brcmfmac: support critical protocol API for DHCP

Adds support for the critical protocol API provided by nl80211
which gives Wifi traffic priority over a Bluetooth (e)SCO connection
and disables scanning during DCHP negotiation.
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Piotr Haber <phaber@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

drivers/net/wireless/brcm80211/brcmfmac/Makefile

@@ -30,7 +30,8 @@ brcmfmac-objs += \
 		p2p.o \
 		dhd_cdc.o \
 		dhd_common.o \
-		dhd_linux.o
+		dhd_linux.o \
+		btcoex.o
 brcmfmac-$(CONFIG_BRCMFMAC_SDIO) += \
 		dhd_sdio.o \
 		bcmsdh.o \

drivers/net/wireless/brcm80211/brcmfmac/btcoex.h

+/*
+ * Copyright (c) 2013 Broadcom Corporation
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
+ * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
+ * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
+ * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+#ifndef WL_BTCOEX_H_
+#define WL_BTCOEX_H_
+
+enum brcmf_btcoex_mode {
+	BRCMF_BTCOEX_DISABLED,
+	BRCMF_BTCOEX_ENABLED
+};
+
+int brcmf_btcoex_attach(struct brcmf_cfg80211_info *cfg);
+void brcmf_btcoex_detach(struct brcmf_cfg80211_info *cfg);
+int brcmf_btcoex_set_mode(struct brcmf_cfg80211_vif *vif,
+			  enum brcmf_btcoex_mode mode, u16 duration);
+
+#endif /* WL_BTCOEX_H_ */

drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c

@@ -29,6 +29,7 @@
 #include "tracepoint.h"
 #include "fwil_types.h"
 #include "p2p.h"
+#include "btcoex.h"
 #include "wl_cfg80211.h"
 #include "fwil.h"
 
@@ -1051,6 +1052,7 @@ static void brcmf_init_prof(struct brcmf_cfg80211_profile *prof)
 
 static void brcmf_link_down(struct brcmf_cfg80211_vif *vif)
 {
+	struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(vif->wdev.wiphy);
 	s32 err = 0;
 
 	brcmf_dbg(TRACE, "Enter\n");
@@ -1064,6 +1066,8 @@ static void brcmf_link_down(struct brcmf_cfg80211_vif *vif)
 		clear_bit(BRCMF_VIF_STATUS_CONNECTED, &vif->sme_state);
 	}
 	clear_bit(BRCMF_VIF_STATUS_CONNECTING, &vif->sme_state);
+	clear_bit(BRCMF_SCAN_STATUS_SUPPRESS, &cfg->scan_status);
+	brcmf_btcoex_set_mode(vif, BRCMF_BTCOEX_ENABLED, 0);
 	brcmf_dbg(TRACE, "Exit\n");
 }
 
@@ -4013,6 +4017,39 @@ brcmf_cfg80211_cancel_remain_on_channel(struct wiphy *wiphy,
 	return err;
 }
 
+static int brcmf_cfg80211_crit_proto_start(struct wiphy *wiphy,
+					   struct wireless_dev *wdev,
+					   enum nl80211_crit_proto_id proto,
+					   u16 duration)
+{
+	struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
+	struct brcmf_cfg80211_vif *vif;
+
+	vif = container_of(wdev, struct brcmf_cfg80211_vif, wdev);
+
+	/* only DHCP support for now */
+	if (proto != NL80211_CRIT_PROTO_DHCP)
+		return -EINVAL;
+
+	/* suppress and abort scanning */
+	set_bit(BRCMF_SCAN_STATUS_SUPPRESS, &cfg->scan_status);
+	brcmf_abort_scanning(cfg);
+
+	return brcmf_btcoex_set_mode(vif, BRCMF_BTCOEX_DISABLED, duration);
+}
+
+static void brcmf_cfg80211_crit_proto_stop(struct wiphy *wiphy,
+					   struct wireless_dev *wdev)
+{
+	struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
+	struct brcmf_cfg80211_vif *vif;
+
+	vif = container_of(wdev, struct brcmf_cfg80211_vif, wdev);
+
+	brcmf_btcoex_set_mode(vif, BRCMF_BTCOEX_ENABLED, 0);
+	clear_bit(BRCMF_SCAN_STATUS_SUPPRESS, &cfg->scan_status);
+}
+
 static struct cfg80211_ops wl_cfg80211_ops = {
 	.add_virtual_intf = brcmf_cfg80211_add_iface,
 	.del_virtual_intf = brcmf_cfg80211_del_iface,
@@ -4049,6 +4086,8 @@ static struct cfg80211_ops wl_cfg80211_ops = {
 	.cancel_remain_on_channel = brcmf_cfg80211_cancel_remain_on_channel,
 	.start_p2p_device = brcmf_p2p_start_device,
 	.stop_p2p_device = brcmf_p2p_stop_device,
+	.crit_proto_start = brcmf_cfg80211_crit_proto_start,
+	.crit_proto_stop = brcmf_cfg80211_crit_proto_stop,
 #ifdef CONFIG_NL80211_TESTMODE
 	.testmode_cmd = brcmf_cfg80211_testmode
 #endif
@@ -4786,6 +4825,12 @@ struct brcmf_cfg80211_info *brcmf_cfg80211_attach(struct brcmf_pub *drvr,
 		brcmf_err("P2P initilisation failed (%d)\n", err);
 		goto cfg80211_p2p_attach_out;
 	}
+	err = brcmf_btcoex_attach(cfg);
+	if (err) {
+		brcmf_err("BT-coex initialisation failed (%d)\n", err);
+		brcmf_p2p_detach(&cfg->p2p);
+		goto cfg80211_p2p_attach_out;
+	}
 
 	err = brcmf_fil_cmd_int_get(ifp, BRCMF_C_GET_VERSION,
 				    &io_type);
@@ -4813,6 +4858,7 @@ void brcmf_cfg80211_detach(struct brcmf_cfg80211_info *cfg)
 	struct brcmf_cfg80211_vif *tmp;
 
 	wl_deinit_priv(cfg);
+	brcmf_btcoex_detach(cfg);
 	list_for_each_entry_safe(vif, tmp, &cfg->vif_list, list) {
 		brcmf_free_vif(vif);
 	}

drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h

@@ -351,6 +351,7 @@ struct brcmf_cfg80211_vif_event {
  * @wiphy: wiphy object for cfg80211 interface.
  * @conf: dongle configuration.
  * @p2p: peer-to-peer specific information.
+ * @btcoex: Bluetooth coexistence information.
  * @scan_request: cfg80211 scan request object.
  * @usr_sync: mainly for dongle up/down synchronization.
  * @bss_list: bss_list holding scanned ap information.
@@ -384,6 +385,7 @@ struct brcmf_cfg80211_info {
 	struct wiphy *wiphy;
 	struct brcmf_cfg80211_conf *conf;
 	struct brcmf_p2p_info p2p;
+	struct brcmf_btcoex_info *btcoex;
 	struct cfg80211_scan_request *scan_request;
 	struct mutex usr_sync;
 	struct brcmf_scan_results *bss_list;