Commit 640bf060 authored by Fabio Estevam's avatar Fabio Estevam Committed by Shawn Guo

ARM: mx23: Fix registers range

Fix registers range.

Cc: stable@vger.kernel.org
Signed-off-by: default avatarFabio Estevam <fabio.estevam@freescale.com>
Acked-by: default avatarMarek Vasut <marex@denx.de>
Signed-off-by: default avatarShawn Guo <shawn.guo@linaro.org>
parent 0d7614f0
...@@ -51,11 +51,11 @@ icoll: interrupt-controller@80000000 { ...@@ -51,11 +51,11 @@ icoll: interrupt-controller@80000000 {
dma-apbh@80004000 { dma-apbh@80004000 {
compatible = "fsl,imx23-dma-apbh"; compatible = "fsl,imx23-dma-apbh";
reg = <0x80004000 2000>; reg = <0x80004000 0x2000>;
}; };
ecc@80008000 { ecc@80008000 {
reg = <0x80008000 2000>; reg = <0x80008000 0x2000>;
status = "disabled"; status = "disabled";
}; };
...@@ -63,7 +63,7 @@ gpmi-nand@8000c000 { ...@@ -63,7 +63,7 @@ gpmi-nand@8000c000 {
compatible = "fsl,imx23-gpmi-nand"; compatible = "fsl,imx23-gpmi-nand";
#address-cells = <1>; #address-cells = <1>;
#size-cells = <1>; #size-cells = <1>;
reg = <0x8000c000 2000>, <0x8000a000 2000>; reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>;
reg-names = "gpmi-nand", "bch"; reg-names = "gpmi-nand", "bch";
interrupts = <13>, <56>; interrupts = <13>, <56>;
interrupt-names = "gpmi-dma", "bch"; interrupt-names = "gpmi-dma", "bch";
...@@ -72,14 +72,14 @@ gpmi-nand@8000c000 { ...@@ -72,14 +72,14 @@ gpmi-nand@8000c000 {
}; };
ssp0: ssp@80010000 { ssp0: ssp@80010000 {
reg = <0x80010000 2000>; reg = <0x80010000 0x2000>;
interrupts = <15 14>; interrupts = <15 14>;
fsl,ssp-dma-channel = <1>; fsl,ssp-dma-channel = <1>;
status = "disabled"; status = "disabled";
}; };
etm@80014000 { etm@80014000 {
reg = <0x80014000 2000>; reg = <0x80014000 0x2000>;
status = "disabled"; status = "disabled";
}; };
...@@ -87,7 +87,7 @@ pinctrl@80018000 { ...@@ -87,7 +87,7 @@ pinctrl@80018000 {
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
compatible = "fsl,imx23-pinctrl", "simple-bus"; compatible = "fsl,imx23-pinctrl", "simple-bus";
reg = <0x80018000 2000>; reg = <0x80018000 0x2000>;
gpio0: gpio@0 { gpio0: gpio@0 {
compatible = "fsl,imx23-gpio", "fsl,mxs-gpio"; compatible = "fsl,imx23-gpio", "fsl,mxs-gpio";
...@@ -273,32 +273,32 @@ digctl@8001c000 { ...@@ -273,32 +273,32 @@ digctl@8001c000 {
}; };
emi@80020000 { emi@80020000 {
reg = <0x80020000 2000>; reg = <0x80020000 0x2000>;
status = "disabled"; status = "disabled";
}; };
dma-apbx@80024000 { dma-apbx@80024000 {
compatible = "fsl,imx23-dma-apbx"; compatible = "fsl,imx23-dma-apbx";
reg = <0x80024000 2000>; reg = <0x80024000 0x2000>;
}; };
dcp@80028000 { dcp@80028000 {
reg = <0x80028000 2000>; reg = <0x80028000 0x2000>;
status = "disabled"; status = "disabled";
}; };
pxp@8002a000 { pxp@8002a000 {
reg = <0x8002a000 2000>; reg = <0x8002a000 0x2000>;
status = "disabled"; status = "disabled";
}; };
ocotp@8002c000 { ocotp@8002c000 {
reg = <0x8002c000 2000>; reg = <0x8002c000 0x2000>;
status = "disabled"; status = "disabled";
}; };
axi-ahb@8002e000 { axi-ahb@8002e000 {
reg = <0x8002e000 2000>; reg = <0x8002e000 0x2000>;
status = "disabled"; status = "disabled";
}; };
...@@ -310,14 +310,14 @@ lcdif@80030000 { ...@@ -310,14 +310,14 @@ lcdif@80030000 {
}; };
ssp1: ssp@80034000 { ssp1: ssp@80034000 {
reg = <0x80034000 2000>; reg = <0x80034000 0x2000>;
interrupts = <2 20>; interrupts = <2 20>;
fsl,ssp-dma-channel = <2>; fsl,ssp-dma-channel = <2>;
status = "disabled"; status = "disabled";
}; };
tvenc@80038000 { tvenc@80038000 {
reg = <0x80038000 2000>; reg = <0x80038000 0x2000>;
status = "disabled"; status = "disabled";
}; };
}; };
...@@ -330,37 +330,37 @@ apbx@80040000 { ...@@ -330,37 +330,37 @@ apbx@80040000 {
ranges; ranges;
clkctl@80040000 { clkctl@80040000 {
reg = <0x80040000 2000>; reg = <0x80040000 0x2000>;
status = "disabled"; status = "disabled";
}; };
saif0: saif@80042000 { saif0: saif@80042000 {
reg = <0x80042000 2000>; reg = <0x80042000 0x2000>;
status = "disabled"; status = "disabled";
}; };
power@80044000 { power@80044000 {
reg = <0x80044000 2000>; reg = <0x80044000 0x2000>;
status = "disabled"; status = "disabled";
}; };
saif1: saif@80046000 { saif1: saif@80046000 {
reg = <0x80046000 2000>; reg = <0x80046000 0x2000>;
status = "disabled"; status = "disabled";
}; };
audio-out@80048000 { audio-out@80048000 {
reg = <0x80048000 2000>; reg = <0x80048000 0x2000>;
status = "disabled"; status = "disabled";
}; };
audio-in@8004c000 { audio-in@8004c000 {
reg = <0x8004c000 2000>; reg = <0x8004c000 0x2000>;
status = "disabled"; status = "disabled";
}; };
lradc@80050000 { lradc@80050000 {
reg = <0x80050000 2000>; reg = <0x80050000 0x2000>;
status = "disabled"; status = "disabled";
}; };
...@@ -370,26 +370,26 @@ spdif@80054000 { ...@@ -370,26 +370,26 @@ spdif@80054000 {
}; };
i2c@80058000 { i2c@80058000 {
reg = <0x80058000 2000>; reg = <0x80058000 0x2000>;
status = "disabled"; status = "disabled";
}; };
rtc@8005c000 { rtc@8005c000 {
compatible = "fsl,imx23-rtc", "fsl,stmp3xxx-rtc"; compatible = "fsl,imx23-rtc", "fsl,stmp3xxx-rtc";
reg = <0x8005c000 2000>; reg = <0x8005c000 0x2000>;
interrupts = <22>; interrupts = <22>;
}; };
pwm: pwm@80064000 { pwm: pwm@80064000 {
compatible = "fsl,imx23-pwm"; compatible = "fsl,imx23-pwm";
reg = <0x80064000 2000>; reg = <0x80064000 0x2000>;
#pwm-cells = <2>; #pwm-cells = <2>;
fsl,pwm-number = <5>; fsl,pwm-number = <5>;
status = "disabled"; status = "disabled";
}; };
timrot@80068000 { timrot@80068000 {
reg = <0x80068000 2000>; reg = <0x80068000 0x2000>;
status = "disabled"; status = "disabled";
}; };
...@@ -429,7 +429,7 @@ ahb@80080000 { ...@@ -429,7 +429,7 @@ ahb@80080000 {
ranges; ranges;
usbctrl@80080000 { usbctrl@80080000 {
reg = <0x80080000 0x10000>; reg = <0x80080000 0x40000>;
status = "disabled"; status = "disabled";
}; };
}; };
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment