ASoC: Intel: move the jack creation to Braswell machine driver

The jack creation code was in rt5670 codec driver before due to the
jack resources (gpio/irq) were defined under the node of codec device
in ACPI on Braswell. We used the snd_soc_jack_new() to create a jack
instance.

But now snd_soc_jack_new() is removed from upstream and we can't
use snd_soc_card_jack_new() in codec driver, so we move the jack
creation code to machine driver and pass the jack instance to codec
driver for further processing.
Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

sound/soc/intel/cht_bsw_rt5672.c

@@ -22,6 +22,7 @@
 #include <sound/pcm.h>
 #include <sound/pcm_params.h>
 #include <sound/soc.h>
+#include <sound/jack.h>
 #include "../codecs/rt5670.h"
 #include "sst-atom-controls.h"
 
@@ -29,6 +30,20 @@
 #define CHT_PLAT_CLK_3_HZ	19200000
 #define CHT_CODEC_DAI	"rt5670-aif1"
 
+static struct snd_soc_jack cht_bsw_headset;
+
+/* Headset jack detection DAPM pins */
+static struct snd_soc_jack_pin cht_bsw_headset_pins[] = {
+	{
+		.pin = "Headset Mic",
+		.mask = SND_JACK_MICROPHONE,
+	},
+	{
+		.pin = "Headphone",
+		.mask = SND_JACK_HEADPHONE,
+	},
+};
+
 static inline struct snd_soc_dai *cht_get_codec_dai(struct snd_soc_card *card)
 {
 	int i;
@@ -178,6 +193,15 @@ static int cht_codec_init(struct snd_soc_pcm_runtime *runtime)
 				| RT5670_AD_MONO_L_FILTER
 				| RT5670_AD_MONO_R_FILTER,
 				RT5670_CLK_SEL_I2S1_ASRC);
+
+        ret = snd_soc_card_jack_new(runtime->card, "Headset",
+                SND_JACK_HEADSET | SND_JACK_BTN_0 |
+                SND_JACK_BTN_1 | SND_JACK_BTN_2, &cht_bsw_headset,
+                cht_bsw_headset_pins, ARRAY_SIZE(cht_bsw_headset_pins));
+        if (ret)
+                return ret;
+
+	rt5670_set_jack_detect(codec, &cht_bsw_headset);
 	return 0;
 }