Merge bk://linux-acpi.bkbits.net/linux-acpi-release-2.6.5

into ppc970.osdl.org:/home/torvalds/v2.6/linux

arch/i386/kernel/acpi/boot.c

@@ -67,6 +67,10 @@ int acpi_sci_override_gsi __initdata;
 static u64 acpi_lapic_addr __initdata = APIC_DEFAULT_PHYS_BASE;
 #endif
 
+#ifndef __HAVE_ARCH_CMPXCHG
+#warning ACPI uses CMPXCHG, i486 and later hardware
+#endif
+
 /* --------------------------------------------------------------------------
                               Boot-time Configuration
    -------------------------------------------------------------------------- */

arch/i386/kernel/io_apic.c

@@ -2440,7 +2440,11 @@ int io_apic_set_pci_routing (int ioapic, int pin, int irq, int edge_level, int a
 	entry.polarity = active_high_low;
 	entry.mask  = 1;
 
-	add_pin_to_irq(irq, ioapic, pin);
+	/*
+	 * IRQs < 16 are already in the irq_2_pin[] map
+	 */
+	if (irq >= 16)
+		add_pin_to_irq(irq, ioapic, pin);
 
 	entry.vector = assign_irq_vector(irq);
 

arch/x86_64/kernel/io_apic.c

@@ -1891,7 +1891,11 @@ int io_apic_set_pci_routing (int ioapic, int pin, int irq, int edge_level, int a
 	entry.polarity = active_high_low;
 	entry.mask = 1;					 /* Disabled (masked) */
 
-	add_pin_to_irq(irq, ioapic, pin);
+	/*
+	 * IRQs < 16 are already in the irq_2_pin[] map
+	 */
+	if (irq >= 16)
+		add_pin_to_irq(irq, ioapic, pin);
 
 	entry.vector = assign_irq_vector(irq);
 

drivers/acpi/bus.c

@@ -615,6 +615,11 @@ acpi_bus_init (void)
 #ifdef CONFIG_X86
 	if (!acpi_ioapic) {
 		extern acpi_interrupt_flags acpi_sci_flags;
+
+		/* compatible (0) means level (3) */
+		if (acpi_sci_flags.trigger == 0)
+			acpi_sci_flags.trigger = 3;
+
 		/* Set PIC-mode SCI trigger type */
 		acpi_pic_sci_set_trigger(acpi_fadt.sci_int, acpi_sci_flags.trigger);
 	} else {

drivers/acpi/pci_irq.c

@@ -273,11 +273,6 @@ acpi_pci_irq_lookup (struct pci_bus *bus, int device, int pin)
 	return_VALUE(entry->irq);
 }
 
-/*
- * current thinking is that acpi_pci_irq_derive() adds no value
- * and should be deleted, so warn if it actually does something.
- */
-
 static int
 acpi_pci_irq_derive (
 	struct pci_dev		*dev,
@@ -285,6 +280,7 @@ acpi_pci_irq_derive (
 {
 	struct pci_dev		*bridge = dev;
 	int			irq = 0;
+	u8			bridge_pin = 0;
 
 	ACPI_FUNCTION_TRACE("acpi_pci_irq_derive");
 
@@ -293,11 +289,25 @@ acpi_pci_irq_derive (
 
 	/* 
 	 * Attempt to derive an IRQ for this device from a parent bridge's
-	 * PCI interrupt routing entry (a.k.a. the "bridge swizzle").
+	 * PCI interrupt routing entry (eg. yenta bridge and add-in card bridge).
 	 */
 	while (!irq && bridge->bus->self) {
 		pin = (pin + PCI_SLOT(bridge->devfn)) % 4;
 		bridge = bridge->bus->self;
+
+		if ((bridge->class >> 8) == PCI_CLASS_BRIDGE_CARDBUS) {
+			/* PC card has the same IRQ as its cardbridge */
+			pci_read_config_byte(bridge, PCI_INTERRUPT_PIN, &bridge_pin);
+			if (!bridge_pin) {
+				ACPI_DEBUG_PRINT((ACPI_DB_INFO, 
+					"No interrupt pin configured for device %s\n", pci_name(bridge)));
+				return_VALUE(0);
+			}
+			/* Pin is from 0 to 3 */
+			bridge_pin --;
+			pin = bridge_pin;
+		}
+
 		irq = acpi_pci_irq_lookup(bridge->bus,
 				PCI_SLOT(bridge->devfn), pin);
 	}
@@ -307,7 +317,7 @@ acpi_pci_irq_derive (
 		return_VALUE(0);
 	}
 
-	ACPI_DEBUG_PRINT((ACPI_DB_WARN, "Derive IRQ %d for device %s from %s\n",
+	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Derive IRQ %d for device %s from %s\n",
 		irq, pci_name(dev), pci_name(bridge)));
 
 	return_VALUE(irq);
@@ -344,13 +354,6 @@ acpi_pci_irq_enable (
 	 */
  	irq = acpi_pci_irq_lookup(dev->bus, PCI_SLOT(dev->devfn), pin);
 
-	/*
-	 * Check if the device has an IRQ,
-	 * Hotplug devices may get IRQs by scanning
-	 */
-	if (!irq && dev->irq)
-		irq = dev->irq;
- 
 	/*
 	 * If no PRT entry was found, we'll try to derive an IRQ from the
 	 * device's parent bridge.

include/asm-i386/acpi.h

@@ -54,15 +54,6 @@
 #define ACPI_ENABLE_IRQS()  local_irq_enable()
 #define ACPI_FLUSH_CPU_CACHE()	wbinvd()
 
-/*
- * A brief explanation as GNU inline assembly is a bit hairy
- *  %0 is the output parameter in EAX ("=a")
- *  %1 and %2 are the input parameters in ECX ("c")
- *  and an immediate value ("i") respectively
- *  All actual register references are preceded with "%%" as in "%%edx"
- *  Immediate values in the assembly are preceded by "$" as in "$0x1"
- *  The final asm parameter are the operation altered non-output registers.
- */
 
 static inline int
 __acpi_acquire_global_lock (unsigned int *lock)

include/asm-i386/system.h

@@ -241,6 +241,7 @@ static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int siz
 
 #ifdef CONFIG_X86_CMPXCHG
 #define __HAVE_ARCH_CMPXCHG 1
+#endif
 
 static inline unsigned long __cmpxchg(volatile void *ptr, unsigned long old,
 				      unsigned long new, int size)
@@ -273,10 +274,6 @@ static inline unsigned long __cmpxchg(volatile void *ptr, unsigned long old,
 	((__typeof__(*(ptr)))__cmpxchg((ptr),(unsigned long)(o),\
 					(unsigned long)(n),sizeof(*(ptr))))
     
-#else
-/* Compiling for a 386 proper.	Is it worth implementing via cli/sti?  */
-#endif
-
 #ifdef __KERNEL__
 struct alt_instr { 
 	__u8 *instr; 		/* original instruction */