mfd: Add s5m regulator operation mode

This patch add variables for opmode of s5m series.
S5M series have 4 operation modes.
Off mode is always regulator off mode.
On mode is always regulator on mode.
Lowpower mode is that regualtor operate in low-power.
Suspend mode is that regulator operation depends on AP suspend mode.
Signed-off-by: Sangbeom Kim <sbkim73@samsung.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

include/linux/mfd/s5m87xx/s5m-core.h

@@ -335,6 +335,7 @@ extern int s5m_reg_update(struct s5m87xx_dev *s5m87xx, u8 reg, u8 val, u8 mask);
 
 struct s5m_platform_data {
 	struct s5m_regulator_data	*regulators;
+	struct s5m_opmode_data		*opmode;
 	int				device_type;
 	int				num_regulators;
 

include/linux/mfd/s5m87xx/s5m-pmic.h

@@ -58,6 +58,8 @@ enum s5m8767_regulators {
 	S5M8767_REG_MAX,
 };
 
+#define S5M8767_ENCTRL_SHIFT  6
+
 /* S5M8763 regulator ids */
 enum s5m8763_regulators {
 	S5M8763_LDO1,
@@ -97,4 +99,31 @@ struct s5m_regulator_data {
 	struct regulator_init_data	*initdata;
 };
 
+/*
+ * s5m_opmode_data - regulator operation mode data
+ * @id: regulator id
+ * @mode: regulator operation mode
+ */
+struct s5m_opmode_data {
+	int id;
+	int mode;
+};
+
+/*
+ * s5m regulator operation mode
+ * S5M_OPMODE_OFF	Regulator always OFF
+ * S5M_OPMODE_ON	Regulator always ON
+ * S5M_OPMODE_LOWPOWER  Regulator is on in low-power mode
+ * S5M_OPMODE_SUSPEND   Regulator is changed by PWREN pin
+ *			If PWREN is high, regulator is on
+ *			If PWREN is low, regulator is off
+ */
+
+enum s5m_opmode {
+	S5M_OPMODE_OFF,
+	S5M_OPMODE_ON,
+	S5M_OPMODE_LOWPOWER,
+	S5M_OPMODE_SUSPEND,
+};
+
 #endif /*  __LINUX_MFD_S5M_PMIC_H */