxamci_platform_data *info)
 }
 
 
-static struct pxa2xx_udc_mach_info pxa_udc_info;
+static struct pxa2xx_udc_mach_info pxa_udc_info = {
+	.gpio_pullup = -1,
+	.gpio_vbus   = -1,
+};
 
 void __init pxa_set_udc_info(struct pxa2xx_udc_mach_info *info)
 {

arch/arm/mach-pxa/imote2.c

@@ -412,7 +412,7 @@ static struct platform_device imote2_flash_device = {
  */
 static struct i2c_board_info __initdata imote2_i2c_board_info[] = {
 	{ /* UCAM sensor board */
-		.type = "max1238",
+		.type = "max1239",
 		.addr = 0x35,
 	}, { /* ITS400 Sensor board only */
 		.type = "max1363",

arch/arm/mm/proc-v7.S

@@ -184,23 +184,37 @@ __v7_setup:
 	stmia	r12, {r0-r5, r7, r9, r11, lr}
 	bl	v7_flush_dcache_all
 	ldmia	r12, {r0-r5, r7, r9, r11, lr}
+
+	mrc	p15, 0, r0, c0, c0, 0		@ read main ID register
+	and	r10, r0, #0xff000000		@ ARM?
+	teq	r10, #0x41000000
+	bne	2f
+	and	r5, r0, #0x00f00000		@ variant
+	and	r6, r0, #0x0000000f		@ revision
+	orr	r0, r6, r5, lsr #20-4		@ combine variant and revision
+
 #ifdef CONFIG_ARM_ERRATA_430973
-	mrc	p15, 0, r10, c1, c0, 1		@ read aux control register
-	orr	r10, r10, #(1 << 6)		@ set IBE to 1
-	mcr	p15, 0, r10, c1, c0, 1		@ write aux control register
+	teq	r5, #0x00100000			@ only present in r1p*
+	mrceq	p15, 0, r10, c1, c0, 1		@ read aux control register
+	orreq	r10, r10, #(1 << 6)		@ set IBE to 1
+	mcreq	p15, 0, r10, c1, c0, 1		@ write aux control register
 #endif
 #ifdef CONFIG_ARM_ERRATA_458693
-	mrc	p15, 0, r10, c1, c0, 1		@ read aux control register
-	orr	r10, r10, #(1 << 5)		@ set L1NEON to 1
-	orr	r10, r10, #(1 << 9)		@ set PLDNOP to 1
-	mcr	p15, 0, r10, c1, c0, 1		@ write aux control register
+	teq	r0, #0x20			@ only present in r2p0
+	mrceq	p15, 0, r10, c1, c0, 1		@ read aux control register
+	orreq	r10, r10, #(1 << 5)		@ set L1NEON to 1
+	orreq	r10, r10, #(1 << 9)		@ set PLDNOP to 1
+	mcreq	p15, 0, r10, c1, c0, 1		@ write aux control register
 #endif
 #ifdef CONFIG_ARM_ERRATA_460075
-	mrc	p15, 1, r10, c9, c0, 2		@ read L2 cache aux ctrl register
-	orr	r10, r10, #(1 << 22)		@ set the Write Allocate disable bit
-	mcr	p15, 1, r10, c9, c0, 2		@ write the L2 cache aux ctrl register
+	teq	r0, #0x20			@ only present in r2p0
+	mrceq	p15, 1, r10, c9, c0, 2		@ read L2 cache aux ctrl register
+	tsteq	r10, #1 << 22
+	orreq	r10, r10, #(1 << 22)		@ set the Write Allocate disable bit
+	mcreq	p15, 1, r10, c9, c0, 2		@ write the L2 cache aux ctrl register
 #endif
-	mov	r10, #0
+
+2:	mov	r10, #0
 #ifdef HARVARD_CACHE
 	mcr	p15, 0, r10, c7, c5, 0		@ I+BTB cache invalidate
 #endif

drivers/serial/imx.c

@@ -1031,6 +1031,8 @@ imx_console_setup(struct console *co, char *options)
 	if (co->index == -1 || co->index >= ARRAY_SIZE(imx_ports))
 		co->index = 0;
 	sport = imx_ports[co->index];
+	if(sport == NULL)
+		return -ENODEV;
 
 	if (options)
 		uart_parse_options(options, &baud, &parity, &bits, &flow);

include/linux/amba/serial.h

@@ -159,6 +159,7 @@
 #define UART01x_FR_MODEM_ANY	(UART01x_FR_DCD|UART01x_FR_DSR|UART01x_FR_CTS)
 
 #ifndef __ASSEMBLY__
+struct amba_device; /* in uncompress this is included but amba/bus.h is not */
 struct amba_pl010_data {
 	void (*set_mctrl)(struct amba_device *dev, void __iomem *base, unsigned int mctrl);
 };