regulator: Convert max8997 to set_voltage_time_sel

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

drivers/regulator/max8997.c

@@ -489,9 +489,7 @@ static int max8997_set_voltage_ldobuck(struct regulator_dev *rdev,
 	int min_vol = min_uV / 1000, max_vol = max_uV / 1000;
 	const struct voltage_map_desc *desc;
 	int rid = rdev_get_id(rdev);
-	int reg, shift = 0, mask, ret;
-	int i;
-	u8 org;
+	int i, reg, shift, mask, ret;
 
 	switch (rid) {
 	case MAX8997_LDO1 ... MAX8997_LDO21:
@@ -520,21 +518,50 @@ static int max8997_set_voltage_ldobuck(struct regulator_dev *rdev,
 	if (ret)
 		return ret;
 
-	max8997_read_reg(i2c, reg, &org);
-	org = (org & mask) >> shift;
-
 	ret = max8997_update_reg(i2c, reg, i << shift, mask << shift);
 	*selector = i;
 
-	if (rid == MAX8997_BUCK1 || rid == MAX8997_BUCK2 ||
-			rid == MAX8997_BUCK4 || rid == MAX8997_BUCK5) {
-		/* If the voltage is increasing */
-		if (org < i)
-			udelay(DIV_ROUND_UP(desc->step * (i - org),
-						max8997->ramp_delay));
+	return ret;
+}
+
+static int max8997_set_voltage_ldobuck_time_sel(struct regulator_dev *rdev,
+						unsigned int old_selector,
+						unsigned int new_selector)
+{
+	struct max8997_data *max8997 = rdev_get_drvdata(rdev);
+	int rid = rdev_get_id(rdev);
+	const struct voltage_map_desc *desc = reg_voltage_map[rid];
+
+	/* Delay is required only if the voltage is increasing */
+	if (old_selector >= new_selector)
+		return 0;
+
+	/* No need to delay if gpio_dvs_mode */
+	switch (rid) {
+	case MAX8997_BUCK1:
+		if (max8997->buck1_gpiodvs)
+			return 0;
+		break;
+	case MAX8997_BUCK2:
+		if (max8997->buck2_gpiodvs)
+			return 0;
+		break;
+	case MAX8997_BUCK5:
+		if (max8997->buck5_gpiodvs)
+			return 0;
+		break;
+	}
+
+	switch (rid) {
+	case MAX8997_BUCK1:
+	case MAX8997_BUCK2:
+	case MAX8997_BUCK4:
+	case MAX8997_BUCK5:
+		return DIV_ROUND_UP(desc->step * (new_selector - old_selector),
+				    max8997->ramp_delay);
 	}
 
-	return ret;
+	return 0;
 }
 
 /*
@@ -780,6 +807,7 @@ static struct regulator_ops max8997_ldo_ops = {
 	.disable		= max8997_reg_disable,
 	.get_voltage_sel	= max8997_get_voltage_sel,
 	.set_voltage		= max8997_set_voltage_ldobuck,
+	.set_voltage_time_sel	= max8997_set_voltage_ldobuck_time_sel,
 	.set_suspend_enable	= max8997_reg_enable_suspend,
 	.set_suspend_disable	= max8997_reg_disable_suspend,
 };
@@ -791,6 +819,7 @@ static struct regulator_ops max8997_buck_ops = {
 	.disable		= max8997_reg_disable,
 	.get_voltage_sel	= max8997_get_voltage_sel,
 	.set_voltage		= max8997_set_voltage_buck,
+	.set_voltage_time_sel	= max8997_set_voltage_ldobuck_time_sel,
 	.set_suspend_enable	= max8997_reg_enable_suspend,
 	.set_suspend_disable	= max8997_reg_disable_suspend,
 };