Revert "firmware: raspberrypi: Introduce vl805 init routine"

This reverts commit fbbc5ff3.

The vl805 init routine has moved into drivers/reset/reset-raspberrypi.c
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Link: https://lore.kernel.org/r/20200629161845.6021-9-nsaenzjulienne@suse.deSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/firmware/raspberrypi.c

@@ -12,8 +12,6 @@
 #include <linux/of_platform.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
 #include <soc/bcm2835/raspberrypi-firmware.h>
 
 #define MBOX_MSG(chan, data28)		(((data28) & ~0xf) | ((chan) & 0xf))
@@ -21,8 +19,6 @@
 #define MBOX_DATA28(msg)		((msg) & ~0xf)
 #define MBOX_CHAN_PROPERTY		8
 
-#define VL805_PCI_CONFIG_VERSION_OFFSET		0x50
-
 static struct platform_device *rpi_hwmon;
 static struct platform_device *rpi_clk;
 
@@ -301,63 +297,6 @@ struct rpi_firmware *rpi_firmware_get(struct device_node *firmware_node)
 }
 EXPORT_SYMBOL_GPL(rpi_firmware_get);
 
-/*
- * The Raspberry Pi 4 gets its USB functionality from VL805, a PCIe chip that
- * implements xHCI. After a PCI reset, VL805's firmware may either be loaded
- * directly from an EEPROM or, if not present, by the SoC's co-processor,
- * VideoCore. RPi4's VideoCore OS contains both the non public firmware load
- * logic and the VL805 firmware blob. This function triggers the aforementioned
- * process.
- */
-int rpi_firmware_init_vl805(struct pci_dev *pdev)
-{
-	struct device_node *fw_np;
-	struct rpi_firmware *fw;
-	u32 dev_addr, version;
-	int ret;
-
-	fw_np = of_find_compatible_node(NULL, NULL,
-					"raspberrypi,bcm2835-firmware");
-	if (!fw_np)
-		return 0;
-
-	fw = rpi_firmware_get(fw_np);
-	of_node_put(fw_np);
-	if (!fw)
-		return -ENODEV;
-
-	/*
-	 * Make sure we don't trigger a firmware load unnecessarily.
-	 *
-	 * If something went wrong with PCI, this whole exercise would be
-	 * futile as VideoCore expects from us a configured PCI bus. Just take
-	 * the faulty version (likely ~0) and let xHCI's registration fail
-	 * further down the line.
-	 */
-	pci_read_config_dword(pdev, VL805_PCI_CONFIG_VERSION_OFFSET, &version);
-	if (version)
-		goto exit;
-
-	dev_addr = pdev->bus->number << 20 | PCI_SLOT(pdev->devfn) << 15 |
-		   PCI_FUNC(pdev->devfn) << 12;
-
-	ret = rpi_firmware_property(fw, RPI_FIRMWARE_NOTIFY_XHCI_RESET,
-				    &dev_addr, sizeof(dev_addr));
-	if (ret)
-		return ret;
-
-	/* Wait for vl805 to startup */
-	usleep_range(200, 1000);
-
-	pci_read_config_dword(pdev, VL805_PCI_CONFIG_VERSION_OFFSET,
-			      &version);
-exit:
-	pci_info(pdev, "VL805 firmware version %08x\n", version);
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(rpi_firmware_init_vl805);
-
 static const struct of_device_id rpi_firmware_of_match[] = {
 	{ .compatible = "raspberrypi,bcm2835-firmware", },
 	{},

include/soc/bcm2835/raspberrypi-firmware.h

@@ -10,7 +10,6 @@
 #include <linux/of_device.h>
 
 struct rpi_firmware;
-struct pci_dev;
 
 enum rpi_firmware_property_status {
 	RPI_FIRMWARE_STATUS_REQUEST = 0,
@@ -142,7 +141,6 @@ int rpi_firmware_property(struct rpi_firmware *fw,
 int rpi_firmware_property_list(struct rpi_firmware *fw,
 			       void *data, size_t tag_size);
 struct rpi_firmware *rpi_firmware_get(struct device_node *firmware_node);
-int rpi_firmware_init_vl805(struct pci_dev *pdev);
 #else
 static inline int rpi_firmware_property(struct rpi_firmware *fw, u32 tag,
 					void *data, size_t len)
@@ -160,11 +158,6 @@ static inline struct rpi_firmware *rpi_firmware_get(struct device_node *firmware
 {
 	return NULL;
 }
-
-static inline int rpi_firmware_init_vl805(struct pci_dev *pdev)
-{
-	return 0;
-}
 #endif
 
 #endif /* __SOC_RASPBERRY_FIRMWARE_H__ */