ARM: bitops: switch set/clear/change bitops to use ldrex/strex

Switch the set/clear/change bitops to use the word-based exclusive
operations, which are only present in a wider range of ARM architectures
than the byte-based exclusive operations.

Tested record:
- Nicolas Pitre: ext3,rw,le
- Sourav Poddar: nfs,le
- Will Deacon: ext3,rw,le
- Tony Lindgren: ext3+nfs,le
Reviewed-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Tested-by: Sourav Poddar <sourav.poddar@ti.com>
Tested-by: Will Deacon <will.deacon@arm.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

arch/arm/include/asm/bitops.h

@@ -148,15 +148,19 @@ ____atomic_test_and_change_bit(unsigned int bit, volatile unsigned long *p)
  * Note that bit 0 is defined to be 32-bit word bit 0, not byte 0 bit 0.
  */
 
+/*
+ * Native endian assembly bitops.  nr = 0 -> word 0 bit 0.
+ */
+extern void _set_bit(int nr, volatile unsigned long * p);
+extern void _clear_bit(int nr, volatile unsigned long * p);
+extern void _change_bit(int nr, volatile unsigned long * p);
+extern int _test_and_set_bit(int nr, volatile unsigned long * p);
+extern int _test_and_clear_bit(int nr, volatile unsigned long * p);
+extern int _test_and_change_bit(int nr, volatile unsigned long * p);
+
 /*
  * Little endian assembly bitops.  nr = 0 -> byte 0 bit 0.
  */
-extern void _set_bit_le(int nr, volatile unsigned long * p);
-extern void _clear_bit_le(int nr, volatile unsigned long * p);
-extern void _change_bit_le(int nr, volatile unsigned long * p);
-extern int _test_and_set_bit_le(int nr, volatile unsigned long * p);
-extern int _test_and_clear_bit_le(int nr, volatile unsigned long * p);
-extern int _test_and_change_bit_le(int nr, volatile unsigned long * p);
 extern int _find_first_zero_bit_le(const void * p, unsigned size);
 extern int _find_next_zero_bit_le(const void * p, int size, int offset);
 extern int _find_first_bit_le(const unsigned long *p, unsigned size);
@@ -165,12 +169,6 @@ extern int _find_next_bit_le(const unsigned long *p, int size, int offset);
 /*
  * Big endian assembly bitops.  nr = 0 -> byte 3 bit 0.
  */
-extern void _set_bit_be(int nr, volatile unsigned long * p);
-extern void _clear_bit_be(int nr, volatile unsigned long * p);
-extern void _change_bit_be(int nr, volatile unsigned long * p);
-extern int _test_and_set_bit_be(int nr, volatile unsigned long * p);
-extern int _test_and_clear_bit_be(int nr, volatile unsigned long * p);
-extern int _test_and_change_bit_be(int nr, volatile unsigned long * p);
 extern int _find_first_zero_bit_be(const void * p, unsigned size);
 extern int _find_next_zero_bit_be(const void * p, int size, int offset);
 extern int _find_first_bit_be(const unsigned long *p, unsigned size);
@@ -180,33 +178,26 @@ extern int _find_next_bit_be(const unsigned long *p, int size, int offset);
 /*
  * The __* form of bitops are non-atomic and may be reordered.
  */
-#define	ATOMIC_BITOP_LE(name,nr,p)		\
-	(__builtin_constant_p(nr) ?		\
-	 ____atomic_##name(nr, p) :		\
-	 _##name##_le(nr,p))
-
-#define	ATOMIC_BITOP_BE(name,nr,p)		\
-	(__builtin_constant_p(nr) ?		\
-	 ____atomic_##name(nr, p) :		\
-	 _##name##_be(nr,p))
+#define ATOMIC_BITOP(name,nr,p)			\
+	(__builtin_constant_p(nr) ? ____atomic_##name(nr, p) : _##name(nr,p))
 #else
-#define ATOMIC_BITOP_LE(name,nr,p)	_##name##_le(nr,p)
-#define ATOMIC_BITOP_BE(name,nr,p)	_##name##_be(nr,p)
+#define ATOMIC_BITOP(name,nr,p)		_##name(nr,p)
 #endif
 
-#define NONATOMIC_BITOP(name,nr,p)		\
-	(____nonatomic_##name(nr, p))
+/*
+ * Native endian atomic definitions.
+ */
+#define set_bit(nr,p)			ATOMIC_BITOP(set_bit,nr,p)
+#define clear_bit(nr,p)			ATOMIC_BITOP(clear_bit,nr,p)
+#define change_bit(nr,p)		ATOMIC_BITOP(change_bit,nr,p)
+#define test_and_set_bit(nr,p)		ATOMIC_BITOP(test_and_set_bit,nr,p)
+#define test_and_clear_bit(nr,p)	ATOMIC_BITOP(test_and_clear_bit,nr,p)
+#define test_and_change_bit(nr,p)	ATOMIC_BITOP(test_and_change_bit,nr,p)
 
 #ifndef __ARMEB__
 /*
  * These are the little endian, atomic definitions.
  */
-#define set_bit(nr,p)			ATOMIC_BITOP_LE(set_bit,nr,p)
-#define clear_bit(nr,p)			ATOMIC_BITOP_LE(clear_bit,nr,p)
-#define change_bit(nr,p)		ATOMIC_BITOP_LE(change_bit,nr,p)
-#define test_and_set_bit(nr,p)		ATOMIC_BITOP_LE(test_and_set_bit,nr,p)
-#define test_and_clear_bit(nr,p)	ATOMIC_BITOP_LE(test_and_clear_bit,nr,p)
-#define test_and_change_bit(nr,p)	ATOMIC_BITOP_LE(test_and_change_bit,nr,p)
 #define find_first_zero_bit(p,sz)	_find_first_zero_bit_le(p,sz)
 #define find_next_zero_bit(p,sz,off)	_find_next_zero_bit_le(p,sz,off)
 #define find_first_bit(p,sz)		_find_first_bit_le(p,sz)
@@ -215,16 +206,9 @@ extern int _find_next_bit_be(const unsigned long *p, int size, int offset);
 #define WORD_BITOFF_TO_LE(x)		((x))
 
 #else
-
 /*
  * These are the big endian, atomic definitions.
  */
-#define set_bit(nr,p)			ATOMIC_BITOP_BE(set_bit,nr,p)
-#define clear_bit(nr,p)			ATOMIC_BITOP_BE(clear_bit,nr,p)
-#define change_bit(nr,p)		ATOMIC_BITOP_BE(change_bit,nr,p)
-#define test_and_set_bit(nr,p)		ATOMIC_BITOP_BE(test_and_set_bit,nr,p)
-#define test_and_clear_bit(nr,p)	ATOMIC_BITOP_BE(test_and_clear_bit,nr,p)
-#define test_and_change_bit(nr,p)	ATOMIC_BITOP_BE(test_and_change_bit,nr,p)
 #define find_first_zero_bit(p,sz)	_find_first_zero_bit_be(p,sz)
 #define find_next_zero_bit(p,sz,off)	_find_next_zero_bit_be(p,sz,off)
 #define find_first_bit(p,sz)		_find_first_bit_be(p,sz)

arch/arm/kernel/armksyms.c

@@ -140,24 +140,18 @@ EXPORT_SYMBOL(__aeabi_ulcmp);
 #endif
 
 	/* bitops */
-EXPORT_SYMBOL(_set_bit_le);
-EXPORT_SYMBOL(_test_and_set_bit_le);
-EXPORT_SYMBOL(_clear_bit_le);
-EXPORT_SYMBOL(_test_and_clear_bit_le);
-EXPORT_SYMBOL(_change_bit_le);
-EXPORT_SYMBOL(_test_and_change_bit_le);
+EXPORT_SYMBOL(_set_bit);
+EXPORT_SYMBOL(_test_and_set_bit);
+EXPORT_SYMBOL(_clear_bit);
+EXPORT_SYMBOL(_test_and_clear_bit);
+EXPORT_SYMBOL(_change_bit);
+EXPORT_SYMBOL(_test_and_change_bit);
 EXPORT_SYMBOL(_find_first_zero_bit_le);
 EXPORT_SYMBOL(_find_next_zero_bit_le);
 EXPORT_SYMBOL(_find_first_bit_le);
 EXPORT_SYMBOL(_find_next_bit_le);
 
 #ifdef __ARMEB__
-EXPORT_SYMBOL(_set_bit_be);
-EXPORT_SYMBOL(_test_and_set_bit_be);
-EXPORT_SYMBOL(_clear_bit_be);
-EXPORT_SYMBOL(_test_and_clear_bit_be);
-EXPORT_SYMBOL(_change_bit_be);
-EXPORT_SYMBOL(_test_and_change_bit_be);
 EXPORT_SYMBOL(_find_first_zero_bit_be);
 EXPORT_SYMBOL(_find_next_zero_bit_be);
 EXPORT_SYMBOL(_find_first_bit_be);

arch/arm/lib/bitops.h

-
-#if __LINUX_ARM_ARCH__ >= 6 && defined(CONFIG_CPU_32v6K)
+#if __LINUX_ARM_ARCH__ >= 6
 	.macro	bitop, instr
 	ands	ip, r1, #3
 	strneb	r1, [ip]		@ assert word-aligned
 	mov	r2, #1
-	and	r3, r0, #7		@ Get bit offset
-	add	r1, r1, r0, lsr #3	@ Get byte offset
+	and	r3, r0, #31		@ Get bit offset
+	mov	r0, r0, lsr #5
+	add	r1, r1, r0, lsl #2	@ Get word offset
 	mov	r3, r2, lsl r3
-1:	ldrexb	r2, [r1]
+1:	ldrex	r2, [r1]
 	\instr	r2, r2, r3
-	strexb	r0, r2, [r1]
+	strex	r0, r2, [r1]
 	cmp	r0, #0
 	bne	1b
 	mov	pc, lr
@@ -18,15 +18,16 @@
 	.macro	testop, instr, store
 	ands	ip, r1, #3
 	strneb	r1, [ip]		@ assert word-aligned
-	and	r3, r0, #7		@ Get bit offset
 	mov	r2, #1
-	add	r1, r1, r0, lsr #3	@ Get byte offset
+	and	r3, r0, #31		@ Get bit offset
+	mov	r0, r0, lsr #5
+	add	r1, r1, r0, lsl #2	@ Get word offset
 	mov	r3, r2, lsl r3		@ create mask
 	smp_dmb
-1:	ldrexb	r2, [r1]
+1:	ldrex	r2, [r1]
 	ands	r0, r2, r3		@ save old value of bit
-	\instr	r2, r2, r3			@ toggle bit
-	strexb	ip, r2, [r1]
+	\instr	r2, r2, r3		@ toggle bit
+	strex	ip, r2, [r1]
 	cmp	ip, #0
 	bne	1b
 	smp_dmb
@@ -38,13 +39,14 @@
 	.macro	bitop, instr
 	ands	ip, r1, #3
 	strneb	r1, [ip]		@ assert word-aligned
-	and	r2, r0, #7
+	and	r2, r0, #31
+	mov	r0, r0, lsr #5
 	mov	r3, #1
 	mov	r3, r3, lsl r2
 	save_and_disable_irqs ip
-	ldrb	r2, [r1, r0, lsr #3]
+	ldr	r2, [r1, r0, lsl #2]
 	\instr	r2, r2, r3
-	strb	r2, [r1, r0, lsr #3]
+	str	r2, [r1, r0, lsl #2]
 	restore_irqs ip
 	mov	pc, lr
 	.endm
@@ -60,11 +62,11 @@
 	.macro	testop, instr, store
 	ands	ip, r1, #3
 	strneb	r1, [ip]		@ assert word-aligned
-	add	r1, r1, r0, lsr #3
-	and	r3, r0, #7
-	mov	r0, #1
+	and	r3, r0, #31
+	mov	r0, r0, lsr #5
 	save_and_disable_irqs ip
-	ldrb	r2, [r1]
+	ldr	r2, [r1, r0, lsl #2]!
+	mov	r0, #1
 	tst	r2, r0, lsl r3
 	\instr	r2, r2, r0, lsl r3
 	\store	r2, [r1]

arch/arm/lib/changebit.S

@@ -12,12 +12,6 @@
 #include "bitops.h"
                 .text
 
-/* Purpose  : Function to change a bit
- * Prototype: int change_bit(int bit, void *addr)
- */
-ENTRY(_change_bit_be)
-		eor	r0, r0, #0x18		@ big endian byte ordering
-ENTRY(_change_bit_le)
+ENTRY(_change_bit)
 	bitop	eor
-ENDPROC(_change_bit_be)
-ENDPROC(_change_bit_le)
+ENDPROC(_change_bit)

arch/arm/lib/clearbit.S

@@ -12,13 +12,6 @@
 #include "bitops.h"
                 .text
 
-/*
- * Purpose  : Function to clear a bit
- * Prototype: int clear_bit(int bit, void *addr)
- */
-ENTRY(_clear_bit_be)
-		eor	r0, r0, #0x18		@ big endian byte ordering
-ENTRY(_clear_bit_le)
+ENTRY(_clear_bit)
 	bitop	bic
-ENDPROC(_clear_bit_be)
-ENDPROC(_clear_bit_le)
+ENDPROC(_clear_bit)

arch/arm/lib/setbit.S

@@ -12,13 +12,6 @@
 #include "bitops.h"
 		.text
 
-/*
- * Purpose  : Function to set a bit
- * Prototype: int set_bit(int bit, void *addr)
- */
-ENTRY(_set_bit_be)
-		eor	r0, r0, #0x18		@ big endian byte ordering
-ENTRY(_set_bit_le)
+ENTRY(_set_bit)
 	bitop	orr
-ENDPROC(_set_bit_be)
-ENDPROC(_set_bit_le)
+ENDPROC(_set_bit)

arch/arm/lib/testchangebit.S

@@ -12,9 +12,6 @@
 #include "bitops.h"
                 .text
 
-ENTRY(_test_and_change_bit_be)
-		eor	r0, r0, #0x18		@ big endian byte ordering
-ENTRY(_test_and_change_bit_le)
-	testop	eor, strb
-ENDPROC(_test_and_change_bit_be)
-ENDPROC(_test_and_change_bit_le)
+ENTRY(_test_and_change_bit)
+	testop	eor, str
+ENDPROC(_test_and_change_bit)

arch/arm/lib/testclearbit.S

@@ -12,9 +12,6 @@
 #include "bitops.h"
                 .text
 
-ENTRY(_test_and_clear_bit_be)
-		eor	r0, r0, #0x18		@ big endian byte ordering
-ENTRY(_test_and_clear_bit_le)
-	testop	bicne, strneb
-ENDPROC(_test_and_clear_bit_be)
-ENDPROC(_test_and_clear_bit_le)
+ENTRY(_test_and_clear_bit)
+	testop	bicne, strne
+ENDPROC(_test_and_clear_bit)

arch/arm/lib/testsetbit.S

@@ -12,9 +12,6 @@
 #include "bitops.h"
                 .text
 
-ENTRY(_test_and_set_bit_be)
-		eor	r0, r0, #0x18		@ big endian byte ordering
-ENTRY(_test_and_set_bit_le)
-	testop	orreq, streqb
-ENDPROC(_test_and_set_bit_be)
-ENDPROC(_test_and_set_bit_le)
+ENTRY(_test_and_set_bit)
+	testop	orreq, streq
+ENDPROC(_test_and_set_bit)