Commit 6607fac8 authored by Roger Quadros's avatar Roger Quadros Committed by Tony Lindgren

ARM: dts: dm8168-evm: ARM: dts: Disable wait pin monitoring for NAND

The NAND Ready/Busy# line is connected to GPMC_WAIT0 pin and
can't be used for wait state insertion for NAND I/O read/write.
So disable read/write wait monitoring as per Reference Manual's
suggestion [1].

[1] dm816x TRM: SPRUGX8C: 9.2.4.12.2 NAND Device-Ready Pin
Signed-off-by: default avatarRoger Quadros <rogerq@ti.com>
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
parent 6d840d85
...@@ -111,12 +111,9 @@ nand@0,0 { ...@@ -111,12 +111,9 @@ nand@0,0 {
gpmc,access-ns = <64>; gpmc,access-ns = <64>;
gpmc,rd-cycle-ns = <82>; gpmc,rd-cycle-ns = <82>;
gpmc,wr-cycle-ns = <82>; gpmc,wr-cycle-ns = <82>;
gpmc,wait-on-read = "true";
gpmc,wait-on-write = "true";
gpmc,bus-turnaround-ns = <0>; gpmc,bus-turnaround-ns = <0>;
gpmc,cycle2cycle-delay-ns = <0>; gpmc,cycle2cycle-delay-ns = <0>;
gpmc,clk-activation-ns = <0>; gpmc,clk-activation-ns = <0>;
gpmc,wait-monitoring-ns = <0>;
gpmc,wr-access-ns = <40>; gpmc,wr-access-ns = <40>;
gpmc,wr-data-mux-bus-ns = <0>; gpmc,wr-data-mux-bus-ns = <0>;
partition@0 { partition@0 {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment