Merge branch 'cpsw-fixed-phy-dt-bugs'

David Rivshin says:

====================
drivers: net: cpsw: Fix bugs in fixed-link PHY DT parsing

Commit 1f71e8c9 ("drivers: net: cpsw:
Add support for fixed-link PHY") added initial fixed-link PHY support
for CPSW, but missed a few considerations.

This series is based on the tip of the net tree. The first two patches
fix user-visible errors in different hardware configurations. The third
patch is for an internal reference counting issue. They are logically
independent changes, but in the same function, so must be applied in
order to apply cleanly.

The first patch was originally submitted by Pascal Speck on December 4,
but was not picked up by patchwork. I suspect that is because the patch
was mangled by the mailer. I fixed the mangling and am including it in
this series, as I believe it is the correct change.

I have tested on the following hardware configurations:
 - (EVMSK) dual emac with two real MDIO-connected phys using RGMII-TXID
 - single emac with fixed-link using RGMII
Testing of other CPSW emac configurations that folks may have would
be appreciated.

Changes from v1 [1]:
 - Split into 3 smaller patches.
 - Maintain 1f71e8c9's preference for fixed-link over phy_id if
   they are both (incorrectly) specified in the slave node.
 - Update binding documentation to no longer say that phy_mode is also
   mutually exclusive with fixed-link.
 - Dropped unnecessary include of phy_fixed.h.

[1] https://patchwork.ozlabs.org/patch/554989/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Documentation/devicetree/bindings/net/cpsw.txt

@@ -40,18 +40,18 @@ Optional properties:
 
 Slave Properties:
 Required properties:
-- phy_id		: Specifies slave phy id
 - phy-mode		: See ethernet.txt file in the same directory
 
 Optional properties:
 - dual_emac_res_vlan	: Specifies VID to be used to segregate the ports
 - mac-address		: See ethernet.txt file in the same directory
+- phy_id		: Specifies slave phy id
 - phy-handle		: See ethernet.txt file in the same directory
 
 Slave sub-nodes:
 - fixed-link		: See fixed-link.txt file in the same directory
-			  Either the properties phy_id and phy-mode,
-			  or the sub-node fixed-link can be specified
+			  Either the property phy_id, or the sub-node
+			  fixed-link can be specified
 
 Note: "ti,hwmods" field is used to fetch the base address and irq
 resources from TI, omap hwmod data base during device registration.

drivers/net/ethernet/ti/cpsw.c

@@ -2026,45 +2026,54 @@ static int cpsw_probe_dt(struct cpsw_priv *priv,
 	for_each_child_of_node(node, slave_node) {
 		struct cpsw_slave_data *slave_data = data->slave_data + i;
 		const void *mac_addr = NULL;
-		u32 phyid;
 		int lenp;
 		const __be32 *parp;
-		struct device_node *mdio_node;
-		struct platform_device *mdio;
 
 		/* This is no slave child node, continue */
 		if (strcmp(slave_node->name, "slave"))
 			continue;
 
 		priv->phy_node = of_parse_phandle(slave_node, "phy-handle", 0);
+		parp = of_get_property(slave_node, "phy_id", &lenp);
 		if (of_phy_is_fixed_link(slave_node)) {
-			struct phy_device *pd;
+			struct device_node *phy_node;
+			struct phy_device *phy_dev;
 
+			/* In the case of a fixed PHY, the DT node associated
+			 * to the PHY is the Ethernet MAC DT node.
+			 */
 			ret = of_phy_register_fixed_link(slave_node);
 			if (ret)
 				return ret;
-			pd = of_phy_find_device(slave_node);
-			if (!pd)
+			phy_node = of_node_get(slave_node);
+			phy_dev = of_phy_find_device(phy_node);
+			if (!phy_dev)
 				return -ENODEV;
 			snprintf(slave_data->phy_id, sizeof(slave_data->phy_id),
-				 PHY_ID_FMT, pd->bus->id, pd->phy_id);
-			goto no_phy_slave;
-		}
-		parp = of_get_property(slave_node, "phy_id", &lenp);
-		if ((parp == NULL) || (lenp != (sizeof(void *) * 2))) {
-			dev_err(&pdev->dev, "Missing slave[%d] phy_id property\n", i);
+				 PHY_ID_FMT, phy_dev->bus->id, phy_dev->addr);
+		} else if (parp) {
+			u32 phyid;
+			struct device_node *mdio_node;
+			struct platform_device *mdio;
+
+			if (lenp != (sizeof(__be32) * 2)) {
+				dev_err(&pdev->dev, "Invalid slave[%d] phy_id property\n", i);
+				goto no_phy_slave;
+			}
+			mdio_node = of_find_node_by_phandle(be32_to_cpup(parp));
+			phyid = be32_to_cpup(parp+1);
+			mdio = of_find_device_by_node(mdio_node);
+			of_node_put(mdio_node);
+			if (!mdio) {
+				dev_err(&pdev->dev, "Missing mdio platform device\n");
+				return -EINVAL;
+			}
+			snprintf(slave_data->phy_id, sizeof(slave_data->phy_id),
+				 PHY_ID_FMT, mdio->name, phyid);
+		} else {
+			dev_err(&pdev->dev, "No slave[%d] phy_id or fixed-link property\n", i);
 			goto no_phy_slave;
 		}
-		mdio_node = of_find_node_by_phandle(be32_to_cpup(parp));
-		phyid = be32_to_cpup(parp+1);
-		mdio = of_find_device_by_node(mdio_node);
-		of_node_put(mdio_node);
-		if (!mdio) {
-			dev_err(&pdev->dev, "Missing mdio platform device\n");
-			return -EINVAL;
-		}
-		snprintf(slave_data->phy_id, sizeof(slave_data->phy_id),
-			 PHY_ID_FMT, mdio->name, phyid);
 		slave_data->phy_if = of_get_phy_mode(slave_node);
 		if (slave_data->phy_if < 0) {
 			dev_err(&pdev->dev, "Missing or malformed slave[%d] phy-mode property\n",