Commit 649c8e02 authored by Dale Farnsworth's avatar Dale Farnsworth Committed by Paul Mackerras

[POWERPC] Create Marvell mv64x60 ethernet platform_data

This patch creates platform_device entries for the Marvell mv64x60
ethernet controller ports, based on information contained in the
device tree.

This driver (like the other mv64x60 drivers) are unusual in that it
works on both the MIPS and PowerPC architectures.  Because of that,
the drivers do not support the normal PowerPC of_platform_bus_type.
They support platform_bus_type instead.
Signed-off-by: default avatarDale Farnsworth <dale@farnsworth.org>
Acked-by: default avatarArnd Bergmann <arnd@arndb.de>
Signed-off-by: default avatarPaul Mackerras <paulus@samba.org>
parent 52d3aff9
......@@ -201,6 +201,128 @@ static int __init mv64x60_mpsc_device_setup(struct device_node *np, int id)
return err;
}
/*
* Create mv64x60_eth platform devices
*/
static int __init eth_register_shared_pdev(struct device_node *np)
{
struct platform_device *pdev;
struct resource r[1];
int err;
np = of_get_parent(np);
if (!np)
return -ENODEV;
err = of_address_to_resource(np, 0, &r[0]);
of_node_put(np);
if (err)
return err;
pdev = platform_device_register_simple(MV643XX_ETH_SHARED_NAME, 0,
r, 1);
if (IS_ERR(pdev))
return PTR_ERR(pdev);
return 0;
}
static int __init mv64x60_eth_device_setup(struct device_node *np, int id)
{
struct resource r[1];
struct mv643xx_eth_platform_data pdata;
struct platform_device *pdev;
struct device_node *phy;
const u8 *mac_addr;
const int *prop;
const phandle *ph;
int err;
/* only register the shared platform device the first time through */
if (id == 0 && (err = eth_register_shared_pdev(np)))
return err;;
memset(r, 0, sizeof(r));
of_irq_to_resource(np, 0, &r[0]);
memset(&pdata, 0, sizeof(pdata));
prop = of_get_property(np, "block-index", NULL);
if (!prop)
return -ENODEV;
pdata.port_number = *prop;
mac_addr = of_get_mac_address(np);
if (mac_addr)
memcpy(pdata.mac_addr, mac_addr, 6);
prop = of_get_property(np, "speed", NULL);
if (prop)
pdata.speed = *prop;
prop = of_get_property(np, "tx_queue_size", NULL);
if (prop)
pdata.tx_queue_size = *prop;
prop = of_get_property(np, "rx_queue_size", NULL);
if (prop)
pdata.rx_queue_size = *prop;
prop = of_get_property(np, "tx_sram_addr", NULL);
if (prop)
pdata.tx_sram_addr = *prop;
prop = of_get_property(np, "tx_sram_size", NULL);
if (prop)
pdata.tx_sram_size = *prop;
prop = of_get_property(np, "rx_sram_addr", NULL);
if (prop)
pdata.rx_sram_addr = *prop;
prop = of_get_property(np, "rx_sram_size", NULL);
if (prop)
pdata.rx_sram_size = *prop;
ph = of_get_property(np, "phy", NULL);
if (!ph)
return -ENODEV;
phy = of_find_node_by_phandle(*ph);
if (phy == NULL)
return -ENODEV;
prop = of_get_property(phy, "reg", NULL);
if (prop) {
pdata.force_phy_addr = 1;
pdata.phy_addr = *prop;
}
of_node_put(phy);
pdev = platform_device_alloc(MV643XX_ETH_NAME, pdata.port_number);
if (!pdev)
return -ENOMEM;
err = platform_device_add_resources(pdev, r, 1);
if (err)
goto error;
err = platform_device_add_data(pdev, &pdata, sizeof(pdata));
if (err)
goto error;
err = platform_device_add(pdev);
if (err)
goto error;
return 0;
error:
platform_device_put(pdev);
return err;
}
static int __init mv64x60_device_setup(void)
{
struct device_node *np = NULL;
......@@ -212,6 +334,13 @@ static int __init mv64x60_device_setup(void)
if ((err = mv64x60_mpsc_device_setup(np, id)))
goto error;
for (id = 0;
(np = of_find_compatible_node(np, "network",
"marvell,mv64x60-eth"));
id++)
if ((err = mv64x60_eth_device_setup(np, id)))
goto error;
return 0;
error:
......
......@@ -2299,7 +2299,7 @@ config UGETH_TX_ON_DEMAND
config MV643XX_ETH
tristate "MV-643XX Ethernet support"
depends on MOMENCO_OCELOT_C || MOMENCO_JAGUAR_ATX || MV64360 || MOMENCO_OCELOT_3 || (PPC_MULTIPLATFORM && PPC32)
depends on MOMENCO_OCELOT_C || MOMENCO_JAGUAR_ATX || MV64360 || MV64X60 || MOMENCO_OCELOT_3 || (PPC_MULTIPLATFORM && PPC32)
select MII
help
This driver supports the gigabit Ethernet on the Marvell MV643XX
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment