Commit 6a3cec64 authored by Miquel Raynal's avatar Miquel Raynal

mtd: rawnand: qcom: convert driver to nand_scan()

Two helpers have been added to the core to do all kind of controller
side configuration/initialization between the detection phase and the
final NAND scan. Implement these hooks so that we can convert the driver
to just use nand_scan() instead of the nand_scan_ident() +
nand_scan_tail() pair.
Signed-off-by: default avatarMiquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: default avatarBoris Brezillon <boris.brezillon@bootlin.com>
parent fe13ae02
......@@ -2475,10 +2475,10 @@ qcom_nandc_calc_ecc_bytes(int step_size, int strength)
NAND_ECC_CAPS_SINGLE(qcom_nandc_ecc_caps, qcom_nandc_calc_ecc_bytes,
NANDC_STEP_SIZE, 4, 8);
static int qcom_nand_host_setup(struct qcom_nand_host *host)
static int qcom_nand_attach_chip(struct nand_chip *chip)
{
struct nand_chip *chip = &host->chip;
struct mtd_info *mtd = nand_to_mtd(chip);
struct qcom_nand_host *host = to_qcom_nand_host(chip);
struct nand_ecc_ctrl *ecc = &chip->ecc;
struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
int cwperpage, bad_block_byte, ret;
......@@ -2640,6 +2640,10 @@ static int qcom_nand_host_setup(struct qcom_nand_host *host)
return 0;
}
static const struct nand_controller_ops qcom_nandc_ops = {
.attach_chip = qcom_nand_attach_chip,
};
static int qcom_nandc_alloc(struct qcom_nand_controller *nandc)
{
int ret;
......@@ -2729,6 +2733,7 @@ static int qcom_nandc_alloc(struct qcom_nand_controller *nandc)
INIT_LIST_HEAD(&nandc->host_list);
nand_controller_init(&nandc->controller);
nandc->controller.ops = &qcom_nandc_ops;
return 0;
}
......@@ -2781,9 +2786,9 @@ static int qcom_nandc_setup(struct qcom_nand_controller *nandc)
return 0;
}
static int qcom_nand_host_init(struct qcom_nand_controller *nandc,
struct qcom_nand_host *host,
struct device_node *dn)
static int qcom_nand_host_init_and_register(struct qcom_nand_controller *nandc,
struct qcom_nand_host *host,
struct device_node *dn)
{
struct nand_chip *chip = &host->chip;
struct mtd_info *mtd = nand_to_mtd(chip);
......@@ -2830,30 +2835,13 @@ static int qcom_nand_host_init(struct qcom_nand_controller *nandc,
/* set up initial status value */
host->status = NAND_STATUS_READY | NAND_STATUS_WP;
ret = nand_scan_ident(mtd, 1, NULL);
if (ret)
return ret;
ret = qcom_nand_host_setup(host);
return ret;
}
static int qcom_nand_mtd_register(struct qcom_nand_controller *nandc,
struct qcom_nand_host *host,
struct device_node *dn)
{
struct nand_chip *chip = &host->chip;
struct mtd_info *mtd = nand_to_mtd(chip);
int ret;
ret = nand_scan_tail(mtd);
ret = nand_scan(mtd, 1);
if (ret)
return ret;
ret = mtd_device_register(mtd, NULL, 0);
if (ret)
nand_cleanup(mtd_to_nand(mtd));
nand_cleanup(chip);
return ret;
}
......@@ -2862,28 +2850,9 @@ static int qcom_probe_nand_devices(struct qcom_nand_controller *nandc)
{
struct device *dev = nandc->dev;
struct device_node *dn = dev->of_node, *child;
struct qcom_nand_host *host, *tmp;
struct qcom_nand_host *host;
int ret;
for_each_available_child_of_node(dn, child) {
host = devm_kzalloc(dev, sizeof(*host), GFP_KERNEL);
if (!host) {
of_node_put(child);
return -ENOMEM;
}
ret = qcom_nand_host_init(nandc, host, child);
if (ret) {
devm_kfree(dev, host);
continue;
}
list_add_tail(&host->node, &nandc->host_list);
}
if (list_empty(&nandc->host_list))
return -ENODEV;
if (nandc->props->is_bam) {
free_bam_transaction(nandc);
nandc->bam_txn = alloc_bam_transaction(nandc);
......@@ -2894,12 +2863,20 @@ static int qcom_probe_nand_devices(struct qcom_nand_controller *nandc)
}
}
list_for_each_entry_safe(host, tmp, &nandc->host_list, node) {
ret = qcom_nand_mtd_register(nandc, host, child);
for_each_available_child_of_node(dn, child) {
host = devm_kzalloc(dev, sizeof(*host), GFP_KERNEL);
if (!host) {
of_node_put(child);
return -ENOMEM;
}
ret = qcom_nand_host_init_and_register(nandc, host, child);
if (ret) {
list_del(&host->node);
devm_kfree(dev, host);
continue;
}
list_add_tail(&host->node, &nandc->host_list);
}
if (list_empty(&nandc->host_list))
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment