Commit 69fc0129 authored by Lothar Waßmann's avatar Lothar Waßmann Committed by Boris Brezillon

mtd: nand: make Samsung SLC NAND usable again

commit c51d0ac5 ("mtd: nand: Move Samsung specific init/detection
logic in nand_samsung.c") introduced a regression for Samsung SLC NAND
chips. Prior to this commit chip->bits_per_cell was initialized by calling
nand_get_bits_per_cell() before using nand_is_slc().
With the offending commit this call is skipped, leaving
chip->bits_per_cell cleared to zero when the manufacturer specific
'.detect' function calls nand_is_slc() which in turn interprets
bits_per_cell != 1 as indication for an MLC chip.
The effect is that e.g. a K9F1G08U0F NAND chip is falsely detected as
MLC NAND with 4KiB page size rather than SLC with 2KiB page size.

Add a call to nand_get_bits_per_cell() before calling the .detect hook
function in nand_manufacturer_detect(), so that the nand_is_slc()
calls in the manufacturer specific code will return correct results.

Fixes: c51d0ac5 ("mtd: nand: Move Samsung specific init/detection logic in nand_samsung.c")
Cc: <stable@vger.kernel.org>
Signed-off-by: default avatarLothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: default avatarBoris Brezillon <boris.brezillon@free-electrons.com>
parent a75d6a4c
...@@ -3813,10 +3813,13 @@ static void nand_manufacturer_detect(struct nand_chip *chip) ...@@ -3813,10 +3813,13 @@ static void nand_manufacturer_detect(struct nand_chip *chip)
* nand_decode_ext_id() otherwise. * nand_decode_ext_id() otherwise.
*/ */
if (chip->manufacturer.desc && chip->manufacturer.desc->ops && if (chip->manufacturer.desc && chip->manufacturer.desc->ops &&
chip->manufacturer.desc->ops->detect) chip->manufacturer.desc->ops->detect) {
/* The 3rd id byte holds MLC / multichip data */
chip->bits_per_cell = nand_get_bits_per_cell(chip->id.data[2]);
chip->manufacturer.desc->ops->detect(chip); chip->manufacturer.desc->ops->detect(chip);
else } else {
nand_decode_ext_id(chip); nand_decode_ext_id(chip);
}
} }
/* /*
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment