Commit 64987fc5 authored by Sonika Jindal's avatar Sonika Jindal Committed by Jani Nikula

drm/i915/bxt: edp1.4 Intermediate Freq support

BXT supports following intermediate link rates for edp:
2.16GHz, 2.43GHz, 3.24GHz, 4.32GHz.
Adding support for programming the intermediate rates.

v2: Adding clock in bxt_clk_div struct and then look for the entry with
required rate (Ville)
v3: 'clock' has the selected value, no need to use link_bw or rate_select
for selecting pll(Ville)
v4: Make bxt_dp_clk_val const and remove size (Ville)
v5: Rebased
v6: Removed setting of vco while rebasing in v5, adding it back
Signed-off-by: default avatarSonika Jindal <sonika.jindal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> (v4)
Reviewed-by: default avatarVandana Kannan <vandana.kannan@intel.com>
Signed-off-by: default avatarJani Nikula <jani.nikula@intel.com>
parent 5b6fd12a
......@@ -1348,6 +1348,7 @@ skl_ddi_pll_select(struct intel_crtc *intel_crtc,
/* bxt clock parameters */
struct bxt_clk_div {
int clock;
uint32_t p1;
uint32_t p2;
uint32_t m2_int;
......@@ -1357,14 +1358,14 @@ struct bxt_clk_div {
};
/* pre-calculated values for DP linkrates */
static struct bxt_clk_div bxt_dp_clk_val[7] = {
/* 162 */ {4, 2, 32, 1677722, 1, 1},
/* 270 */ {4, 1, 27, 0, 0, 1},
/* 540 */ {2, 1, 27, 0, 0, 1},
/* 216 */ {3, 2, 32, 1677722, 1, 1},
/* 243 */ {4, 1, 24, 1258291, 1, 1},
/* 324 */ {4, 1, 32, 1677722, 1, 1},
/* 432 */ {3, 1, 32, 1677722, 1, 1}
static const struct bxt_clk_div bxt_dp_clk_val[] = {
{162000, 4, 2, 32, 1677722, 1, 1},
{270000, 4, 1, 27, 0, 0, 1},
{540000, 2, 1, 27, 0, 0, 1},
{216000, 3, 2, 32, 1677722, 1, 1},
{243000, 4, 1, 24, 1258291, 1, 1},
{324000, 4, 1, 32, 1677722, 1, 1},
{432000, 3, 1, 32, 1677722, 1, 1}
};
static bool
......@@ -1404,22 +1405,14 @@ bxt_ddi_pll_select(struct intel_crtc *intel_crtc,
vco = best_clock.vco;
} else if (intel_encoder->type == INTEL_OUTPUT_DISPLAYPORT ||
intel_encoder->type == INTEL_OUTPUT_EDP) {
struct drm_encoder *encoder = &intel_encoder->base;
struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
int i;
switch (intel_dp->link_bw) {
case DP_LINK_BW_1_62:
clk_div = bxt_dp_clk_val[0];
break;
case DP_LINK_BW_2_7:
clk_div = bxt_dp_clk_val[1];
break;
case DP_LINK_BW_5_4:
clk_div = bxt_dp_clk_val[2];
break;
default:
clk_div = bxt_dp_clk_val[0];
DRM_ERROR("Unknown link rate\n");
clk_div = bxt_dp_clk_val[0];
for (i = 0; i < ARRAY_SIZE(bxt_dp_clk_val); ++i) {
if (bxt_dp_clk_val[i].clock == clock) {
clk_div = bxt_dp_clk_val[i];
break;
}
}
vco = clock * 10 / 2 * clk_div.p1 * clk_div.p2;
}
......
......@@ -91,6 +91,8 @@ static const struct dp_link_dpll chv_dpll[] = {
{ .p1 = 2, .p2 = 1, .n = 1, .m1 = 2, .m2 = 0x6c00000 } }
};
static const int bxt_rates[] = { 162000, 216000, 243000, 270000,
324000, 432000, 540000 };
static const int skl_rates[] = { 162000, 216000, 270000,
324000, 432000, 540000 };
static const int chv_rates[] = { 162000, 202500, 210000, 216000,
......@@ -1170,7 +1172,10 @@ intel_dp_sink_rates(struct intel_dp *intel_dp, const int **sink_rates)
static int
intel_dp_source_rates(struct drm_device *dev, const int **source_rates)
{
if (IS_SKYLAKE(dev)) {
if (IS_BROXTON(dev)) {
*source_rates = bxt_rates;
return ARRAY_SIZE(bxt_rates);
} else if (IS_SKYLAKE(dev)) {
*source_rates = skl_rates;
return ARRAY_SIZE(skl_rates);
} else if (IS_CHERRYVIEW(dev)) {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment