Commit 669b792c authored by Robin Getz's avatar Robin Getz Committed by Bryan Wu

Blackfin arch: Clean up trace buffer handling, No major functional changes.

Turns on trace earlier, so crashes at kernel start should print out a
trace, making things easier to debug.
Signed-off-by: default avatarRobin Getz <robin.getz@analog.com>
Signed-off-by: default avatarMike Frysinger <michael.frysinger@analog.com>
Signed-off-by: default avatarBryan Wu <bryan.wu@analog.com>
parent 29440a2b
......@@ -194,6 +194,17 @@ void __init setup_arch(char **cmdline_p)
/* this give a chance to get printk() working before crash. */
#endif
printk(KERN_INFO "Hardware Trace ");
if (bfin_read_TBUFCTL() & 0x1 )
printk("Active ");
else
printk("Off ");
if (bfin_read_TBUFCTL() & 0x2)
printk("and Enabled\n");
else
printk("and Disabled\n");
#if defined(CONFIG_CHR_DEV_FLASH) || defined(CONFIG_BLK_DEV_FLASH)
/* we need to initialize the Flashrom device here since we might
* do things with flash early on in the boot
......@@ -397,9 +408,6 @@ void __init setup_arch(char **cmdline_p)
_bfin_swrst = bfin_read_SWRST();
#endif
printk(KERN_INFO "Hardware Trace Enabled\n");
bfin_write_TBUFCTL(0x03);
/* Copy atomic sequences to their fixed location, and sanity check that
these locations are the ones that we advertise to userspace. */
memcpy((void *)FIXED_CODE_START, &fixed_code_start,
......
......@@ -33,6 +33,7 @@
#include <asm/blackfin.h>
#include <asm/uaccess.h>
#include <asm/irq_handler.h>
#include <asm/trace.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/kallsyms.h>
......@@ -131,16 +132,6 @@ static int printk_address(unsigned long address)
return printk("[<0x%p>]", (void*)address);
}
#define trace_buffer_save(x) \
do { \
(x) = bfin_read_TBUFCTL(); \
bfin_write_TBUFCTL((x) & ~TBUFEN); \
} while (0)
#define trace_buffer_restore(x) \
do { \
bfin_write_TBUFCTL((x)); \
} while (0)
asmlinkage void trap_c(struct pt_regs *fp)
{
int j, sig = 0;
......
......@@ -30,6 +30,7 @@
#include <linux/linkage.h>
#include <linux/init.h>
#include <asm/blackfin.h>
#include <asm/trace.h>
#if CONFIG_BFIN_KERNEL_CLOCK
#include <asm/mach/mem_init.h>
#endif
......@@ -96,6 +97,10 @@ ENTRY(__start)
M2 = r0;
M3 = r0;
trace_buffer_start(p0,r0);
P0 = R1;
R0 = R1;
#if CONFIG_DEBUG_KERNEL_START
/*
......
......@@ -30,6 +30,8 @@
#include <linux/linkage.h>
#include <linux/init.h>
#include <asm/blackfin.h>
#include <asm/trace.h>
#if CONFIG_BFIN_KERNEL_CLOCK
#include <asm/mach/mem_init.h>
#endif
......@@ -93,6 +95,10 @@ ENTRY(__start)
M2 = r0;
M3 = r0;
trace_buffer_start(p0,r0);
P0 = R1;
R0 = R1;
/* Turn off the icache */
p0.l = (IMEM_CONTROL & 0xFFFF);
p0.h = (IMEM_CONTROL >> 16);
......
......@@ -29,6 +29,7 @@
#include <linux/linkage.h>
#include <asm/blackfin.h>
#include <asm/trace.h>
#if CONFIG_BFIN_KERNEL_CLOCK
#include <asm/mach/mem_init.h>
#endif
......@@ -91,6 +92,10 @@ ENTRY(__stext)
M2 = r0;
M3 = r0;
trace_buffer_start(p0,r0);
P0 = R1;
R0 = R1;
/* Turn off the icache */
p0.l = (IMEM_CONTROL & 0xFFFF);
p0.h = (IMEM_CONTROL >> 16);
......
......@@ -30,6 +30,8 @@
#include <linux/linkage.h>
#include <linux/init.h>
#include <asm/blackfin.h>
#include <asm/trace.h>
#if CONFIG_BFIN_KERNEL_CLOCK
#include <asm/mach/mem_init.h>
#endif
......@@ -93,6 +95,10 @@ ENTRY(__start)
M2 = r0;
M3 = r0;
trace_buffer_start(p0,r0);
P0 = R1;
R0 = R1;
/* Turn off the icache */
p0.l = (IMEM_CONTROL & 0xFFFF);
p0.h = (IMEM_CONTROL >> 16);
......
......@@ -54,29 +54,10 @@
#include <asm/errno.h>
#include <asm/thread_info.h> /* TIF_NEED_RESCHED */
#include <asm/asm-offsets.h>
#include <asm/trace.h>
#include <asm/mach-common/context.S>
#ifdef CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE
/*
* TODO: this should be proper save/restore, but for now
* we'll just cheat and use 0x1/0x13
*/
# define DEBUG_START_HWTRACE \
P5.l = LO(TBUFCTL); \
P5.h = HI(TBUFCTL); \
R7 = 0x13; \
[P5] = R7;
# define DEBUG_STOP_HWTRACE \
P5.l = LO(TBUFCTL); \
P5.h = HI(TBUFCTL); \
R7 = 0x01; \
[P5] = R7;
#else
# define DEBUG_START_HWTRACE
# define DEBUG_STOP_HWTRACE
#endif
#ifdef CONFIG_EXCPT_IRQ_SYSC_L1
.section .l1.text
#else
......@@ -110,7 +91,7 @@ ENTRY(_ex_icplb)
ASTAT = [sp++];
SAVE_ALL_SYS
call __cplb_hdr;
DEBUG_START_HWTRACE
DEBUG_START_HWTRACE(p5, r7)
RESTORE_ALL_SYS
SP = RETN;
rtx;
......@@ -128,7 +109,7 @@ ENTRY(_ex_spinlock)
ENDPROC(_ex_spinlock)
ENTRY(_ex_syscall)
DEBUG_START_HWTRACE
DEBUG_START_HWTRACE(p5, r7)
(R7:6,P5:4) = [sp++];
ASTAT = [sp++];
raise 15; /* invoked by TRAP #0, for sys call */
......@@ -186,7 +167,7 @@ ENTRY(_ex_single_step)
if !cc jump _ex_trap_c;
_return_from_exception:
DEBUG_START_HWTRACE
DEBUG_START_HWTRACE(p5, r7)
#ifdef ANOMALY_05000257
R7=LC0;
LC0=R7;
......@@ -208,7 +189,7 @@ ENTRY(_handle_bad_cplb)
* need to make a CPLB exception look like a normal exception
*/
DEBUG_START_HWTRACE
DEBUG_START_HWTRACE(p5, r7)
RESTORE_ALL_SYS
[--sp] = ASTAT;
[--sp] = (R7:6, P5:4);
......@@ -251,7 +232,7 @@ ENTRY(_ex_trap_c)
R6 = SEQSTAT;
[P5] = R6;
DEBUG_START_HWTRACE
DEBUG_START_HWTRACE(p5, r7)
(R7:6,P5:4) = [sp++];
ASTAT = [sp++];
SP = RETN;
......@@ -335,7 +316,7 @@ ENTRY(_trap) /* Exception: 4th entry into system event table(supervisor mode)*/
/* Try to deal with syscalls quickly. */
[--sp] = ASTAT;
[--sp] = (R7:6, P5:4);
DEBUG_STOP_HWTRACE
DEBUG_STOP_HWTRACE(p5, r7)
r7 = SEQSTAT; /* reason code is in bit 5:0 */
r6.l = lo(SEQSTAT_EXCAUSE);
r6.h = hi(SEQSTAT_EXCAUSE);
......
......@@ -34,6 +34,7 @@
#include <linux/linkage.h>
#include <asm/entry.h>
#include <asm/asm-offsets.h>
#include <asm/trace.h>
#include <asm/mach-common/context.S>
......@@ -170,10 +171,9 @@ ENTRY(_evt_ivhw)
r7.l = W[p5];
1:
#endif
p0.l = lo(TBUFCTL);
p0.h = hi(TBUFCTL);
r0 = 1;
[p0] = r0;
trace_buffer_stop(p0, r0);
r0 = IRQ_HWERR;
r1 = sp;
......
/*
* Common header file for blackfin family of processors.
*
*/
#ifndef _BLACKFIN_TRACE_
#define _BLACKFIN_TRACE_
#ifndef __ASSEMBLY__
/* Trace Macros for C files */
#define trace_buffer_save(x) \
do { \
(x) = bfin_read_TBUFCTL(); \
bfin_write_TBUFCTL((x) & ~TBUFEN); \
} while (0)
#define trace_buffer_restore(x) \
do { \
bfin_write_TBUFCTL((x)); \
} while (0)
#else
/* Trace Macros for Assembly files */
#define TRACE_BUFFER_START(preg, dreg) trace_buffer_start(preg, dreg)
#define TRACE_BUFFER_STOP(preg, dreg) trace_buffer_stop(preg, dreg)
#define trace_buffer_stop(preg, dreg) \
preg.L = LO(TBUFCTL); \
preg.H = HI(TBUFCTL); \
dreg = 0x1; \
[preg] = dreg;
#define trace_buffer_start(preg, dreg) \
preg.L = LO(TBUFCTL); \
preg.H = HI(TBUFCTL); \
dreg = 0x13; \
[preg] = dreg;
#ifdef CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE
# define DEBUG_START_HWTRACE(preg, dreg) trace_buffer_start(preg, dreg)
# define DEBUG_STOP_HWTRACE(preg, dreg) trace_buffer_stop(preg, dreg)
#else
# define DEBUG_START_HWTRACE(preg, dreg)
# define DEBUG_STOP_HWTRACE(preg, dreg)
#endif
#endif /* __ASSEMBLY__ */
#endif /* _BLACKFIN_TRACE_ */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment