Commit 60d79ab3 authored by David S. Miller's avatar David S. Miller

Merge branch 'net-dsa-b53-and-bcm_sf2-updates-for-7278'

Florian Fainelli says:

====================
net: dsa: b53 & bcm_sf2 updates for 7278

This patch series contains some updates to the b53 and bcm_sf2 drivers
specifically for the 7278 Ethernet switch.

The first patch is technically a bug fix so it should ideally be
backported to -stable, provided that Dan also agress with my resolution
on this.

Patches #2 through #4 are minor changes to the core b53 driver to
restore VLAN configuration upon system resumption as well as deny
specific bridge/VLAN operations on port 7 with the 7278 which is special
and does not support VLANs.

Patches #5 through #9 add support for matching VLAN TCI keys/masks to
the CFP code.

Changes in v2:

- fixed some code comments and arrange some code for easier reading
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parents ed52f2c6 8b3abe30
......@@ -681,7 +681,9 @@ int b53_configure_vlan(struct dsa_switch *ds)
{
struct b53_device *dev = ds->priv;
struct b53_vlan vl = { 0 };
struct b53_vlan *v;
int i, def_vid;
u16 vid;
def_vid = b53_default_pvid(dev);
......@@ -699,6 +701,19 @@ int b53_configure_vlan(struct dsa_switch *ds)
b53_write16(dev, B53_VLAN_PAGE,
B53_VLAN_PORT_DEF_TAG(i), def_vid);
/* Upon initial call we have not set-up any VLANs, but upon
* system resume, we need to restore all VLAN entries.
*/
for (vid = def_vid; vid < dev->num_vlans; vid++) {
v = &dev->vlans[vid];
if (!v->members)
continue;
b53_set_vlan_entry(dev, vid, v);
b53_fast_age_vlan(dev, vid);
}
return 0;
}
EXPORT_SYMBOL(b53_configure_vlan);
......@@ -1340,6 +1355,14 @@ int b53_vlan_prepare(struct dsa_switch *ds, int port,
if ((is5325(dev) || is5365(dev)) && vlan->vid_begin == 0)
return -EOPNOTSUPP;
/* Port 7 on 7278 connects to the ASP's UniMAC which is not capable of
* receiving VLAN tagged frames at all, we can still allow the port to
* be configured for egress untagged.
*/
if (dev->chip_id == BCM7278_DEVICE_ID && port == 7 &&
!(vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED))
return -EINVAL;
if (vlan->vid_end > dev->num_vlans)
return -ERANGE;
......@@ -1705,6 +1728,12 @@ int b53_br_join(struct dsa_switch *ds, int port, struct net_device *br)
u16 pvlan, reg;
unsigned int i;
/* On 7278, port 7 which connects to the ASP should only receive
* traffic from matching CFP rules.
*/
if (dev->chip_id == BCM7278_DEVICE_ID && port == 7)
return -EINVAL;
/* Make this port leave the all VLANs join since we will have proper
* VLAN entries from now on
*/
......
......@@ -178,9 +178,17 @@ static int bcm_sf2_port_setup(struct dsa_switch *ds, int port,
core_writel(priv, reg, CORE_DIS_LEARN);
/* Enable Broadcom tags for that port if requested */
if (priv->brcm_tag_mask & BIT(port))
if (priv->brcm_tag_mask & BIT(port)) {
b53_brcm_hdr_setup(ds, port);
/* Disable learning on ASP port */
if (port == 7) {
reg = core_readl(priv, CORE_DIS_LEARN);
reg |= BIT(port);
core_writel(priv, reg, CORE_DIS_LEARN);
}
}
/* Configure Traffic Class to QoS mapping, allow each priority to map
* to a different queue number
*/
......
......@@ -13,6 +13,8 @@
#include <net/dsa.h>
#include <linux/bitmap.h>
#include <net/flow_offload.h>
#include <net/switchdev.h>
#include <uapi/linux/if_bridge.h>
#include "bcm_sf2.h"
#include "bcm_sf2_regs.h"
......@@ -261,16 +263,27 @@ static int bcm_sf2_cfp_act_pol_set(struct bcm_sf2_priv *priv,
static void bcm_sf2_cfp_slice_ipv4(struct bcm_sf2_priv *priv,
struct flow_dissector_key_ipv4_addrs *addrs,
struct flow_dissector_key_ports *ports,
unsigned int slice_num,
const __be16 vlan_tci,
unsigned int slice_num, u8 num_udf,
bool mask)
{
u32 reg, offset;
/* UDF_Valid[7:0] [31:24]
* S-Tag [23:8]
* C-Tag [7:0]
*/
reg = udf_lower_bits(num_udf) << 24 | be16_to_cpu(vlan_tci) >> 8;
if (mask)
core_writel(priv, reg, CORE_CFP_MASK_PORT(5));
else
core_writel(priv, reg, CORE_CFP_DATA_PORT(5));
/* C-Tag [31:24]
* UDF_n_A8 [23:8]
* UDF_n_A7 [7:0]
*/
reg = 0;
reg = (u32)(be16_to_cpu(vlan_tci) & 0xff) << 24;
if (mask)
offset = CORE_CFP_MASK_PORT(4);
else
......@@ -336,6 +349,7 @@ static int bcm_sf2_cfp_ipv4_rule_set(struct bcm_sf2_priv *priv, int port,
struct ethtool_rx_flow_spec *fs)
{
struct ethtool_rx_flow_spec_input input = {};
__be16 vlan_tci = 0 , vlan_m_tci = 0xffff;
const struct cfp_udf_layout *layout;
unsigned int slice_num, rule_index;
struct ethtool_rx_flow_rule *flow;
......@@ -360,6 +374,12 @@ static int bcm_sf2_cfp_ipv4_rule_set(struct bcm_sf2_priv *priv, int port,
ip_frag = !!(be32_to_cpu(fs->h_ext.data[0]) & 1);
/* Extract VLAN TCI */
if (fs->flow_type & FLOW_EXT) {
vlan_tci = fs->h_ext.vlan_tci;
vlan_m_tci = fs->m_ext.vlan_tci;
}
/* Locate the first rule available */
if (fs->location == RX_CLS_LOC_ANY)
rule_index = find_first_zero_bit(priv->cfp.used,
......@@ -421,18 +441,11 @@ static int bcm_sf2_cfp_ipv4_rule_set(struct bcm_sf2_priv *priv, int port,
core_writel(priv, layout->udfs[slice_num].mask_value |
udf_upper_bits(num_udf), CORE_CFP_MASK_PORT(6));
/* UDF_Valid[7:0] [31:24]
* S-Tag [23:8]
* C-Tag [7:0]
*/
core_writel(priv, udf_lower_bits(num_udf) << 24, CORE_CFP_DATA_PORT(5));
/* Mask all but valid UDFs */
core_writel(priv, udf_lower_bits(num_udf) << 24, CORE_CFP_MASK_PORT(5));
/* Program the match and the mask */
bcm_sf2_cfp_slice_ipv4(priv, ipv4.key, ports.key, slice_num, false);
bcm_sf2_cfp_slice_ipv4(priv, ipv4.mask, ports.mask, SLICE_NUM_MASK, true);
bcm_sf2_cfp_slice_ipv4(priv, ipv4.key, ports.key, vlan_tci,
slice_num, num_udf, false);
bcm_sf2_cfp_slice_ipv4(priv, ipv4.mask, ports.mask, vlan_m_tci,
SLICE_NUM_MASK, num_udf, true);
/* Insert into TCAM now */
bcm_sf2_cfp_rule_addr_set(priv, rule_index);
......@@ -468,17 +481,29 @@ static int bcm_sf2_cfp_ipv4_rule_set(struct bcm_sf2_priv *priv, int port,
static void bcm_sf2_cfp_slice_ipv6(struct bcm_sf2_priv *priv,
const __be32 *ip6_addr, const __be16 port,
unsigned int slice_num,
const __be16 vlan_tci,
unsigned int slice_num, u32 udf_bits,
bool mask)
{
u32 reg, tmp, val, offset;
/* UDF_Valid[7:0] [31:24]
* S-Tag [23:8]
* C-Tag [7:0]
*/
reg = udf_bits << 24 | be16_to_cpu(vlan_tci) >> 8;
if (mask)
core_writel(priv, reg, CORE_CFP_MASK_PORT(5));
else
core_writel(priv, reg, CORE_CFP_DATA_PORT(5));
/* C-Tag [31:24]
* UDF_n_B8 [23:8] (port)
* UDF_n_B7 (upper) [7:0] (addr[15:8])
*/
reg = be32_to_cpu(ip6_addr[3]);
val = (u32)be16_to_cpu(port) << 8 | ((reg >> 8) & 0xff);
val |= (u32)(be16_to_cpu(vlan_tci) & 0xff) << 24;
if (mask)
offset = CORE_CFP_MASK_PORT(4);
else
......@@ -587,6 +612,11 @@ static int bcm_sf2_cfp_rule_cmp(struct bcm_sf2_priv *priv, int port,
ret = memcmp(&rule->fs.h_u, &fs->h_u, fs_size);
ret |= memcmp(&rule->fs.m_u, &fs->m_u, fs_size);
/* Compare VLAN TCI values as well */
if (rule->fs.flow_type & FLOW_EXT) {
ret |= rule->fs.h_ext.vlan_tci != fs->h_ext.vlan_tci;
ret |= rule->fs.m_ext.vlan_tci != fs->m_ext.vlan_tci;
}
if (ret == 0)
break;
}
......@@ -600,6 +630,7 @@ static int bcm_sf2_cfp_ipv6_rule_set(struct bcm_sf2_priv *priv, int port,
struct ethtool_rx_flow_spec *fs)
{
struct ethtool_rx_flow_spec_input input = {};
__be16 vlan_tci = 0, vlan_m_tci = 0xffff;
unsigned int slice_num, rule_index[2];
const struct cfp_udf_layout *layout;
struct ethtool_rx_flow_rule *flow;
......@@ -623,6 +654,12 @@ static int bcm_sf2_cfp_ipv6_rule_set(struct bcm_sf2_priv *priv, int port,
ip_frag = !!(be32_to_cpu(fs->h_ext.data[0]) & 1);
/* Extract VLAN TCI */
if (fs->flow_type & FLOW_EXT) {
vlan_tci = fs->h_ext.vlan_tci;
vlan_m_tci = fs->m_ext.vlan_tci;
}
layout = &udf_tcpip6_layout;
slice_num = bcm_sf2_get_slice_number(layout, 0);
if (slice_num == UDF_NUM_SLICES)
......@@ -704,20 +741,13 @@ static int bcm_sf2_cfp_ipv6_rule_set(struct bcm_sf2_priv *priv, int port,
reg = layout->udfs[slice_num].mask_value | udf_upper_bits(num_udf);
core_writel(priv, reg, CORE_CFP_MASK_PORT(6));
/* UDF_Valid[7:0] [31:24]
* S-Tag [23:8]
* C-Tag [7:0]
*/
core_writel(priv, udf_lower_bits(num_udf) << 24, CORE_CFP_DATA_PORT(5));
/* Mask all but valid UDFs */
core_writel(priv, udf_lower_bits(num_udf) << 24, CORE_CFP_MASK_PORT(5));
/* Slice the IPv6 source address and port */
bcm_sf2_cfp_slice_ipv6(priv, ipv6.key->src.in6_u.u6_addr32,
ports.key->src, slice_num, false);
ports.key->src, vlan_tci, slice_num,
udf_lower_bits(num_udf), false);
bcm_sf2_cfp_slice_ipv6(priv, ipv6.mask->src.in6_u.u6_addr32,
ports.mask->src, SLICE_NUM_MASK, true);
ports.mask->src, vlan_m_tci, SLICE_NUM_MASK,
udf_lower_bits(num_udf), true);
/* Insert into TCAM now because we need to insert a second rule */
bcm_sf2_cfp_rule_addr_set(priv, rule_index[0]);
......@@ -768,16 +798,12 @@ static int bcm_sf2_cfp_ipv6_rule_set(struct bcm_sf2_priv *priv, int port,
udf_lower_bits(num_udf) << 8;
core_writel(priv, reg, CORE_CFP_MASK_PORT(6));
/* Don't care */
core_writel(priv, 0, CORE_CFP_DATA_PORT(5));
/* Mask all */
core_writel(priv, 0, CORE_CFP_MASK_PORT(5));
bcm_sf2_cfp_slice_ipv6(priv, ipv6.key->dst.in6_u.u6_addr32,
ports.key->dst, slice_num, false);
ports.key->dst, 0, slice_num,
0, false);
bcm_sf2_cfp_slice_ipv6(priv, ipv6.mask->dst.in6_u.u6_addr32,
ports.key->dst, SLICE_NUM_MASK, true);
ports.key->dst, 0, SLICE_NUM_MASK,
0, true);
/* Insert into TCAM now */
bcm_sf2_cfp_rule_addr_set(priv, rule_index[1]);
......@@ -823,7 +849,9 @@ static int bcm_sf2_cfp_rule_insert(struct dsa_switch *ds, int port,
struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
s8 cpu_port = dsa_to_port(ds, port)->cpu_dp->index;
__u64 ring_cookie = fs->ring_cookie;
struct switchdev_obj_port_vlan vlan;
unsigned int queue_num, port_num;
u16 vid;
int ret;
/* This rule is a Wake-on-LAN filter and we must specifically
......@@ -843,6 +871,34 @@ static int bcm_sf2_cfp_rule_insert(struct dsa_switch *ds, int port,
dsa_is_cpu_port(ds, port_num)) ||
port_num >= priv->hw_params.num_ports)
return -EINVAL;
/* If the rule is matching a particular VLAN, make sure that we honor
* the matching and have it tagged or untagged on the destination port,
* we do this on egress with a VLAN entry. The egress tagging attribute
* is expected to be provided in h_ext.data[1] bit 0. A 1 means untagged,
* a 0 means tagged.
*/
if (fs->flow_type & FLOW_EXT) {
/* We cannot support matching multiple VLAN IDs yet */
if ((be16_to_cpu(fs->m_ext.vlan_tci) & VLAN_VID_MASK) !=
VLAN_VID_MASK)
return -EINVAL;
vid = be16_to_cpu(fs->h_ext.vlan_tci) & VLAN_VID_MASK;
vlan.vid_begin = vid;
vlan.vid_end = vid;
if (cpu_to_be32(fs->h_ext.data[1]) & 1)
vlan.flags = BRIDGE_VLAN_INFO_UNTAGGED;
else
vlan.flags = 0;
ret = ds->ops->port_vlan_prepare(ds, port_num, &vlan);
if (ret)
return ret;
ds->ops->port_vlan_add(ds, port_num, &vlan);
}
/*
* We have a small oddity where Port 6 just does not have a
* valid bit here (so we substract by one).
......@@ -878,21 +934,22 @@ static int bcm_sf2_cfp_rule_set(struct dsa_switch *ds, int port,
int ret = -EINVAL;
/* Check for unsupported extensions */
if ((fs->flow_type & FLOW_EXT) && (fs->m_ext.vlan_etype ||
fs->m_ext.data[1]))
if (fs->flow_type & FLOW_MAC_EXT)
return -EINVAL;
if (fs->location != RX_CLS_LOC_ANY && fs->location >= CFP_NUM_RULES)
if (fs->location != RX_CLS_LOC_ANY &&
fs->location > bcm_sf2_cfp_rule_size(priv))
return -EINVAL;
if ((fs->flow_type & FLOW_EXT) &&
!(ds->ops->port_vlan_prepare || ds->ops->port_vlan_add ||
ds->ops->port_vlan_del))
return -EOPNOTSUPP;
if (fs->location != RX_CLS_LOC_ANY &&
test_bit(fs->location, priv->cfp.used))
return -EBUSY;
if (fs->location != RX_CLS_LOC_ANY &&
fs->location > bcm_sf2_cfp_rule_size(priv))
return -EINVAL;
ret = bcm_sf2_cfp_rule_cmp(priv, port, fs);
if (ret == 0)
return -EEXIST;
......@@ -973,7 +1030,7 @@ static int bcm_sf2_cfp_rule_del(struct bcm_sf2_priv *priv, int port, u32 loc)
struct cfp_rule *rule;
int ret;
if (loc >= CFP_NUM_RULES)
if (loc > bcm_sf2_cfp_rule_size(priv))
return -EINVAL;
/* Refuse deleting unused rules, and those that are not unique since
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment