Merge tag 'late-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC late changes from Kevin Hilman:
 "These are changes that arrived a little late before the merge window,
  or had dependencies on previous branches.

  Highlights:
   - ux500: misc.  cleanup, fixup I2C devices
   - exynos: DT updates for RTC; PM updates
   - at91: DT updates for NAND; new platforms added to generic defconfig
   - sunxi: DT updates: cubieboard2, pinctrl driver, gated clocks
   - highbank: LPAE fixes, select necessary ARM errata
   - omap: PM fixes and improvements; OMAP5 mailbox support
   - omap: basic support for new DRA7xx SoCs"

* tag 'late-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (60 commits)
  ARM: dts: vexpress: Add CCI node to TC2 device-tree
  ARM: EXYNOS: Skip C1 cpuidle state for exynos5440
  ARM: EXYNOS: always enable PM domains support for EXYNOS4X12
  ARM: highbank: clean-up some unused includes
  ARM: sun7i: Enable the A20 clocks in the DTSI
  ARM: sun6i: Enable clock support in the DTSI
  ARM: sun5i: dt: Use the A10s gates in the DTSI
  ARM: at91: at91_dt_defconfig: enable rm9200 support
  ARM: dts: add ADC device tree node for exynos5420/5250
  ARM: dts: Add RTC DT node to Exynos5420 SoC
  ARM: dts: Update the "status" property of RTC DT node for Exynos5250 SoC
  ARM: dts: Fix the RTC DT node name for Exynos5250
  irqchip: mmp: avoid to include irqs head file
  ARM: mmp: avoid to include head file in mach-mmp
  irqchip: mmp: support irqchip
  irqchip: move mmp irq driver
  ARM: OMAP: AM33xx: clock: Add RNG clock data
  ARM: OMAP: TI81XX: add always-on powerdomain for TI81XX
  ARM: OMAP4: clock: Lock PLLs in the right sequence
  ARM: OMAP: AM33XX: hwmod: Add hwmod data for debugSS
  ...

arch/arm/Kconfig

@@ -557,6 +557,7 @@ config ARCH_MMP
 	select GENERIC_CLOCKEVENTS
 	select GPIO_PXA
 	select IRQ_DOMAIN
+	select MULTI_IRQ_HANDLER
 	select NEED_MACH_GPIO_H
 	select PINCTRL
 	select PLAT_PXA

arch/arm/boot/dts/Makefile

@@ -231,6 +231,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += \
 	sun5i-a10s-olinuxino-micro.dtb \
 	sun5i-a13-olinuxino.dtb \
 	sun6i-a31-colombus.dtb \
+	sun7i-a20-cubieboard2.dtb \
 	sun7i-a20-olinuxino-micro.dtb
 dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \
 	tegra20-iris-512.dtb \

arch/arm/boot/dts/exynos5.dtsi

@@ -95,7 +95,7 @@ serial@12C30000 {
 		interrupts = <0 54 0>;
 	};
 
-	rtc {
+	rtc@101E0000 {
 		compatible = "samsung,s3c6410-rtc";
 		reg = <0x101E0000 0x100>;
 		interrupts = <0 43 0>, <0 44 0>;

arch/arm/boot/dts/exynos5250-arndale.dts

@@ -538,10 +538,6 @@ timing0: timing@0 {
 		};
 	};
 
-	rtc {
-		status = "okay";
-	};
-
 	usb_hub_bus {
 		compatible = "simple-bus";
 		#address-cells = <1>;

arch/arm/boot/dts/exynos5250-snow.dts

@@ -171,10 +171,6 @@ keyboard-controller {
 		};
 	};
 
-	rtc {
-		status = "okay";
-	};
-
 	/*
 	 * On Snow we've got SIP WiFi and so can keep drive strengths low to
 	 * reduce EMI.

arch/arm/boot/dts/exynos5250.dtsi

@@ -180,9 +180,10 @@ codec@11000000 {
 		clock-names = "mfc";
 	};
 
-	rtc {
+	rtc@101E0000 {
 		clocks = <&clock 337>;
 		clock-names = "rtc";
+		status = "okay";
 	};
 
 	tmu@10060000 {
@@ -638,4 +639,15 @@ fimd@14400000 {
 		clocks = <&clock 133>, <&clock 339>;
 		clock-names = "sclk_fimd", "fimd";
 	};
+
+	adc: adc@12D10000 {
+		compatible = "samsung,exynos-adc-v1";
+		reg = <0x12D10000 0x100>, <0x10040718 0x4>;
+		interrupts = <0 106 0>;
+		clocks = <&clock 303>;
+		clock-names = "adc";
+		#io-channel-cells = <1>;
+		io-channel-ranges;
+		status = "disabled";
+	};
 };

arch/arm/boot/dts/exynos5420.dtsi

@@ -180,6 +180,12 @@ pinctrl_4: pinctrl@03860000 {
 		interrupts = <0 47 0>;
 	};
 
+	rtc@101E0000 {
+		clocks = <&clock 317>;
+		clock-names = "rtc";
+		status = "okay";
+	};
+
 	serial@12C00000 {
 		clocks = <&clock 257>, <&clock 128>;
 		clock-names = "uart", "clk_uart_baud0";
@@ -218,4 +224,15 @@ fimd@14400000 {
 		clocks = <&clock 147>, <&clock 421>;
 		clock-names = "sclk_fimd", "fimd";
 	};
+
+	adc: adc@12D10000 {
+		compatible = "samsung,exynos-adc-v2";
+		reg = <0x12D10000 0x100>, <0x10040720 0x4>;
+		interrupts = <0 106 0>;
+		clocks = <&clock 270>;
+		clock-names = "adc";
+		#io-channel-cells = <1>;
+		io-channel-ranges;
+		status = "disabled";
+	};
 };

arch/arm/boot/dts/sama5d3.dtsi

@@ -1034,21 +1034,30 @@ nand0: nand@60000000 {
 			compatible = "atmel,at91rm9200-nand";
 			#address-cells = <1>;
 			#size-cells = <1>;
+			ranges;
 			reg = <	0x60000000 0x01000000	/* EBI CS3 */
 				0xffffc070 0x00000490	/* SMC PMECC regs */
 				0xffffc500 0x00000100	/* SMC PMECC Error Location regs */
-				0x00100000 0x00100000	/* ROM code */
-				0x70000000 0x10000000	/* NFC Command Registers */
-				0xffffc000 0x00000070	/* NFC HSMC regs */
-				0x00200000 0x00100000	/* NFC SRAM banks */
+				0x00110000 0x00018000	/* ROM code */
 				>;
 			interrupts = <5 IRQ_TYPE_LEVEL_HIGH 6>;
 			atmel,nand-addr-offset = <21>;
 			atmel,nand-cmd-offset = <22>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_nand0_ale_cle>;
-			atmel,pmecc-lookup-table-offset = <0x10000 0x18000>;
+			atmel,pmecc-lookup-table-offset = <0x0 0x8000>;
 			status = "disabled";
+
+			nfc@70000000 {
+				compatible = "atmel,sama5d3-nfc";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <
+					0x70000000 0x10000000	/* NFC Command Registers */
+					0xffffc000 0x00000070	/* NFC HSMC regs */
+					0x00200000 0x00100000	/* NFC SRAM banks */
+					>;
+			};
 		};
 	};
 };

arch/arm/boot/dts/sama5d3xcm.dtsi

@@ -47,8 +47,6 @@ nand0: nand@60000000 {
 			atmel,has-pmecc;
 			atmel,pmecc-cap = <4>;
 			atmel,pmecc-sector-size = <512>;
-			atmel,has-nfc;
-			atmel,use-nfc-sram;
 			nand-on-flash-bbt;
 			status = "okay";
 

arch/arm/boot/dts/sun5i-a10s.dtsi

@@ -95,20 +95,16 @@ ahb: ahb@01c20054 {
 
 		ahb_gates: ahb_gates@01c20060 {
 			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-ahb-gates-clk";
+			compatible = "allwinner,sun5i-a10s-ahb-gates-clk";
 			reg = <0x01c20060 0x8>;
 			clocks = <&ahb>;
-			clock-output-names = "ahb_usb0", "ahb_ehci0",
-				"ahb_ohci0", "ahb_ehci1", "ahb_ohci1", "ahb_ss",
-				"ahb_dma", "ahb_bist", "ahb_mmc0", "ahb_mmc1",
-				"ahb_mmc2", "ahb_mmc3", "ahb_ms", "ahb_nand",
-				"ahb_sdram", "ahb_ace",	"ahb_emac", "ahb_ts",
-				"ahb_spi0", "ahb_spi1", "ahb_spi2", "ahb_spi3",
-				"ahb_pata", "ahb_sata", "ahb_gps", "ahb_ve",
-				"ahb_tvd", "ahb_tve0", "ahb_tve1", "ahb_lcd0",
-				"ahb_lcd1", "ahb_csi0", "ahb_csi1", "ahb_hdmi",
-				"ahb_de_be0", "ahb_de_be1", "ahb_de_fe0",
-				"ahb_de_fe1", "ahb_mp", "ahb_mali400";
+			clock-output-names = "ahb_usbotg", "ahb_ehci", "ahb_ohci",
+				"ahb_ss", "ahb_dma", "ahb_bist", "ahb_mmc0",
+				"ahb_mmc1", "ahb_mmc2", "ahb_nand", "ahb_sdram",
+				"ahb_emac", "ahb_ts", "ahb_spi0", "ahb_spi1",
+				"ahb_spi2", "ahb_gps", "ahb_stimer", "ahb_ve",
+				"ahb_tve", "ahb_lcd", "ahb_csi", "ahb_hdmi",
+				"ahb_de_be", "ahb_de_fe", "ahb_iep", "ahb_mali400";
 		};
 
 		apb0: apb0@01c20054 {
@@ -120,12 +116,11 @@ apb0: apb0@01c20054 {
 
 		apb0_gates: apb0_gates@01c20068 {
 			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-apb0-gates-clk";
+			compatible = "allwinner,sun5i-a10s-apb0-gates-clk";
 			reg = <0x01c20068 0x4>;
 			clocks = <&apb0>;
-			clock-output-names = "apb0_codec", "apb0_spdif",
-				"apb0_ac97", "apb0_iis", "apb0_pio", "apb0_ir0",
-				"apb0_ir1", "apb0_keypad";
+			clock-output-names = "apb0_codec", "apb0_iis", "apb0_pio",
+				"apb0_ir", "apb0_keypad";
 		};
 
 		/* dummy is pll62 */
@@ -145,15 +140,12 @@ apb1: apb1@01c20058 {
 
 		apb1_gates: apb1_gates@01c2006c {
 			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-apb1-gates-clk";
+			compatible = "allwinner,sun5i-a10s-apb1-gates-clk";
 			reg = <0x01c2006c 0x4>;
 			clocks = <&apb1>;
 			clock-output-names = "apb1_i2c0", "apb1_i2c1",
-				"apb1_i2c2", "apb1_can", "apb1_scr",
-				"apb1_ps20", "apb1_ps21", "apb1_uart0",
-				"apb1_uart1", "apb1_uart2", "apb1_uart3",
-				"apb1_uart4", "apb1_uart5", "apb1_uart6",
-				"apb1_uart7";
+				"apb1_i2c2", "apb1_uart0", "apb1_uart1",
+				"apb1_uart2", "apb1_uart3";
 		};
 	};
 

arch/arm/boot/dts/sun6i-a31-colombus.dts

@@ -24,6 +24,8 @@ chosen {
 
 	soc@01c00000 {
 		uart0: serial@01c28000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_pins_a>;
 			status = "okay";
 		};
 	};

arch/arm/boot/dts/sun6i-a31.dtsi

@@ -51,13 +51,137 @@ memory {
 
 	clocks {
 		#address-cells = <1>;
-		#size-cells = <0>;
+		#size-cells = <1>;
+		ranges;
 
-		osc: oscillator {
+		osc24M: osc24M {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
 			clock-frequency = <24000000>;
 		};
+
+		osc32k: osc32k {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+		};
+
+		pll1: pll1@01c20000 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun6i-a31-pll1-clk";
+			reg = <0x01c20000 0x4>;
+			clocks = <&osc24M>;
+		};
+
+		/*
+		 * This is a dummy clock, to be used as placeholder on
+		 * other mux clocks when a specific parent clock is not
+		 * yet implemented. It should be dropped when the driver
+		 * is complete.
+		 */
+		pll6: pll6 {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <0>;
+		};
+
+		cpu: cpu@01c20050 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-cpu-clk";
+			reg = <0x01c20050 0x4>;
+
+			/*
+			 * PLL1 is listed twice here.
+			 * While it looks suspicious, it's actually documented
+			 * that way both in the datasheet and in the code from
+			 * Allwinner.
+			 */
+			clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll1>;
+		};
+
+		axi: axi@01c20050 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-axi-clk";
+			reg = <0x01c20050 0x4>;
+			clocks = <&cpu>;
+		};
+
+		ahb1_mux: ahb1_mux@01c20054 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun6i-a31-ahb1-mux-clk";
+			reg = <0x01c20054 0x4>;
+			clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6>;
+		};
+
+		ahb1: ahb1@01c20054 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-ahb-clk";
+			reg = <0x01c20054 0x4>;
+			clocks = <&ahb1_mux>;
+		};
+
+		ahb1_gates: ahb1_gates@01c20060 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun6i-a31-ahb1-gates-clk";
+			reg = <0x01c20060 0x8>;
+			clocks = <&ahb1>;
+			clock-output-names = "ahb1_mipidsi", "ahb1_ss",
+					"ahb1_dma", "ahb1_mmc0", "ahb1_mmc1",
+					"ahb1_mmc2", "ahb1_mmc3", "ahb1_nand1",
+					"ahb1_nand0", "ahb1_sdram",
+					"ahb1_gmac", "ahb1_ts", "ahb1_hstimer",
+					"ahb1_spi0", "ahb1_spi1", "ahb1_spi2",
+					"ahb1_spi3", "ahb1_otg", "ahb1_ehci0",
+					"ahb1_ehci1", "ahb1_ohci0",
+					"ahb1_ohci1", "ahb1_ohci2", "ahb1_ve",
+					"ahb1_lcd0", "ahb1_lcd1", "ahb1_csi",
+					"ahb1_hdmi", "ahb1_de0", "ahb1_de1",
+					"ahb1_fe0", "ahb1_fe1", "ahb1_mp",
+					"ahb1_gpu", "ahb1_deu0", "ahb1_deu1",
+					"ahb1_drc0", "ahb1_drc1";
+		};
+
+		apb1: apb1@01c20054 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-apb0-clk";
+			reg = <0x01c20054 0x4>;
+			clocks = <&ahb1>;
+		};
+
+		apb1_gates: apb1_gates@01c20060 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun6i-a31-apb1-gates-clk";
+			reg = <0x01c20068 0x4>;
+			clocks = <&apb1>;
+			clock-output-names = "apb1_codec", "apb1_digital_mic",
+					"apb1_pio", "apb1_daudio0",
+					"apb1_daudio1";
+		};
+
+		apb2_mux: apb2_mux@01c20058 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-apb1-mux-clk";
+			reg = <0x01c20058 0x4>;
+			clocks = <&osc32k>, <&osc24M>, <&pll6>, <&pll6>;
+		};
+
+		apb2: apb2@01c20058 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun6i-a31-apb2-div-clk";
+			reg = <0x01c20058 0x4>;
+			clocks = <&apb2_mux>;
+		};
+
+		apb2_gates: apb2_gates@01c2006c {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun6i-a31-apb2-gates-clk";
+			reg = <0x01c2006c 0x8>;
+			clocks = <&apb2>;
+			clock-output-names = "apb2_i2c0", "apb2_i2c1",
+					"apb2_i2c2", "apb2_i2c3", "apb2_uart0",
+					"apb2_uart1", "apb2_uart2", "apb2_uart3",
+					"apb2_uart4", "apb2_uart5";
+		};
 	};
 
 	soc@01c00000 {
@@ -66,6 +190,25 @@ soc@01c00000 {
 		#size-cells = <1>;
 		ranges;
 
+		pio: pinctrl@01c20800 {
+			compatible = "allwinner,sun6i-a31-pinctrl";
+			reg = <0x01c20800 0x400>;
+			interrupts = <0 11 1>, <0 15 1>, <0 16 1>, <0 17 1>;
+			clocks = <&apb1_gates 5>;
+			gpio-controller;
+			interrupt-controller;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#gpio-cells = <3>;
+
+			uart0_pins_a: uart0@0 {
+				allwinner,pins = "PH20", "PH21";
+				allwinner,function = "uart0";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+		};
+
 		timer@01c20c00 {
 			compatible = "allwinner,sun4i-timer";
 			reg = <0x01c20c00 0xa0>;
@@ -74,7 +217,7 @@ timer@01c20c00 {
 				     <0 20 1>,
 				     <0 21 1>,
 				     <0 22 1>;
-			clocks = <&osc>;
+			clocks = <&osc24M>;
 		};
 
 		wdt1: watchdog@01c20ca0 {
@@ -88,7 +231,7 @@ uart0: serial@01c28000 {
 			interrupts = <0 0 1>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&osc>;
+			clocks = <&apb2_gates 16>;
 			status = "disabled";
 		};
 
@@ -98,7 +241,7 @@ uart1: serial@01c28400 {
 			interrupts = <0 1 1>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&osc>;
+			clocks = <&apb2_gates 17>;
 			status = "disabled";
 		};
 
@@ -108,7 +251,7 @@ uart2: serial@01c28800 {
 			interrupts = <0 2 1>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&osc>;
+			clocks = <&apb2_gates 18>;
 			status = "disabled";
 		};
 
@@ -118,7 +261,7 @@ uart3: serial@01c28c00 {
 			interrupts = <0 3 1>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&osc>;
+			clocks = <&apb2_gates 19>;
 			status = "disabled";
 		};
 
@@ -128,7 +271,7 @@ uart4: serial@01c29000 {
 			interrupts = <0 4 1>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&osc>;
+			clocks = <&apb2_gates 20>;
 			status = "disabled";
 		};
 
@@ -138,7 +281,7 @@ uart5: serial@01c29400 {
 			interrupts = <0 5 1>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&osc>;
+			clocks = <&apb2_gates 21>;
 			status = "disabled";
 		};
 

arch/arm/boot/dts/sun7i-a20-cubieboard2.dts

+/*
+ * Copyright 2013 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "sun7i-a20.dtsi"
+
+/ {
+	model = "Cubietech Cubieboard2";
+	compatible = "cubietech,cubieboard2", "allwinner,sun7i-a20";
+
+	soc@01c00000 {
+		pinctrl@01c20800 {
+			led_pins_cubieboard2: led_pins@0 {
+				allwinner,pins = "PH20", "PH21";
+				allwinner,function = "gpio_out";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+		};
+
+		uart0: serial@01c28000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_pins_a>;
+			status = "okay";
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_cubieboard2>;
+
+		blue {
+			label = "cubieboard2:blue:usr";
+			gpios = <&pio 7 21 0>;
+		};
+
+		green {
+			label = "cubieboard2:green:usr";
+			gpios = <&pio 7 20 0>;
+		};
+	};
+};

arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts

@@ -19,16 +19,43 @@ / {
 	compatible = "olimex,a20-olinuxino-micro", "allwinner,sun7i-a20";
 
 	soc@01c00000 {
+		pinctrl@01c20800 {
+			led_pins_olinuxino: led_pins@0 {
+				allwinner,pins = "PH2";
+				allwinner,function = "gpio_out";
+				allwinner,drive = <1>;
+				allwinner,pull = <0>;
+			};
+		};
+
 		uart0: serial@01c28000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_pins_a>;
 			status = "okay";
 		};
 
 		uart6: serial@01c29800 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart6_pins_a>;
 			status = "okay";
 		};
 
 		uart7: serial@01c29c00 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart7_pins_a>;
 			status = "okay";
 		};
 	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_olinuxino>;
+
+		green {
+			label = "a20-olinuxino-micro:green:usr";
+			gpios = <&pio 7 2 0>;
+			default-state = "on";
+		};
+	};
 };

arch/arm/boot/dts/sun7i-a20.dtsi

@@ -44,7 +44,8 @@ clocks {
 
 		osc24M: osc24M@01c20050 {
 			#clock-cells = <0>;
-			compatible = "fixed-clock";
+			compatible = "allwinner,sun4i-osc-clk";
+			reg = <0x01c20050 0x4>;
 			clock-frequency = <24000000>;
 		};
 
@@ -53,6 +54,111 @@ osc32k: osc32k {
 			compatible = "fixed-clock";
 			clock-frequency = <32768>;
 		};
+
+		pll1: pll1@01c20000 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-pll1-clk";
+			reg = <0x01c20000 0x4>;
+			clocks = <&osc24M>;
+		};
+
+		/*
+		 * This is a dummy clock, to be used as placeholder on
+		 * other mux clocks when a specific parent clock is not
+		 * yet implemented. It should be dropped when the driver
+		 * is complete.
+		 */
+		pll6: pll6 {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <0>;
+		};
+
+		cpu: cpu@01c20054 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-cpu-clk";
+			reg = <0x01c20054 0x4>;
+			clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll6>;
+		};
+
+		axi: axi@01c20054 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-axi-clk";
+			reg = <0x01c20054 0x4>;
+			clocks = <&cpu>;
+		};
+
+		ahb: ahb@01c20054 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-ahb-clk";
+			reg = <0x01c20054 0x4>;
+			clocks = <&axi>;
+		};
+
+		ahb_gates: ahb_gates@01c20060 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun7i-a20-ahb-gates-clk";
+			reg = <0x01c20060 0x8>;
+			clocks = <&ahb>;
+			clock-output-names = "ahb_usb0", "ahb_ehci0",
+				"ahb_ohci0", "ahb_ehci1", "ahb_ohci1",
+				"ahb_ss", "ahb_dma", "ahb_bist", "ahb_mmc0",
+				"ahb_mmc1", "ahb_mmc2", "ahb_mmc3", "ahb_ms",
+				"ahb_nand", "ahb_sdram", "ahb_ace",
+				"ahb_emac", "ahb_ts", "ahb_spi0", "ahb_spi1",
+				"ahb_spi2", "ahb_spi3", "ahb_sata",
+				"ahb_hstimer", "ahb_ve", "ahb_tvd", "ahb_tve0",
+				"ahb_tve1", "ahb_lcd0", "ahb_lcd1", "ahb_csi0",
+				"ahb_csi1", "ahb_hdmi1", "ahb_hdmi0",
+				"ahb_de_be0", "ahb_de_be1", "ahb_de_fe0",
+				"ahb_de_fe1", "ahb_gmac", "ahb_mp",
+				"ahb_mali";
+		};
+
+		apb0: apb0@01c20054 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-apb0-clk";
+			reg = <0x01c20054 0x4>;
+			clocks = <&ahb>;
+		};
+
+		apb0_gates: apb0_gates@01c20068 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun7i-a20-apb0-gates-clk";
+			reg = <0x01c20068 0x4>;
+			clocks = <&apb0>;
+			clock-output-names = "apb0_codec", "apb0_spdif",
+				"apb0_ac97", "apb0_iis0", "apb0_iis1",
+				"apb0_pio", "apb0_ir0", "apb0_ir1",
+				"apb0_iis2", "apb0_keypad";
+		};
+
+		apb1_mux: apb1_mux@01c20058 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-apb1-mux-clk";
+			reg = <0x01c20058 0x4>;
+			clocks = <&osc24M>, <&pll6>, <&osc32k>;
+		};
+
+		apb1: apb1@01c20058 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-apb1-clk";
+			reg = <0x01c20058 0x4>;
+			clocks = <&apb1_mux>;
+		};
+
+		apb1_gates: apb1_gates@01c2006c {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun7i-a20-apb1-gates-clk";
+			reg = <0x01c2006c 0x4>;
+			clocks = <&apb1>;
+			clock-output-names = "apb1_i2c0", "apb1_i2c1",
+				"apb1_i2c2", "apb1_i2c3", "apb1_can",
+				"apb1_scr", "apb1_ps20", "apb1_ps21",
+				"apb1_i2c4", "apb1_uart0", "apb1_uart1",
+				"apb1_uart2", "apb1_uart3", "apb1_uart4",
+				"apb1_uart5", "apb1_uart6", "apb1_uart7";
+		};
 	};
 
 	soc@01c00000 {
@@ -61,6 +167,39 @@ soc@01c00000 {
 		#size-cells = <1>;
 		ranges;
 
+		pio: pinctrl@01c20800 {
+			compatible = "allwinner,sun7i-a20-pinctrl";
+			reg = <0x01c20800 0x400>;
+			interrupts = <0 28 1>;
+			clocks = <&apb0_gates 5>;
+			gpio-controller;
+			interrupt-controller;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#gpio-cells = <3>;
+
+			uart0_pins_a: uart0@0 {
+				allwinner,pins = "PB22", "PB23";
+				allwinner,function = "uart0";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+
+			uart6_pins_a: uart6@0 {
+				allwinner,pins = "PI12", "PI13";
+				allwinner,function = "uart6";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+
+			uart7_pins_a: uart7@0 {
+				allwinner,pins = "PI20", "PI21";
+				allwinner,function = "uart7";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+		};
+
 		timer@01c20c00 {
 			compatible = "allwinner,sun4i-timer";
 			reg = <0x01c20c00 0x90>;
@@ -84,7 +223,7 @@ uart0: serial@01c28000 {
 			interrupts = <0 1 1>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&osc24M>;
+			clocks = <&apb1_gates 16>;
 			status = "disabled";
 		};
 
@@ -94,7 +233,7 @@ uart1: serial@01c28400 {
 			interrupts = <0 2 1>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&osc24M>;
+			clocks = <&apb1_gates 17>;
 			status = "disabled";
 		};
 
@@ -104,7 +243,7 @@ uart2: serial@01c28800 {
 			interrupts = <0 3 1>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&osc24M>;
+			clocks = <&apb1_gates 18>;
 			status = "disabled";
 		};
 
@@ -114,7 +253,7 @@ uart3: serial@01c28c00 {
 			interrupts = <0 4 1>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&osc24M>;
+			clocks = <&apb1_gates 19>;
 			status = "disabled";
 		};
 
@@ -124,7 +263,7 @@ uart4: serial@01c29000 {
 			interrupts = <0 17 1>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&osc24M>;
+			clocks = <&apb1_gates 20>;
 			status = "disabled";
 		};
 
@@ -134,7 +273,7 @@ uart5: serial@01c29400 {
 			interrupts = <0 18 1>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&osc24M>;
+			clocks = <&apb1_gates 21>;
 			status = "disabled";
 		};
 
@@ -144,7 +283,7 @@ uart6: serial@01c29800 {
 			interrupts = <0 19 1>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&osc24M>;
+			clocks = <&apb1_gates 22>;
 			status = "disabled";
 		};
 
@@ -154,7 +293,7 @@ uart7: serial@01c29c00 {
 			interrupts = <0 20 1>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&osc24M>;
+			clocks = <&apb1_gates 23>;
 			status = "disabled";
 		};
 

arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts

@@ -37,30 +37,35 @@ cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0>;
+			cci-control-port = <&cci_control1>;
 		};
 
 		cpu1: cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <1>;
+			cci-control-port = <&cci_control1>;
 		};
 
 		cpu2: cpu@2 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a7";
 			reg = <0x100>;
+			cci-control-port = <&cci_control2>;
 		};
 
 		cpu3: cpu@3 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a7";
 			reg = <0x101>;
+			cci-control-port = <&cci_control2>;
 		};
 
 		cpu4: cpu@4 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a7";
 			reg = <0x102>;
+			cci-control-port = <&cci_control2>;
 		};
 	};
 
@@ -104,6 +109,26 @@ gic: interrupt-controller@2c001000 {
 		interrupts = <1 9 0xf04>;
 	};
 
+	cci@2c090000 {
+		compatible = "arm,cci-400";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0 0x2c090000 0 0x1000>;
+		ranges = <0x0 0x0 0x2c090000 0x10000>;
+
+		cci_control1: slave-if@4000 {
+			compatible = "arm,cci-400-ctrl-if";
+			interface-type = "ace";
+			reg = <0x4000 0x1000>;
+		};
+
+		cci_control2: slave-if@5000 {
+			compatible = "arm,cci-400-ctrl-if";
+			interface-type = "ace";
+			reg = <0x5000 0x1000>;
+		};
+	};
+
 	memory-controller@7ffd0000 {
 		compatible = "arm,pl354", "arm,primecell";
 		reg = <0 0x7ffd0000 0 0x1000>;

arch/arm/configs/at91_dt_defconfig

@@ -14,11 +14,13 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
 CONFIG_ARCH_AT91=y
+CONFIG_SOC_AT91RM9200=y
 CONFIG_SOC_AT91SAM9260=y
 CONFIG_SOC_AT91SAM9263=y
 CONFIG_SOC_AT91SAM9G45=y
 CONFIG_SOC_AT91SAM9X5=y
 CONFIG_SOC_AT91SAM9N12=y
+CONFIG_MACH_AT91RM9200_DT=y
 CONFIG_MACH_AT91SAM9_DT=y
 CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
 CONFIG_AT91_TIMER_HZ=128
@@ -62,6 +64,7 @@ CONFIG_MTD=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
+CONFIG_MTD_DATAFLASH=y
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_ATMEL=y
 CONFIG_MTD_UBI=y
@@ -78,7 +81,6 @@ CONFIG_BLK_DEV_SD=y
 CONFIG_SCSI_MULTI_LUN=y
 # CONFIG_SCSI_LOWLEVEL is not set
 CONFIG_NETDEVICES=y
-CONFIG_MII=y
 CONFIG_MACB=y
 # CONFIG_NET_VENDOR_BROADCOM is not set
 # CONFIG_NET_VENDOR_FARADAY is not set

arch/arm/include/asm/mach/arch.h

@@ -35,7 +35,7 @@ struct machine_desc {
 	unsigned int		nr_irqs;	/* number of IRQs */
 
 #ifdef CONFIG_ZONE_DMA
-	unsigned long		dma_zone_size;	/* size of DMA-able area */
+	phys_addr_t		dma_zone_size;	/* size of DMA-able area */
 #endif
 
 	unsigned int		video_start;	/* start of video RAM	*/

arch/arm/include/asm/outercache.h

@@ -37,10 +37,10 @@ struct outer_cache_fns {
 	void (*resume)(void);
 };
 
-#ifdef CONFIG_OUTER_CACHE
-
 extern struct outer_cache_fns outer_cache;
 
+#ifdef CONFIG_OUTER_CACHE
+
 static inline void outer_inv_range(phys_addr_t start, phys_addr_t end)
 {
 	if (outer_cache.inv_range)

arch/arm/mach-at91/include/mach/hardware.h

@@ -33,6 +33,7 @@
 #include <mach/at91sam9g45.h>
 #include <mach/at91sam9x5.h>
 #include <mach/at91sam9n12.h>
+#include <mach/sama5d3.h>
 
 /*
  * On all at91 except rm9200 and x40 have the System Controller starts

arch/arm/mach-at91/include/mach/sama5d3.h

@@ -64,6 +64,14 @@
 #define SAMA5D3_ID_TRNG		45	/* True Random Generator Number */
 #define SAMA5D3_ID_IRQ0		47	/* Advanced Interrupt Controller (IRQ0) */
 
+/*
+ * User Peripheral physical base addresses.
+ */
+#define SAMA5D3_BASE_USART0	0xf001c000
+#define SAMA5D3_BASE_USART1	0xf0020000
+#define SAMA5D3_BASE_USART2	0xf8020000
+#define SAMA5D3_BASE_USART3	0xf8024000
+
 /*
  * Internal Memory
  */

arch/arm/mach-at91/include/mach/uncompress.h

@@ -94,6 +94,15 @@ static const u32 uarts_sam9x5[] = {
 	0,
 };
 
+static const u32 uarts_sama5[] = {
+	AT91_BASE_DBGU1,
+	SAMA5D3_BASE_USART0,
+	SAMA5D3_BASE_USART1,
+	SAMA5D3_BASE_USART2,
+	SAMA5D3_BASE_USART3,
+	0,
+};
+
 static inline const u32* decomp_soc_detect(void __iomem *dbgu_base)
 {
 	u32 cidr, socid;
@@ -121,8 +130,12 @@ static inline const u32* decomp_soc_detect(void __iomem *dbgu_base)
 	case ARCH_ID_AT91SAM9RL64:
 		return uarts_sam9rl;
 
+	case ARCH_ID_AT91SAM9N12:
 	case ARCH_ID_AT91SAM9X5:
 		return uarts_sam9x5;
+
+	case ARCH_ID_SAMA5D3:
+		return uarts_sama5;
 	}
 
 	/* at91sam9g10 */

arch/arm/mach-exynos/Kconfig

@@ -36,6 +36,7 @@ config CPU_EXYNOS4210
 	bool "SAMSUNG EXYNOS4210"
 	default y
 	depends on ARCH_EXYNOS4
+	select ARCH_HAS_BANDGAP
 	select ARM_CPU_SUSPEND if PM
 	select PINCTRL_EXYNOS
 	select PM_GENERIC_DOMAINS if PM
@@ -49,7 +50,9 @@ config SOC_EXYNOS4212
 	bool "SAMSUNG EXYNOS4212"
 	default y
 	depends on ARCH_EXYNOS4
+	select ARCH_HAS_BANDGAP
 	select PINCTRL_EXYNOS
+	select PM_GENERIC_DOMAINS if PM
 	select S5P_PM if PM
 	select S5P_SLEEP if PM
 	select SAMSUNG_DMADEV
@@ -60,7 +63,9 @@ config SOC_EXYNOS4412
 	bool "SAMSUNG EXYNOS4412"
 	default y
 	depends on ARCH_EXYNOS4
+	select ARCH_HAS_BANDGAP
 	select PINCTRL_EXYNOS
+	select PM_GENERIC_DOMAINS if PM
 	select SAMSUNG_DMADEV
 	help
 	  Enable EXYNOS4412 SoC support
@@ -69,6 +74,7 @@ config SOC_EXYNOS5250
 	bool "SAMSUNG EXYNOS5250"
 	default y
 	depends on ARCH_EXYNOS5
+	select ARCH_HAS_BANDGAP
 	select PINCTRL_EXYNOS
 	select PM_GENERIC_DOMAINS if PM
 	select S5P_PM if PM
@@ -93,6 +99,7 @@ config SOC_EXYNOS5440
 	default y
 	depends on ARCH_EXYNOS5
 	select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
+	select ARCH_HAS_BANDGAP
 	select ARCH_HAS_OPP
 	select HAVE_ARM_ARCH_TIMER
 	select AUTO_ZRELADDR

arch/arm/mach-exynos/cpuidle.c

@@ -200,6 +200,9 @@ static int __init exynos4_init_cpuidle(void)
 	if (soc_is_exynos5250())
 		exynos5_core_down_clk();
 
+	if (soc_is_exynos5440())
+		exynos4_idle_driver.state_count = 1;
+
 	ret = cpuidle_register_driver(&exynos4_idle_driver);
 	if (ret) {
 		printk(KERN_ERR "CPUidle failed to register driver\n");

arch/arm/mach-highbank/Kconfig

 config ARCH_HIGHBANK
 	bool "Calxeda ECX-1000/2000 (Highbank/Midway)" if ARCH_MULTI_V7
+	select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
 	select ARCH_HAS_CPUFREQ
+	select ARCH_HAS_HOLES_MEMORYMODEL
 	select ARCH_HAS_OPP
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select ARM_AMBA
+	select ARM_ERRATA_764369
+	select ARM_ERRATA_775420
+	select ARM_ERRATA_798181
 	select ARM_GIC
 	select ARM_TIMER_SP804
 	select CACHE_L2X0
@@ -18,3 +23,4 @@ config ARCH_HIGHBANK
 	select PL320_MBOX
 	select SPARSE_IRQ
 	select USE_OF
+	select ZONE_DMA if ARM_LPAE

arch/arm/mach-highbank/highbank.c

@@ -18,14 +18,11 @@
 #include <linux/clocksource.h>
 #include <linux/dma-mapping.h>
 #include <linux/io.h>
-#include <linux/irq.h>
 #include <linux/irqchip.h>
-#include <linux/irqdomain.h>
 #include <linux/of.h>
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
 #include <linux/of_address.h>
-#include <linux/smp.h>
 #include <linux/amba/bus.h>
 #include <linux/clk-provider.h>
 
@@ -35,7 +32,6 @@
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/mach/time.h>
 
 #include "core.h"
 #include "sysregs.h"
@@ -65,13 +61,11 @@ void highbank_set_cpu_jump(int cpu, void *jump_addr)
 			  HB_JUMP_TABLE_PHYS(cpu) + 15);
 }
 
-#ifdef CONFIG_CACHE_L2X0
 static void highbank_l2x0_disable(void)
 {
 	/* Disable PL310 L2 Cache controller */
 	highbank_smc1(0x102, 0x0);
 }
-#endif
 
 static void __init highbank_init_irq(void)
 {
@@ -80,12 +74,13 @@ static void __init highbank_init_irq(void)
 	if (of_find_compatible_node(NULL, NULL, "arm,cortex-a9"))
 		highbank_scu_map_io();
 
-#ifdef CONFIG_CACHE_L2X0
 	/* Enable PL310 L2 Cache controller */
-	highbank_smc1(0x102, 0x1);
-	l2x0_of_init(0, ~0UL);
-	outer_cache.disable = highbank_l2x0_disable;
-#endif
+	if (IS_ENABLED(CONFIG_CACHE_L2X0) &&
+	    of_find_compatible_node(NULL, NULL, "arm,pl310-cache")) {
+		highbank_smc1(0x102, 0x1);
+		l2x0_of_init(0, ~0UL);
+		outer_cache.disable = highbank_l2x0_disable;
+	}
 }
 
 static void __init highbank_timer_init(void)
@@ -176,6 +171,9 @@ static const char *highbank_match[] __initconst = {
 };
 
 DT_MACHINE_START(HIGHBANK, "Highbank")
+#if defined(CONFIG_ZONE_DMA) && defined(CONFIG_ARM_LPAE)
+	.dma_zone_size	= (4ULL * SZ_1G),
+#endif
 	.smp		= smp_ops(highbank_smp_ops),
 	.init_irq	= highbank_init_irq,
 	.init_time	= highbank_timer_init,

arch/arm/mach-mmp/Makefile

@@ -2,7 +2,7 @@
 # Makefile for Marvell's PXA168 processors line
 #
 
-obj-y				+= common.o devices.o time.o irq.o
+obj-y				+= common.o devices.o time.o
 
 # SoC support
 obj-$(CONFIG_CPU_PXA168)	+= pxa168.o

arch/arm/mach-mmp/common.h

@@ -3,7 +3,6 @@
 
 extern void timer_init(int irq);
 
-extern void __init icu_init_irq(void);
 extern void __init mmp_map_io(void);
 extern void mmp_restart(enum reboot_mode, const char *);
 extern void __init pxa168_clk_init(void);

arch/arm/mach-mmp/include/mach/entry-macro.S

-/*
- * linux/arch/arm/mach-mmp/include/mach/entry-macro.S
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <asm/irq.h>
-#include <mach/regs-icu.h>
-
-	.macro	get_irqnr_preamble, base, tmp
-	mrc	p15, 0, \tmp, c0, c0, 0		@ CPUID
-	and	\tmp, \tmp, #0xff00
-	cmp	\tmp, #0x5800
-	ldr	\base, =mmp_icu_base
-	ldr	\base, [\base, #0]
-	addne	\base, \base, #0x10c		@ PJ1 AP INT SEL register
-	addeq	\base, \base, #0x104		@ PJ4 IRQ SEL register
-	.endm
-
-	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-	ldr	\tmp, [\base, #0]
-	and	\irqnr, \tmp, #0x3f
-	tst	\tmp, #(1 << 6)
-	.endm

arch/arm/mach-mmp/include/mach/pxa168.h

@@ -4,6 +4,7 @@
 #include <linux/reboot.h>
 
 extern void pxa168_timer_init(void);
+extern void __init icu_init_irq(void);
 extern void __init pxa168_init_irq(void);
 extern void pxa168_restart(enum reboot_mode, const char *);
 extern void pxa168_clear_keypad_wakeup(void);

arch/arm/mach-mmp/include/mach/pxa910.h

@@ -2,6 +2,7 @@
 #define __ASM_MACH_PXA910_H
 
 extern void pxa910_timer_init(void);
+extern void __init icu_init_irq(void);
 extern void __init pxa910_init_irq(void);
 
 #include <linux/i2c.h>

arch/arm/mach-mmp/mmp-dt.c

@@ -9,17 +9,13 @@
  *  publishhed by the Free Software Foundation.
  */
 
-#include <linux/irq.h>
-#include <linux/irqdomain.h>
-#include <linux/of_irq.h>
+#include <linux/irqchip.h>
 #include <linux/of_platform.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
-#include <mach/irqs.h>
 
 #include "common.h"
 
-extern void __init mmp_dt_irq_init(void);
 extern void __init mmp_dt_init_timer(void);
 
 static const struct of_dev_auxdata pxa168_auxdata_lookup[] __initconst = {
@@ -64,7 +60,6 @@ static const char *mmp_dt_board_compat[] __initdata = {
 
 DT_MACHINE_START(PXA168_DT, "Marvell PXA168 (Device Tree Support)")
 	.map_io		= mmp_map_io,
-	.init_irq	= mmp_dt_irq_init,
 	.init_time	= mmp_dt_init_timer,
 	.init_machine	= pxa168_dt_init,
 	.dt_compat	= mmp_dt_board_compat,
@@ -72,7 +67,6 @@ MACHINE_END
 
 DT_MACHINE_START(PXA910_DT, "Marvell PXA910 (Device Tree Support)")
 	.map_io		= mmp_map_io,
-	.init_irq	= mmp_dt_irq_init,
 	.init_time	= mmp_dt_init_timer,
 	.init_machine	= pxa910_dt_init,
 	.dt_compat	= mmp_dt_board_compat,

arch/arm/mach-mmp/mmp2-dt.c

@@ -10,18 +10,13 @@
  */
 
 #include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/irqdomain.h>
-#include <linux/of_irq.h>
+#include <linux/irqchip.h>
 #include <linux/of_platform.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
-#include <mach/irqs.h>
-#include <mach/regs-apbc.h>
 
 #include "common.h"
 
-extern void __init mmp_dt_irq_init(void);
 extern void __init mmp_dt_init_timer(void);
 
 static const struct of_dev_auxdata mmp2_auxdata_lookup[] __initconst = {
@@ -49,7 +44,6 @@ static const char *mmp2_dt_board_compat[] __initdata = {
 
 DT_MACHINE_START(MMP2_DT, "Marvell MMP2 (Device Tree Support)")
 	.map_io		= mmp_map_io,
-	.init_irq	= mmp_dt_irq_init,
 	.init_time	= mmp_dt_init_timer,
 	.init_machine	= mmp2_dt_init,
 	.dt_compat	= mmp2_dt_board_compat,

arch/arm/mach-mmp/mmp2.c

@@ -13,6 +13,8 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/irqchip/mmp.h>
 #include <linux/platform_device.h>
 
 #include <asm/hardware/cache-tauros2.h>
@@ -26,6 +28,7 @@
 #include <mach/mfp.h>
 #include <mach/devices.h>
 #include <mach/mmp2.h>
+#include <mach/pm-mmp2.h>
 
 #include "common.h"
 
@@ -94,6 +97,9 @@ void mmp2_clear_pmic_int(void)
 void __init mmp2_init_irq(void)
 {
 	mmp2_init_icu();
+#ifdef CONFIG_PM
+	icu_irq_chip.irq_set_wake = mmp2_set_wake;
+#endif
 }
 
 static int __init mmp2_init(void)

arch/arm/mach-mmp/pxa910.c

@@ -12,6 +12,8 @@
 #include <linux/init.h>
 #include <linux/list.h>
 #include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/irqchip/mmp.h>
 #include <linux/platform_device.h>
 
 #include <asm/hardware/cache-tauros2.h>
@@ -23,6 +25,8 @@
 #include <mach/dma.h>
 #include <mach/mfp.h>
 #include <mach/devices.h>
+#include <mach/pm-pxa910.h>
+#include <mach/pxa910.h>
 
 #include "common.h"
 
@@ -79,6 +83,9 @@ static struct mfp_addr_map pxa910_mfp_addr_map[] __initdata =
 void __init pxa910_init_irq(void)
 {
 	icu_init_irq();
+#ifdef CONFIG_PM
+	icu_irq_chip.irq_set_wake = pxa910_set_wake;
+#endif
 }
 
 static int __init pxa910_init(void)

arch/arm/mach-omap2/Makefile

@@ -63,6 +63,7 @@ obj-$(CONFIG_SOC_AM33XX)		+= am33xx-restart.o
 obj-$(CONFIG_ARCH_OMAP3)		+= omap3-restart.o
 obj-$(CONFIG_ARCH_OMAP4)		+= omap4-restart.o
 obj-$(CONFIG_SOC_OMAP5)			+= omap4-restart.o
+obj-$(CONFIG_SOC_DRA7XX)		+= omap4-restart.o
 
 # Pin multiplexing
 obj-$(CONFIG_SOC_OMAP2420)		+= mux2420.o
@@ -148,6 +149,7 @@ obj-$(CONFIG_SOC_AM43XX)		+= $(powerdomain-common)
 obj-$(CONFIG_SOC_OMAP5)			+= $(powerdomain-common)
 obj-$(CONFIG_SOC_OMAP5)			+= powerdomains54xx_data.o
 obj-$(CONFIG_SOC_DRA7XX)		+= $(powerdomain-common)
+obj-$(CONFIG_SOC_DRA7XX)		+= powerdomains7xx_data.o
 
 # PRCM clockdomain control
 clockdomain-common			+= clockdomain.o
@@ -166,6 +168,7 @@ obj-$(CONFIG_SOC_AM43XX)		+= $(clockdomain-common)
 obj-$(CONFIG_SOC_OMAP5)			+= $(clockdomain-common)
 obj-$(CONFIG_SOC_OMAP5)			+= clockdomains54xx_data.o
 obj-$(CONFIG_SOC_DRA7XX)		+= $(clockdomain-common)
+obj-$(CONFIG_SOC_DRA7XX)		+= clockdomains7xx_data.o
 
 # Clock framework
 obj-$(CONFIG_ARCH_OMAP2)		+= $(clock-common) clock2xxx.o
@@ -209,6 +212,7 @@ obj-$(CONFIG_ARCH_OMAP3)		+= omap_hwmod_3xxx_data.o
 obj-$(CONFIG_SOC_AM33XX)		+= omap_hwmod_33xx_data.o
 obj-$(CONFIG_ARCH_OMAP4)		+= omap_hwmod_44xx_data.o
 obj-$(CONFIG_SOC_OMAP5)			+= omap_hwmod_54xx_data.o
+obj-$(CONFIG_SOC_DRA7XX)		+= omap_hwmod_7xx_data.o
 
 # EMU peripherals
 obj-$(CONFIG_OMAP3_EMU)			+= emu.o

arch/arm/mach-omap2/board-generic.c

@@ -238,5 +238,6 @@ DT_MACHINE_START(DRA7XX_DT, "Generic DRA7XX (Flattened Device Tree)")
 	.init_machine	= omap_generic_init,
 	.init_time	= omap5_realtime_timer_init,
 	.dt_compat	= dra7xx_boards_compat,
+	.restart	= omap44xx_restart,
 MACHINE_END
 #endif

arch/arm/mach-omap2/cclock33xx_data.c

@@ -421,6 +421,10 @@ static struct clk aes0_fck;
 DEFINE_STRUCT_CLK_HW_OMAP(aes0_fck, NULL);
 DEFINE_STRUCT_CLK(aes0_fck, dpll_core_ck_parents, clk_ops_null);
 
+static struct clk rng_fck;
+DEFINE_STRUCT_CLK_HW_OMAP(rng_fck, NULL);
+DEFINE_STRUCT_CLK(rng_fck, dpll_core_ck_parents, clk_ops_null);
+
 /*
  * Modules clock nodes
  *
@@ -966,6 +970,7 @@ static struct omap_clk am33xx_clks[] = {
 	CLK(NULL,	"smartreflex1_fck",	&smartreflex1_fck),
 	CLK(NULL,	"sha0_fck",		&sha0_fck),
 	CLK(NULL,	"aes0_fck",		&aes0_fck),
+	CLK(NULL,	"rng_fck",		&rng_fck),
 	CLK(NULL,	"timer1_fck",		&timer1_fck),
 	CLK(NULL,	"timer2_fck",		&timer2_fck),
 	CLK(NULL,	"timer3_fck",		&timer3_fck),

arch/arm/mach-omap2/cclock44xx_data.c

@@ -1706,6 +1706,18 @@ int __init omap4xxx_clk_init(void)
 
 	omap2_clk_disable_autoidle_all();
 
+	/*
+	 * A set rate of ABE DPLL inturn triggers a set rate of USB DPLL
+	 * when its in bypass. So always lock USB before ABE DPLL.
+	 */
+	/*
+	 * Lock USB DPLL on OMAP4 devices so that the L3INIT power
+	 * domain can transition to retention state when not in use.
+	 */
+	rc = clk_set_rate(&dpll_usb_ck, OMAP4_DPLL_USB_DEFFREQ);
+	if (rc)
+		pr_err("%s: failed to configure USB DPLL!\n", __func__);
+
 	/*
 	 * On OMAP4460 the ABE DPLL fails to turn on if in idle low-power
 	 * state when turning the ABE clock domain. Workaround this by
@@ -1718,13 +1730,5 @@ int __init omap4xxx_clk_init(void)
 	if (rc)
 		pr_err("%s: failed to configure ABE DPLL!\n", __func__);
 
-	/*
-	 * Lock USB DPLL on OMAP4 devices so that the L3INIT power
-	 * domain can transition to retention state when not in use.
-	 */
-	rc = clk_set_rate(&dpll_usb_ck, OMAP4_DPLL_USB_DEFFREQ);
-	if (rc)
-		pr_err("%s: failed to configure USB DPLL!\n", __func__);
-
 	return 0;
 }

arch/arm/mach-omap2/clockdomain.h

@@ -217,6 +217,7 @@ extern void __init omap3xxx_clockdomains_init(void);
 extern void __init am33xx_clockdomains_init(void);
 extern void __init omap44xx_clockdomains_init(void);
 extern void __init omap54xx_clockdomains_init(void);
+extern void __init dra7xx_clockdomains_init(void);
 
 extern void clkdm_add_autodeps(struct clockdomain *clkdm);
 extern void clkdm_del_autodeps(struct clockdomain *clkdm);

arch/arm/mach-omap2/cm-regbits-7xx.h

+/*
+ * DRA7xx Clock Management register bits
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com
+ *
+ * Generated by code originally written by:
+ * Paul Walmsley (paul@pwsan.com)
+ * Rajendra Nayak (rnayak@ti.com)
+ * Benoit Cousson (b-cousson@ti.com)
+ *
+ * This file is automatically generated from the OMAP hardware databases.
+ * We respectfully ask that any modifications to this file be coordinated
+ * with the public linux-omap@vger.kernel.org mailing list and the
+ * authors above to ensure that the autogeneration scripts are kept
+ * up-to-date with the file contents.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_CM_REGBITS_7XX_H
+#define __ARCH_ARM_MACH_OMAP2_CM_REGBITS_7XX_H
+
+#define DRA7XX_ATL_STATDEP_SHIFT				30
+#define DRA7XX_CAM_STATDEP_SHIFT				9
+#define DRA7XX_DSP1_STATDEP_SHIFT				1
+#define DRA7XX_DSP2_STATDEP_SHIFT				18
+#define DRA7XX_DSS_STATDEP_SHIFT				8
+#define DRA7XX_EMIF_STATDEP_SHIFT				4
+#define DRA7XX_EVE1_STATDEP_SHIFT				19
+#define DRA7XX_EVE2_STATDEP_SHIFT				20
+#define DRA7XX_EVE3_STATDEP_SHIFT				21
+#define DRA7XX_EVE4_STATDEP_SHIFT				22
+#define DRA7XX_GMAC_STATDEP_SHIFT				25
+#define DRA7XX_GPU_STATDEP_SHIFT				10
+#define DRA7XX_IPU1_STATDEP_SHIFT				23
+#define DRA7XX_IPU2_STATDEP_SHIFT				0
+#define DRA7XX_IPU_STATDEP_SHIFT				24
+#define DRA7XX_IVA_STATDEP_SHIFT				2
+#define DRA7XX_L3INIT_STATDEP_SHIFT				7
+#define DRA7XX_L3MAIN1_STATDEP_SHIFT				5
+#define DRA7XX_L4CFG_STATDEP_SHIFT				12
+#define DRA7XX_L4PER2_STATDEP_SHIFT				26
+#define DRA7XX_L4PER3_STATDEP_SHIFT				27
+#define DRA7XX_L4PER_STATDEP_SHIFT				13
+#define DRA7XX_L4SEC_STATDEP_SHIFT				14
+#define DRA7XX_PCIE_STATDEP_SHIFT				29
+#define DRA7XX_VPE_STATDEP_SHIFT				28
+#define DRA7XX_WKUPAON_STATDEP_SHIFT				15
+#endif

arch/arm/mach-omap2/io.c

@@ -665,6 +665,11 @@ void __init dra7xx_init_early(void)
 	omap2_set_globals_prcm_mpu(OMAP2_L4_IO_ADDRESS(OMAP54XX_PRCM_MPU_BASE));
 	omap_prm_base_init();
 	omap_cm_base_init();
+	omap44xx_prm_init();
+	dra7xx_powerdomains_init();
+	dra7xx_clockdomains_init();
+	dra7xx_hwmod_init();
+	omap_hwmod_init_postsetup();
 }
 #endif
 

arch/arm/mach-omap2/omap_hwmod.c

@@ -1405,7 +1405,9 @@ static void _enable_sysc(struct omap_hwmod *oh)
 	    (sf & SYSC_HAS_CLOCKACTIVITY))
 		_set_clockactivity(oh, oh->class->sysc->clockact, &v);
 
-	_write_sysconfig(v, oh);
+	/* If the cached value is the same as the new value, skip the write */
+	if (oh->_sysc_cache != v)
+		_write_sysconfig(v, oh);
 
 	/*
 	 * Set the autoidle bit only after setting the smartidle bit

arch/arm/mach-omap2/omap_hwmod.h

@@ -751,6 +751,7 @@ extern int omap3xxx_hwmod_init(void);
 extern int omap44xx_hwmod_init(void);
 extern int omap54xx_hwmod_init(void);
 extern int am33xx_hwmod_init(void);
+extern int dra7xx_hwmod_init(void);
 
 extern int __init omap_hwmod_register_links(struct omap_hwmod_ocp_if **ois);
 

arch/arm/mach-omap2/omap_hwmod_33xx_data.c

@@ -325,7 +325,6 @@ static struct omap_hwmod am33xx_adc_tsc_hwmod = {
  *
  *    - cEFUSE (doesn't fall under any ocp_if)
  *    - clkdiv32k
- *    - debugss
  *    - ocp watch point
  */
 #if 0
@@ -369,27 +368,6 @@ static struct omap_hwmod am33xx_clkdiv32k_hwmod = {
 	},
 };
 
-/*
- * 'debugss' class
- * debug sub system
- */
-static struct omap_hwmod_class am33xx_debugss_hwmod_class = {
-	.name		= "debugss",
-};
-
-static struct omap_hwmod am33xx_debugss_hwmod = {
-	.name		= "debugss",
-	.class		= &am33xx_debugss_hwmod_class,
-	.clkdm_name	= "l3_aon_clkdm",
-	.main_clk	= "debugss_ick",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_WKUP_DEBUGSS_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
 /* ocpwp */
 static struct omap_hwmod_class am33xx_ocpwp_hwmod_class = {
 	.name		= "ocpwp",
@@ -482,6 +460,34 @@ static struct omap_hwmod am33xx_ocmcram_hwmod = {
 	},
 };
 
+/*
+ * 'debugss' class
+ * debug sub system
+ */
+static struct omap_hwmod_opt_clk debugss_opt_clks[] = {
+	{ .role = "dbg_sysclk", .clk = "dbg_sysclk_ck" },
+	{ .role = "dbg_clka", .clk = "dbg_clka_ck" },
+};
+
+static struct omap_hwmod_class am33xx_debugss_hwmod_class = {
+	.name		= "debugss",
+};
+
+static struct omap_hwmod am33xx_debugss_hwmod = {
+	.name		= "debugss",
+	.class		= &am33xx_debugss_hwmod_class,
+	.clkdm_name	= "l3_aon_clkdm",
+	.main_clk	= "trace_clk_div_ck",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs	= AM33XX_CM_WKUP_DEBUGSS_CLKCTRL_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+	.opt_clks	= debugss_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(debugss_opt_clks),
+};
+
 /* 'smartreflex' class */
 static struct omap_hwmod_class am33xx_smartreflex_hwmod_class = {
 	.name		= "smartreflex",
@@ -1796,6 +1802,24 @@ static struct omap_hwmod_ocp_if am33xx_l3_main__gfx = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
+/* l3_main -> debugss */
+static struct omap_hwmod_addr_space am33xx_debugss_addrs[] = {
+	{
+		.pa_start	= 0x4b000000,
+		.pa_end		= 0x4b000000 + SZ_16M - 1,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l3_main__debugss = {
+	.master		= &am33xx_l3_main_hwmod,
+	.slave		= &am33xx_debugss_hwmod,
+	.clk		= "dpll_core_m4_ck",
+	.addr		= am33xx_debugss_addrs,
+	.user		= OCP_USER_MPU,
+};
+
 /* l4 wkup -> smartreflex0 */
 static struct omap_hwmod_ocp_if am33xx_l4_wkup__smartreflex0 = {
 	.master		= &am33xx_l4_wkup_hwmod,
@@ -2470,6 +2494,7 @@ static struct omap_hwmod_ocp_if *am33xx_hwmod_ocp_ifs[] __initdata = {
 	&am33xx_pruss__l3_main,
 	&am33xx_wkup_m3__l4_wkup,
 	&am33xx_gfx__l3_main,
+	&am33xx_l3_main__debugss,
 	&am33xx_l4_wkup__wkup_m3,
 	&am33xx_l4_wkup__control,
 	&am33xx_l4_wkup__smartreflex0,

arch/arm/mach-omap2/omap_hwmod_54xx_data.c

@@ -739,6 +739,39 @@ static struct omap_hwmod omap54xx_kbd_hwmod = {
 	},
 };
 
+/*
+ * 'mailbox' class
+ * mailbox module allowing communication between the on-chip processors using a
+ * queued mailbox-interrupt mechanism.
+ */
+
+static struct omap_hwmod_class_sysconfig omap54xx_mailbox_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.sysc_flags	= (SYSC_HAS_RESET_STATUS | SYSC_HAS_SIDLEMODE |
+			   SYSC_HAS_SOFTRESET),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+	.sysc_fields	= &omap_hwmod_sysc_type2,
+};
+
+static struct omap_hwmod_class omap54xx_mailbox_hwmod_class = {
+	.name	= "mailbox",
+	.sysc	= &omap54xx_mailbox_sysc,
+};
+
+/* mailbox */
+static struct omap_hwmod omap54xx_mailbox_hwmod = {
+	.name		= "mailbox",
+	.class		= &omap54xx_mailbox_hwmod_class,
+	.clkdm_name	= "l4cfg_clkdm",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = OMAP54XX_CM_L4CFG_MAILBOX_CLKCTRL_OFFSET,
+			.context_offs = OMAP54XX_RM_L4CFG_MAILBOX_CONTEXT_OFFSET,
+		},
+	},
+};
+
 /*
  * 'mcbsp' class
  * multi channel buffered serial port controller
@@ -1807,6 +1840,14 @@ static struct omap_hwmod_ocp_if omap54xx_l4_wkup__kbd = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
+/* l4_cfg -> mailbox */
+static struct omap_hwmod_ocp_if omap54xx_l4_cfg__mailbox = {
+	.master		= &omap54xx_l4_cfg_hwmod,
+	.slave		= &omap54xx_mailbox_hwmod,
+	.clk		= "l4_root_clk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
 /* l4_abe -> mcbsp1 */
 static struct omap_hwmod_ocp_if omap54xx_l4_abe__mcbsp1 = {
 	.master		= &omap54xx_l4_abe_hwmod,
@@ -2107,6 +2148,7 @@ static struct omap_hwmod_ocp_if *omap54xx_hwmod_ocp_ifs[] __initdata = {
 	&omap54xx_l4_per__i2c4,
 	&omap54xx_l4_per__i2c5,
 	&omap54xx_l4_wkup__kbd,
+	&omap54xx_l4_cfg__mailbox,
 	&omap54xx_l4_abe__mcbsp1,
 	&omap54xx_l4_abe__mcbsp2,
 	&omap54xx_l4_abe__mcbsp3,

arch/arm/mach-omap2/powerdomain.h

@@ -256,6 +256,7 @@ extern void omap3xxx_powerdomains_init(void);
 extern void am33xx_powerdomains_init(void);
 extern void omap44xx_powerdomains_init(void);
 extern void omap54xx_powerdomains_init(void);
+extern void dra7xx_powerdomains_init(void);
 
 extern struct pwrdm_ops omap2_pwrdm_operations;
 extern struct pwrdm_ops omap3_pwrdm_operations;

arch/arm/mach-omap2/powerdomains3xxx_data.c

@@ -336,6 +336,13 @@ static struct powerdomain dpll5_pwrdm = {
 	.voltdm		  = { .name = "core" },
 };
 
+static struct powerdomain alwon_81xx_pwrdm = {
+	.name		  = "alwon_pwrdm",
+	.prcm_offs	  = TI81XX_PRM_ALWON_MOD,
+	.pwrsts		  = PWRSTS_OFF_ON,
+	.voltdm		  = { .name = "core" },
+};
+
 static struct powerdomain device_81xx_pwrdm = {
 	.name		  = "device_pwrdm",
 	.prcm_offs	  = TI81XX_PRM_DEVICE_MOD,
@@ -442,6 +449,7 @@ static struct powerdomain *powerdomains_am35x[] __initdata = {
 };
 
 static struct powerdomain *powerdomains_ti81xx[] __initdata = {
+	&alwon_81xx_pwrdm,
 	&device_81xx_pwrdm,
 	&active_816x_pwrdm,
 	&default_816x_pwrdm,

arch/arm/mach-omap2/prcm-common.h

@@ -58,6 +58,7 @@
 #define TI816X_PRM_IVAHD1_MOD			0x0d00
 #define TI816X_PRM_IVAHD2_MOD			0x0e00
 #define TI816X_PRM_SGX_MOD				0x0f00
+#define TI81XX_PRM_ALWON_MOD			0x1800
 
 /* 24XX register bits shared between CM & PRM registers */
 

arch/arm/mach-omap2/prcm44xx.h

@@ -38,6 +38,11 @@
 #define OMAP54XX_SCRM_PARTITION			4
 #define OMAP54XX_PRCM_MPU_PARTITION		5
 
+#define DRA7XX_PRM_PARTITION                   1
+#define DRA7XX_CM_CORE_AON_PARTITION           2
+#define DRA7XX_CM_CORE_PARTITION               3
+#define DRA7XX_MPU_PRCM_PARTITION              5
+
 /*
  * OMAP4_MAX_PRCM_PARTITIONS: set to the highest value of the PRCM partition
  * IDs, plus one

arch/arm/mach-omap2/prcm_mpu7xx.h

+/*
+ * DRA7xx PRCM MPU instance offset macros
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com
+ *
+ * Generated by code originally written by:
+ * Paul Walmsley (paul@pwsan.com)
+ * Rajendra Nayak (rnayak@ti.com)
+ * Benoit Cousson (b-cousson@ti.com)
+ *
+ * This file is automatically generated from the OMAP hardware databases.
+ * We respectfully ask that any modifications to this file be coordinated
+ * with the public linux-omap@vger.kernel.org mailing list and the
+ * authors above to ensure that the autogeneration scripts are kept
+ * up-to-date with the file contents.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_PRCM_MPU7XX_H
+#define __ARCH_ARM_MACH_OMAP2_PRCM_MPU7XX_H
+
+#include "prcm_mpu_44xx_54xx.h"
+
+#define DRA7XX_PRCM_MPU_BASE			0x48243000
+
+#define DRA7XX_PRCM_MPU_REGADDR(inst, reg)				\
+	OMAP2_L4_IO_ADDRESS(DRA7XX_PRCM_MPU_BASE + (inst) + (reg))
+
+/* MPU_PRCM instances */
+#define DRA7XX_MPU_PRCM_OCP_SOCKET_INST	0x0000
+#define DRA7XX_MPU_PRCM_DEVICE_INST	0x0200
+#define DRA7XX_MPU_PRCM_PRM_C0_INST	0x0400
+#define DRA7XX_MPU_PRCM_CM_C0_INST	0x0600
+#define DRA7XX_MPU_PRCM_PRM_C1_INST	0x0800
+#define DRA7XX_MPU_PRCM_CM_C1_INST	0x0a00
+
+/* PRCM_MPU clockdomain register offsets (from instance start) */
+#define DRA7XX_MPU_PRCM_CM_C0_CPU0_CDOFFS	0x0000
+#define DRA7XX_MPU_PRCM_CM_C1_CPU1_CDOFFS	0x0000
+
+
+/* MPU_PRCM */
+
+/* MPU_PRCM.PRCM_MPU_OCP_SOCKET register offsets */
+#define DRA7XX_REVISION_PRCM_MPU_OFFSET				0x0000
+
+/* MPU_PRCM.PRCM_MPU_DEVICE register offsets */
+#define DRA7XX_PRM_FRAC_INCREMENTER_NUMERATOR_OFFSET		0x0010
+#define DRA7XX_PRM_FRAC_INCREMENTER_DENUMERATOR_RELOAD_OFFSET	0x0014
+
+/* MPU_PRCM.PRCM_MPU_PRM_C0 register offsets */
+#define DRA7XX_PM_CPU0_PWRSTCTRL_OFFSET				0x0000
+#define DRA7XX_PM_CPU0_PWRSTST_OFFSET				0x0004
+#define DRA7XX_RM_CPU0_CPU0_RSTCTRL_OFFSET			0x0010
+#define DRA7XX_RM_CPU0_CPU0_RSTST_OFFSET			0x0014
+#define DRA7XX_RM_CPU0_CPU0_CONTEXT_OFFSET			0x0024
+
+/* MPU_PRCM.PRCM_MPU_CM_C0 register offsets */
+#define DRA7XX_CM_CPU0_CLKSTCTRL_OFFSET				0x0000
+#define DRA7XX_CM_CPU0_CPU0_CLKCTRL_OFFSET			0x0020
+#define DRA7XX_CM_CPU0_CPU0_CLKCTRL				DRA7XX_MPU_PRCM_REGADDR(DRA7XX_MPU_PRCM_CM_C0_INST, 0x0020)
+
+/* MPU_PRCM.PRCM_MPU_PRM_C1 register offsets */
+#define DRA7XX_PM_CPU1_PWRSTCTRL_OFFSET				0x0000
+#define DRA7XX_PM_CPU1_PWRSTST_OFFSET				0x0004
+#define DRA7XX_RM_CPU1_CPU1_RSTCTRL_OFFSET			0x0010
+#define DRA7XX_RM_CPU1_CPU1_RSTST_OFFSET			0x0014
+#define DRA7XX_RM_CPU1_CPU1_CONTEXT_OFFSET			0x0024
+
+/* MPU_PRCM.PRCM_MPU_CM_C1 register offsets */
+#define DRA7XX_CM_CPU1_CLKSTCTRL_OFFSET				0x0000
+#define DRA7XX_CM_CPU1_CPU1_CLKCTRL_OFFSET			0x0020
+#define DRA7XX_CM_CPU1_CPU1_CLKCTRL				DRA7XX_MPU_PRCM_REGADDR(DRA7XX_MPU_PRCM_CM_C1_INST, 0x0020)
+
+#endif

arch/arm/mach-omap2/prm44xx.c

@@ -620,6 +620,15 @@ static int omap4_pwrdm_wait_transition(struct powerdomain *pwrdm)
 	return 0;
 }
 
+static int omap4_check_vcvp(void)
+{
+	/* No VC/VP on dra7xx devices */
+	if (soc_is_dra7xx())
+		return 0;
+
+	return 1;
+}
+
 struct pwrdm_ops omap4_pwrdm_operations = {
 	.pwrdm_set_next_pwrst	= omap4_pwrdm_set_next_pwrst,
 	.pwrdm_read_next_pwrst	= omap4_pwrdm_read_next_pwrst,
@@ -637,6 +646,7 @@ struct pwrdm_ops omap4_pwrdm_operations = {
 	.pwrdm_set_mem_onst	= omap4_pwrdm_set_mem_onst,
 	.pwrdm_set_mem_retst	= omap4_pwrdm_set_mem_retst,
 	.pwrdm_wait_transition	= omap4_pwrdm_wait_transition,
+	.pwrdm_has_voltdm	= omap4_check_vcvp,
 };
 
 /*
@@ -650,7 +660,7 @@ static struct prm_ll_data omap44xx_prm_ll_data = {
 
 int __init omap44xx_prm_init(void)
 {
-	if (!cpu_is_omap44xx() && !soc_is_omap54xx())
+	if (!cpu_is_omap44xx() && !soc_is_omap54xx() && !soc_is_dra7xx())
 		return 0;
 
 	return prm_register(&omap44xx_prm_ll_data);

arch/arm/mach-omap2/prminst44xx.c

@@ -20,10 +20,13 @@
 #include "common.h"
 #include "prcm-common.h"
 #include "prm44xx.h"
+#include "prm54xx.h"
+#include "prm7xx.h"
 #include "prminst44xx.h"
 #include "prm-regbits-44xx.h"
 #include "prcm44xx.h"
 #include "prcm_mpu44xx.h"
+#include "soc.h"
 
 static void __iomem *_prm_bases[OMAP4_MAX_PRCM_PARTITIONS];
 
@@ -165,10 +168,19 @@ int omap4_prminst_deassert_hardreset(u8 shift, u8 part, s16 inst,
 void omap4_prminst_global_warm_sw_reset(void)
 {
 	u32 v;
-
-	v = omap4_prminst_read_inst_reg(OMAP4430_PRM_PARTITION,
-				    OMAP4430_PRM_DEVICE_INST,
-				    OMAP4_PRM_RSTCTRL_OFFSET);
+	s16 dev_inst;
+
+	if (cpu_is_omap44xx())
+		dev_inst = OMAP4430_PRM_DEVICE_INST;
+	else if (soc_is_omap54xx())
+		dev_inst = OMAP54XX_PRM_DEVICE_INST;
+	else if (soc_is_dra7xx())
+		dev_inst = DRA7XX_PRM_DEVICE_INST;
+	else
+		return;
+
+	v = omap4_prminst_read_inst_reg(OMAP4430_PRM_PARTITION, dev_inst,
+					OMAP4_PRM_RSTCTRL_OFFSET);
 	v |= OMAP4430_RST_GLOBAL_WARM_SW_MASK;
 	omap4_prminst_write_inst_reg(v, OMAP4430_PRM_PARTITION,
 				 OMAP4430_PRM_DEVICE_INST,

arch/arm/mach-ux500/board-mop500-audio.c

@@ -17,7 +17,6 @@
 #include "ste-dma40-db8500.h"
 #include "board-mop500.h"
 #include "devices-db8500.h"
-#include "pins-db8500.h"
 
 static struct stedma40_chan_cfg msp0_dma_rx = {
 	.high_priority = true,

arch/arm/mach-ux500/board-mop500-pins.c

@@ -14,7 +14,6 @@
 
 #include <asm/mach-types.h>
 
-#include "pins-db8500.h"
 #include "board-mop500.h"
 
 enum custom_pin_cfg_t {

arch/arm/mach-ux500/board-mop500.c

@@ -324,21 +324,19 @@ static struct lp55xx_platform_data __initdata lp5521_sec_data = {
        .clock_mode     = LP55XX_CLOCK_EXT,
 };
 
+/* I2C0 devices only available on the first HREF/MOP500 */
 static struct i2c_board_info __initdata mop500_i2c0_devices[] = {
 	{
 		I2C_BOARD_INFO("tc3589x", 0x42),
 		.irq		= NOMADIK_GPIO_TO_IRQ(217),
 		.platform_data  = &mop500_tc35892_data,
 	},
-	/* I2C0 devices only available prior to HREFv60 */
 	{
 		I2C_BOARD_INFO("tps61052", 0x33),
 		.platform_data  = &mop500_tps61052_data,
 	},
 };
 
-#define NUM_PRE_V60_I2C0_DEVICES 1
-
 static struct i2c_board_info __initdata mop500_i2c2_devices[] = {
 	{
 		/* lp5521 LED driver, 1st device */
@@ -356,6 +354,17 @@ static struct i2c_board_info __initdata mop500_i2c2_devices[] = {
 	},
 };
 
+static int __init mop500_i2c_board_init(void)
+{
+	if (machine_is_u8500())
+		mop500_uib_i2c_add(0, mop500_i2c0_devices,
+				   ARRAY_SIZE(mop500_i2c0_devices));
+	mop500_uib_i2c_add(2, mop500_i2c2_devices,
+			   ARRAY_SIZE(mop500_i2c2_devices));
+	return 0;
+}
+device_initcall(mop500_i2c_board_init);
+
 static void __init mop500_i2c_init(struct device *parent)
 {
 	db8500_add_i2c0(parent, NULL);
@@ -564,7 +573,6 @@ static struct platform_device *snowball_platform_devs[] __initdata = {
 static void __init mop500_init_machine(void)
 {
 	struct device *parent = NULL;
-	int i2c0_devs;
 	int i;
 
 	platform_device_register(&db8500_prcmu_device);
@@ -587,19 +595,13 @@ static void __init mop500_init_machine(void)
 	mop500_spi_init(parent);
 	mop500_audio_init(parent);
 	mop500_uart_init(parent);
-
 	u8500_cryp1_hash1_init(parent);
 
-	i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
-
-	i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs);
-	i2c_register_board_info(2, mop500_i2c2_devices,
-				ARRAY_SIZE(mop500_i2c2_devices));
-
 	/* This board has full regulator constraints */
 	regulator_has_full_constraints();
 }
 
+
 static void __init snowball_init_machine(void)
 {
 	struct device *parent = NULL;
@@ -634,7 +636,6 @@ static void __init snowball_init_machine(void)
 static void __init hrefv60_init_machine(void)
 {
 	struct device *parent = NULL;
-	int i2c0_devs;
 	int i;
 
 	platform_device_register(&db8500_prcmu_device);
@@ -663,14 +664,6 @@ static void __init hrefv60_init_machine(void)
 	mop500_audio_init(parent);
 	mop500_uart_init(parent);
 
-	i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
-
-	i2c0_devs -= NUM_PRE_V60_I2C0_DEVICES;
-
-	i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs);
-	i2c_register_board_info(2, mop500_i2c2_devices,
-				ARRAY_SIZE(mop500_i2c2_devices));
-
 	/* This board has full regulator constraints */
 	regulator_has_full_constraints();
 }

arch/arm/mach-ux500/cpu-db8500.c

@@ -156,7 +156,8 @@ static void __init db8500_add_gpios(struct device *parent)
 		.supports_sleepmode = true,
 	};
 
-	dbx500_add_gpios(parent, ARRAY_AND_SIZE(db8500_gpio_base),
+	dbx500_add_gpios(parent, db8500_gpio_base,
+			 ARRAY_SIZE(db8500_gpio_base),
 			 IRQ_DB8500_GPIO0, &pdata);
 	dbx500_add_pinctrl(parent, "pinctrl-db8500", U8500_PRCMU_BASE);
 }

arch/arm/mm/init.c

@@ -208,7 +208,7 @@ static void __init arm_bootmem_init(unsigned long start_pfn,
 
 #ifdef CONFIG_ZONE_DMA
 
-unsigned long arm_dma_zone_size __read_mostly;
+phys_addr_t arm_dma_zone_size __read_mostly;
 EXPORT_SYMBOL(arm_dma_zone_size);
 
 /*

drivers/dma/amba-pl08x.c

@@ -133,6 +133,8 @@ struct pl08x_bus_data {
 	u8 buswidth;
 };
 
+#define IS_BUS_ALIGNED(bus) IS_ALIGNED((bus)->addr, (bus)->buswidth)
+
 /**
  * struct pl08x_phy_chan - holder for the physical channels
  * @id: physical index to this channel
@@ -845,10 +847,13 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x,
 
 		pl08x_choose_master_bus(&bd, &mbus, &sbus, cctl);
 
-		dev_vdbg(&pl08x->adev->dev, "src=0x%08x%s/%u dst=0x%08x%s/%u len=%zu\n",
-			bd.srcbus.addr, cctl & PL080_CONTROL_SRC_INCR ? "+" : "",
+		dev_vdbg(&pl08x->adev->dev,
+			"src=0x%08llx%s/%u dst=0x%08llx%s/%u len=%zu\n",
+			(u64)bd.srcbus.addr,
+			cctl & PL080_CONTROL_SRC_INCR ? "+" : "",
 			bd.srcbus.buswidth,
-			bd.dstbus.addr, cctl & PL080_CONTROL_DST_INCR ? "+" : "",
+			(u64)bd.dstbus.addr,
+			cctl & PL080_CONTROL_DST_INCR ? "+" : "",
 			bd.dstbus.buswidth,
 			bd.remainder);
 		dev_vdbg(&pl08x->adev->dev, "mbus=%s sbus=%s\n",
@@ -886,8 +891,8 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x,
 				return 0;
 			}
 
-			if ((bd.srcbus.addr % bd.srcbus.buswidth) ||
-					(bd.dstbus.addr % bd.dstbus.buswidth)) {
+			if (!IS_BUS_ALIGNED(&bd.srcbus) ||
+				!IS_BUS_ALIGNED(&bd.dstbus)) {
 				dev_err(&pl08x->adev->dev,
 					"%s src & dst address must be aligned to src"
 					" & dst width if peripheral is flow controller",
@@ -908,9 +913,9 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x,
 		 */
 		if (bd.remainder < mbus->buswidth)
 			early_bytes = bd.remainder;
-		else if ((mbus->addr) % (mbus->buswidth)) {
-			early_bytes = mbus->buswidth - (mbus->addr) %
-				(mbus->buswidth);
+		else if (!IS_BUS_ALIGNED(mbus)) {
+			early_bytes = mbus->buswidth -
+				(mbus->addr & (mbus->buswidth - 1));
 			if ((bd.remainder - early_bytes) < mbus->buswidth)
 				early_bytes = bd.remainder;
 		}
@@ -928,7 +933,7 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x,
 			 * Master now aligned
 			 * - if slave is not then we must set its width down
 			 */
-			if (sbus->addr % sbus->buswidth) {
+			if (!IS_BUS_ALIGNED(sbus)) {
 				dev_dbg(&pl08x->adev->dev,
 					"%s set down bus width to one byte\n",
 					__func__);

drivers/irqchip/Makefile

@@ -2,6 +2,7 @@ obj-$(CONFIG_IRQCHIP)			+= irqchip.o
 
 obj-$(CONFIG_ARCH_BCM2835)		+= irq-bcm2835.o
 obj-$(CONFIG_ARCH_EXYNOS)		+= exynos-combiner.o
+obj-$(CONFIG_ARCH_MMP)			+= irq-mmp.o
 obj-$(CONFIG_ARCH_MVEBU)		+= irq-armada-370-xp.o
 obj-$(CONFIG_ARCH_MXS)			+= irq-mxs.o
 obj-$(CONFIG_ARCH_S3C24XX)		+= irq-s3c24xx.o

include/linux/irqchip/mmp.h

+#ifndef	__IRQCHIP_MMP_H
+#define	__IRQCHIP_MMP_H
+
+extern struct irq_chip icu_irq_chip;
+
+#endif	/* __IRQCHIP_MMP_H */