Commit 662d5c95 authored by Dave Airlie's avatar Dave Airlie

Merge tag 'tilcdc-4.9-3.1' of https://github.com/jsarha/linux into drm-next

Second attempt for 3rd drm/tilcdc pull request for v4.9.

* tag 'tilcdc-4.9-3.1' of https://github.com/jsarha/linux:
  drm/tilcdc: fix wrong error handling
  drm/tilcdc: Return directly after a failed kfree_table_init() in tilcdc_convert_slave_node()
  drm/tilcdc: Remove "default" from blue-and-red-wiring property binding
  drm/tilcdc: Fix non static symbol warning
  drm/tilcdc: mark symbols static where possible
  drm/tilcdc: add missing header dependencies
  drm/tilcdc: WARN if CRTC is touched without CRTC lock
  drm/tilcdc: Take CRTC lock when calling tilcdc_crtc_disable()
  drm/tilcdc: Remove unnecessary tilcdc_crtc_disable() from tilcdc_unload()
  drm/tilcdc: Flush flip-work workqueue before drm_flip_work_cleanup()
  drm/tilcdc: Clean up LCDC functional clock rate setting code
  drm/tilcdc: Take crtc modeset lock while updating the crtc clock rate
parents f01ebbdb 7b993855
......@@ -17,9 +17,9 @@ Optional properties:
the lcd controller.
- max-pixelclock: The maximum pixel clock that can be supported
by the lcd controller in KHz.
- blue-and-red-wiring: Recognized values "default", "straight" or
"crossed". This property deals with the LCDC revision 2 (found on
AM335x) color errata [1].
- blue-and-red-wiring: Recognized values "straight" or "crossed".
This property deals with the LCDC revision 2 (found on AM335x)
color errata [1].
- "straight" indicates normal wiring that supports RGB565,
BGR888, and XBGR8888 color formats.
- "crossed" indicates wiring that has blue and red wires
......
......@@ -20,6 +20,7 @@
#include <drm/drm_crtc.h>
#include <drm/drm_flip_work.h>
#include <drm/drm_plane_helper.h>
#include <linux/workqueue.h>
#include "tilcdc_drv.h"
#include "tilcdc_regs.h"
......@@ -37,6 +38,8 @@ struct tilcdc_crtc {
bool frame_done;
spinlock_t irq_lock;
unsigned int lcd_fck_rate;
ktime_t last_vblank;
struct drm_framebuffer *curr_fb;
......@@ -152,6 +155,8 @@ static void tilcdc_crtc_enable(struct drm_crtc *crtc)
struct drm_device *dev = crtc->dev;
struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
WARN_ON(!drm_modeset_is_locked(&crtc->mutex));
if (tilcdc_crtc->enabled)
return;
......@@ -176,6 +181,8 @@ void tilcdc_crtc_disable(struct drm_crtc *crtc)
struct drm_device *dev = crtc->dev;
struct tilcdc_drm_private *priv = dev->dev_private;
WARN_ON(!drm_modeset_is_locked(&crtc->mutex));
if (!tilcdc_crtc->enabled)
return;
......@@ -227,8 +234,13 @@ static bool tilcdc_crtc_is_on(struct drm_crtc *crtc)
static void tilcdc_crtc_destroy(struct drm_crtc *crtc)
{
struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
struct tilcdc_drm_private *priv = crtc->dev->dev_private;
drm_modeset_lock_crtc(crtc, NULL);
tilcdc_crtc_disable(crtc);
drm_modeset_unlock_crtc(crtc);
flush_workqueue(priv->wq);
of_node_put(crtc->port);
drm_crtc_cleanup(crtc);
......@@ -243,6 +255,8 @@ int tilcdc_crtc_update_fb(struct drm_crtc *crtc,
struct drm_device *dev = crtc->dev;
unsigned long flags;
WARN_ON(!drm_modeset_is_locked(&crtc->mutex));
if (tilcdc_crtc->event) {
dev_err(dev->dev, "already pending page flip!\n");
return -EBUSY;
......@@ -306,6 +320,37 @@ static bool tilcdc_crtc_mode_fixup(struct drm_crtc *crtc,
return true;
}
static void tilcdc_crtc_set_clk(struct drm_crtc *crtc)
{
struct drm_device *dev = crtc->dev;
struct tilcdc_drm_private *priv = dev->dev_private;
struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
const unsigned clkdiv = 2; /* using a fixed divider of 2 */
int ret;
/* mode.clock is in KHz, set_rate wants parameter in Hz */
ret = clk_set_rate(priv->clk, crtc->mode.clock * 1000 * clkdiv);
if (ret < 0) {
dev_err(dev->dev, "failed to set display clock rate to: %d\n",
crtc->mode.clock);
return;
}
tilcdc_crtc->lcd_fck_rate = clk_get_rate(priv->clk);
DBG("lcd_clk=%u, mode clock=%d, div=%u",
tilcdc_crtc->lcd_fck_rate, crtc->mode.clock, clkdiv);
/* Configure the LCD clock divisor. */
tilcdc_write(dev, LCDC_CTRL_REG, LCDC_CLK_DIVISOR(clkdiv) |
LCDC_RASTER_MODE);
if (priv->rev == 2)
tilcdc_set(dev, LCDC_CLK_ENABLE_REG,
LCDC_V2_DMA_CLK_EN | LCDC_V2_LIDD_CLK_EN |
LCDC_V2_CORE_CLK_EN);
}
static void tilcdc_crtc_mode_set_nofb(struct drm_crtc *crtc)
{
struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
......@@ -316,6 +361,8 @@ static void tilcdc_crtc_mode_set_nofb(struct drm_crtc *crtc)
struct drm_display_mode *mode = &crtc->state->adjusted_mode;
struct drm_framebuffer *fb = crtc->primary->state->fb;
WARN_ON(!drm_modeset_is_locked(&crtc->mutex));
if (WARN_ON(!info))
return;
......@@ -468,7 +515,7 @@ static void tilcdc_crtc_mode_set_nofb(struct drm_crtc *crtc)
set_scanout(crtc, fb);
tilcdc_crtc_update_clk(crtc);
tilcdc_crtc_set_clk(crtc);
crtc->hwmode = crtc->state->adjusted_mode;
}
......@@ -637,41 +684,21 @@ void tilcdc_crtc_update_clk(struct drm_crtc *crtc)
{
struct drm_device *dev = crtc->dev;
struct tilcdc_drm_private *priv = dev->dev_private;
unsigned long lcd_clk;
const unsigned clkdiv = 2; /* using a fixed divider of 2 */
int ret;
struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
pm_runtime_get_sync(dev->dev);
drm_modeset_lock_crtc(crtc, NULL);
if (tilcdc_crtc->lcd_fck_rate != clk_get_rate(priv->clk)) {
if (tilcdc_crtc_is_on(crtc)) {
pm_runtime_get_sync(dev->dev);
tilcdc_crtc_disable(crtc);
tilcdc_crtc_disable(crtc);
tilcdc_crtc_set_clk(crtc);
/* mode.clock is in KHz, set_rate wants parameter in Hz */
ret = clk_set_rate(priv->clk, crtc->mode.clock * 1000 * clkdiv);
if (ret < 0) {
dev_err(dev->dev, "failed to set display clock rate to: %d\n",
crtc->mode.clock);
goto out;
tilcdc_crtc_enable(crtc);
pm_runtime_put_sync(dev->dev);
}
}
lcd_clk = clk_get_rate(priv->clk);
DBG("lcd_clk=%lu, mode clock=%d, div=%u",
lcd_clk, crtc->mode.clock, clkdiv);
/* Configure the LCD clock divisor. */
tilcdc_write(dev, LCDC_CTRL_REG, LCDC_CLK_DIVISOR(clkdiv) |
LCDC_RASTER_MODE);
if (priv->rev == 2)
tilcdc_set(dev, LCDC_CLK_ENABLE_REG,
LCDC_V2_DMA_CLK_EN | LCDC_V2_LIDD_CLK_EN |
LCDC_V2_CORE_CLK_EN);
if (tilcdc_crtc_is_on(crtc))
tilcdc_crtc_enable(crtc);
out:
pm_runtime_put_sync(dev->dev);
drm_modeset_unlock_crtc(crtc);
}
#define SYNC_LOST_COUNT_LIMIT 50
......
......@@ -75,8 +75,8 @@ static void tilcdc_fb_output_poll_changed(struct drm_device *dev)
drm_fbdev_cma_hotplug_event(priv->fbdev);
}
int tilcdc_atomic_check(struct drm_device *dev,
struct drm_atomic_state *state)
static int tilcdc_atomic_check(struct drm_device *dev,
struct drm_atomic_state *state)
{
int ret;
......@@ -184,12 +184,9 @@ static int cpufreq_transition(struct notifier_block *nb,
{
struct tilcdc_drm_private *priv = container_of(nb,
struct tilcdc_drm_private, freq_transition);
if (val == CPUFREQ_POSTCHANGE) {
if (priv->lcd_fck_rate != clk_get_rate(priv->clk)) {
priv->lcd_fck_rate = clk_get_rate(priv->clk);
tilcdc_crtc_update_clk(priv->crtc);
}
}
if (val == CPUFREQ_POSTCHANGE)
tilcdc_crtc_update_clk(priv->crtc);
return 0;
}
......@@ -203,8 +200,6 @@ static int tilcdc_unload(struct drm_device *dev)
{
struct tilcdc_drm_private *priv = dev->dev_private;
tilcdc_crtc_disable(priv->crtc);
tilcdc_remove_external_encoders(dev);
drm_fbdev_cma_fini(priv->fbdev);
......@@ -283,7 +278,6 @@ static int tilcdc_load(struct drm_device *dev, unsigned long flags)
}
#ifdef CONFIG_CPU_FREQ
priv->lcd_fck_rate = clk_get_rate(priv->clk);
priv->freq_transition.notifier_call = cpufreq_transition;
ret = cpufreq_register_notifier(&priv->freq_transition,
CPUFREQ_TRANSITION_NOTIFIER);
......@@ -418,13 +412,13 @@ static int tilcdc_load(struct drm_device *dev, unsigned long flags)
fail_vblank_cleanup:
drm_vblank_cleanup(dev);
fail_mode_config_cleanup:
drm_mode_config_cleanup(dev);
fail_component_cleanup:
if (priv->is_componentized)
component_unbind_all(dev->dev, dev);
fail_mode_config_cleanup:
drm_mode_config_cleanup(dev);
fail_external_cleanup:
tilcdc_remove_external_encoders(dev);
......
......@@ -74,7 +74,6 @@ struct tilcdc_drm_private {
#ifdef CONFIG_CPU_FREQ
struct notifier_block freq_transition;
unsigned int lcd_fck_rate;
#endif
struct workqueue_struct *wq;
......
......@@ -25,6 +25,7 @@
#include <drm/drm_atomic_helper.h>
#include "tilcdc_drv.h"
#include "tilcdc_panel.h"
struct panel_module {
struct tilcdc_module base;
......
......@@ -139,7 +139,7 @@ static void __init tilcdc_node_disable(struct device_node *node)
of_update_property(node, prop);
}
struct device_node * __init tilcdc_get_overlay(struct kfree_table *kft)
static struct device_node * __init tilcdc_get_overlay(struct kfree_table *kft)
{
const int size = __dtb_tilcdc_slave_compat_end -
__dtb_tilcdc_slave_compat_begin;
......@@ -195,7 +195,7 @@ static const char * const tilcdc_slave_props[] __initconst = {
NULL
};
void __init tilcdc_convert_slave_node(void)
static void __init tilcdc_convert_slave_node(void)
{
struct device_node *slave = NULL, *lcdc = NULL;
struct device_node *i2c = NULL, *fragment = NULL;
......@@ -207,7 +207,7 @@ void __init tilcdc_convert_slave_node(void)
int ret;
if (kfree_table_init(&kft))
goto out;
return;
lcdc = of_find_matching_node(NULL, tilcdc_of_match);
slave = of_find_matching_node(NULL, tilcdc_slave_of_match);
......@@ -261,7 +261,7 @@ void __init tilcdc_convert_slave_node(void)
of_node_put(fragment);
}
int __init tilcdc_slave_compat_init(void)
static int __init tilcdc_slave_compat_init(void)
{
tilcdc_convert_slave_node();
return 0;
......
......@@ -23,6 +23,7 @@
#include <drm/drm_atomic_helper.h>
#include "tilcdc_drv.h"
#include "tilcdc_tfp410.h"
struct tfp410_module {
struct tilcdc_module base;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment