Commit 66975767 authored by Stephen Boyd's avatar Stephen Boyd Committed by Wolfram Sang

i2c: i2c-qcom-geni: Properly handle DMA safe buffers

We shouldn't attempt to DMA map the message buffers passed into this
driver from the i2c core unless the message we're mapping have been
properly setup for DMA. The i2c core indicates such a situation by
setting the I2C_M_DMA_SAFE flag, so check for that flag before using DMA
mode. We can also bounce the buffer if it isn't already mapped properly
by using the i2c_get_dma_safe_msg_buf() APIs, so do that when we
want to use DMA for a message.

This fixes a problem where the kernel oopses cleaning pages for a buffer
that's mapped into the vmalloc space. The pages are returned from
request_firmware() and passed down directly to the i2c master to write
to the i2c touchscreen device. Mapping vmalloc buffers with
dma_map_single() won't work reliably, causing an oops like below:

 Unable to handle kernel paging request at virtual address ffffffc01391d000
 ...
Reported-by: default avatarPhilip Chen <philipchen@chromium.org>
Signed-off-by: default avatarStephen Boyd <swboyd@chromium.org>
Reviewed-by: default avatarDouglas Anderson <dianders@chromium.org>
Signed-off-by: default avatarWolfram Sang <wsa@the-dreams.de>
parent 6bf4ca7f
......@@ -367,20 +367,26 @@ static int geni_i2c_rx_one_msg(struct geni_i2c_dev *gi2c, struct i2c_msg *msg,
dma_addr_t rx_dma;
enum geni_se_xfer_mode mode;
unsigned long time_left = XFER_TIMEOUT;
void *dma_buf;
gi2c->cur = msg;
mode = msg->len > 32 ? GENI_SE_DMA : GENI_SE_FIFO;
mode = GENI_SE_FIFO;
dma_buf = i2c_get_dma_safe_msg_buf(msg, 32);
if (dma_buf)
mode = GENI_SE_DMA;
geni_se_select_mode(&gi2c->se, mode);
writel_relaxed(msg->len, gi2c->se.base + SE_I2C_RX_TRANS_LEN);
geni_se_setup_m_cmd(&gi2c->se, I2C_READ, m_param);
if (mode == GENI_SE_DMA) {
int ret;
ret = geni_se_rx_dma_prep(&gi2c->se, msg->buf, msg->len,
ret = geni_se_rx_dma_prep(&gi2c->se, dma_buf, msg->len,
&rx_dma);
if (ret) {
mode = GENI_SE_FIFO;
geni_se_select_mode(&gi2c->se, mode);
i2c_put_dma_safe_msg_buf(dma_buf, msg, false);
}
}
......@@ -393,6 +399,7 @@ static int geni_i2c_rx_one_msg(struct geni_i2c_dev *gi2c, struct i2c_msg *msg,
if (gi2c->err)
geni_i2c_rx_fsm_rst(gi2c);
geni_se_rx_dma_unprep(&gi2c->se, rx_dma, msg->len);
i2c_put_dma_safe_msg_buf(dma_buf, msg, !gi2c->err);
}
return gi2c->err;
}
......@@ -403,20 +410,26 @@ static int geni_i2c_tx_one_msg(struct geni_i2c_dev *gi2c, struct i2c_msg *msg,
dma_addr_t tx_dma;
enum geni_se_xfer_mode mode;
unsigned long time_left;
void *dma_buf;
gi2c->cur = msg;
mode = msg->len > 32 ? GENI_SE_DMA : GENI_SE_FIFO;
mode = GENI_SE_FIFO;
dma_buf = i2c_get_dma_safe_msg_buf(msg, 32);
if (dma_buf)
mode = GENI_SE_DMA;
geni_se_select_mode(&gi2c->se, mode);
writel_relaxed(msg->len, gi2c->se.base + SE_I2C_TX_TRANS_LEN);
geni_se_setup_m_cmd(&gi2c->se, I2C_WRITE, m_param);
if (mode == GENI_SE_DMA) {
int ret;
ret = geni_se_tx_dma_prep(&gi2c->se, msg->buf, msg->len,
ret = geni_se_tx_dma_prep(&gi2c->se, dma_buf, msg->len,
&tx_dma);
if (ret) {
mode = GENI_SE_FIFO;
geni_se_select_mode(&gi2c->se, mode);
i2c_put_dma_safe_msg_buf(dma_buf, msg, false);
}
}
......@@ -432,6 +445,7 @@ static int geni_i2c_tx_one_msg(struct geni_i2c_dev *gi2c, struct i2c_msg *msg,
if (gi2c->err)
geni_i2c_tx_fsm_rst(gi2c);
geni_se_tx_dma_unprep(&gi2c->se, tx_dma, msg->len);
i2c_put_dma_safe_msg_buf(dma_buf, msg, !gi2c->err);
}
return gi2c->err;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment