[SCSI] stex: extend hard reset wait time

During hard bus reset of st_shasta controllers, 1 ms is not enough for
16-port controllers, although it's good for 8-port controllers.  Extend the
wait time to 100  ms to allow bus resets finish successfully.
Signed-off-by: Ed Lin <ed.lin@promise.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

drivers/scsi/stex.c

@@ -1041,7 +1041,12 @@ static void stex_hard_reset(struct st_hba *hba)
 	pci_read_config_byte(bus->self, PCI_BRIDGE_CONTROL, &pci_bctl);
 	pci_bctl |= PCI_BRIDGE_CTL_BUS_RESET;
 	pci_write_config_byte(bus->self, PCI_BRIDGE_CONTROL, pci_bctl);
-	msleep(1);
+
+	/*
+	 * 1 ms may be enough for 8-port controllers. But 16-port controllers
+	 * require more time to finish bus reset. Use 100 ms here for safety
+	 */
+	msleep(100);
 	pci_bctl &= ~PCI_BRIDGE_CTL_BUS_RESET;
 	pci_write_config_byte(bus->self, PCI_BRIDGE_CONTROL, pci_bctl);