V4L/DVB (4396): Add drivers for tda10086 + tda826x chips

TDA10086 is a new DVB-S demodulator
TDA826x is a DVB-S Silicon Tuner
Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

drivers/media/dvb/frontends/Kconfig

@@ -46,6 +46,13 @@ config DVB_S5H1420
 	help
 	  A DVB-S tuner module. Say Y when you want to support this frontend.
 
+config DVB_TDA10086
+	tristate "Philips TDA10086 based"
+	depends on DVB_CORE
+	default m if DVB_FE_CUSTOMISE
+	help
+	  A DVB-S tuner module. Say Y when you want to support this frontend.
+
 comment "DVB-T (terrestrial) frontends"
 	depends on DVB_CORE
 
@@ -216,6 +223,15 @@ config DVB_LGDT330X
 	  An ATSC 8VSB and QAM64/256 tuner module. Say Y when you want
 	  to support this frontend.
 
+comment "Tuners/PLL support"
+	depends on DVB_CORE
+
+config DVB_TDA826X
+	tristate "Philips TDA826X silicon tuner"
+	depends on DVB_CORE
+	default m if DVB_FE_CUSTOMISE
+	help
+	  A DVB-S silicon tuner module. Say Y when you want to support this tuner.
 
 comment "Miscellaneous devices"
 	depends on DVB_CORE

drivers/media/dvb/frontends/Makefile

@@ -33,3 +33,5 @@ obj-$(CONFIG_DVB_LGDT330X) += lgdt330x.o
 obj-$(CONFIG_DVB_CX24123) += cx24123.o
 obj-$(CONFIG_DVB_LNBP21) += lnbp21.o
 obj-$(CONFIG_DVB_ISL6421) += isl6421.o
+obj-$(CONFIG_DVB_TDA10086) += tda10086.o
+obj-$(CONFIG_DVB_TDA826X) += tda826x.o

drivers/media/dvb/frontends/tda10086.h

+  /*
+     Driver for Philips tda10086 DVBS Frontend
+
+     (c) 2006 Andrew de Quincey
+
+     This program is free software; you can redistribute it and/or modify
+     it under the terms of the GNU General Public License as published by
+     the Free Software Foundation; either version 2 of the License, or
+     (at your option) any later version.
+
+     This program is distributed in the hope that it will be useful,
+     but WITHOUT ANY WARRANTY; without even the implied warranty of
+     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+
+     GNU General Public License for more details.
+
+     You should have received a copy of the GNU General Public License
+     along with this program; if not, write to the Free Software
+     Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+
+   */
+
+#ifndef TDA10086_H
+#define TDA10086_H
+
+#include <linux/dvb/frontend.h>
+#include <linux/firmware.h>
+
+struct tda10086_config
+{
+	/* the demodulator's i2c address */
+	u8 demod_address;
+
+	/* does the "inversion" need inverted? */
+	u8 invert;
+};
+
+extern struct dvb_frontend* tda10086_attach(const struct tda10086_config* config,
+					    struct i2c_adapter* i2c);
+
+#endif // TDA10086_H

drivers/media/dvb/frontends/tda826x.c

+  /*
+     Driver for Philips tda8262/tda8263 DVBS Silicon tuners
+
+     (c) 2006 Andrew de Quincey
+
+     This program is free software; you can redistribute it and/or modify
+     it under the terms of the GNU General Public License as published by
+     the Free Software Foundation; either version 2 of the License, or
+     (at your option) any later version.
+
+     This program is distributed in the hope that it will be useful,
+     but WITHOUT ANY WARRANTY; without even the implied warranty of
+     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+
+     GNU General Public License for more details.
+
+     You should have received a copy of the GNU General Public License
+     along with this program; if not, write to the Free Software
+     Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+
+  */
+
+#include <linux/module.h>
+#include <linux/dvb/frontend.h>
+#include <asm/types.h>
+
+#include "tda826x.h"
+
+struct tda826x_priv {
+	/* i2c details */
+	int i2c_address;
+	struct i2c_adapter *i2c;
+	u8 has_loopthrough:1;
+	u32 frequency;
+};
+
+static int tda826x_release(struct dvb_frontend *fe)
+{
+	if (fe->tuner_priv)
+		kfree(fe->tuner_priv);
+	fe->tuner_priv = NULL;
+	return 0;
+}
+
+static int tda826x_sleep(struct dvb_frontend *fe)
+{
+	struct tda826x_priv *priv = fe->tuner_priv;
+	int ret;
+	u8 buf [] = { 0x00, 0x8d };
+	struct i2c_msg msg = { .addr = priv->i2c_address, .flags = 0, .buf = buf, .len = 2 };
+
+	if (!priv->has_loopthrough)
+		buf[1] = 0xad;
+
+	if (fe->ops.i2c_gate_ctrl)
+		fe->ops.i2c_gate_ctrl(fe, 1);
+	if ((ret = i2c_transfer (priv->i2c, &msg, 1)) != 1) {
+		printk("%s: i2c error\n", __FUNCTION__);
+	}
+	if (fe->ops.i2c_gate_ctrl)
+		fe->ops.i2c_gate_ctrl(fe, 0);
+	printk("%s:\n", __FUNCTION__);
+
+	return (ret == 1) ? 0 : ret;
+}
+
+static int tda826x_set_params(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
+{
+	struct tda826x_priv *priv = fe->tuner_priv;
+	int ret;
+	u32 div;
+	u8 buf [11];
+	struct i2c_msg msg = { .addr = priv->i2c_address, .flags = 0, .buf = buf, .len = 11 };
+
+	div = (params->frequency + (1000-1)) / 1000;
+
+	buf[0] = 0x00; // subaddress
+	buf[1] = 0x09; // powerdown RSSI + the magic value 1
+	if (!priv->has_loopthrough)
+		buf[1] |= 0x20; // power down loopthrough if not needed
+	buf[2] = (1<<5) | 0x0b; // 1Mhz + 0.45 VCO
+	buf[3] = div >> 7;
+	buf[4] = div << 1;
+	buf[5] = 0xff; // basedband filter to max
+	buf[6] = 0xfe; // gains at max + no RF attenuation
+	buf[7] = 0x83; // charge pumps at high, tests off
+	buf[8] = 0x80; // recommended value 4 for AMPVCO + disable ports.
+	buf[9] = 0x1a; // normal caltime + recommended values for SELTH + SELVTL
+	buf[10] = 0xd4; // recommended value 13 for BBIAS + unknown bit set on
+
+	if (fe->ops.i2c_gate_ctrl)
+		fe->ops.i2c_gate_ctrl(fe, 1);
+	if ((ret = i2c_transfer (priv->i2c, &msg, 1)) != 1) {
+		printk("%s: i2c error\n", __FUNCTION__);
+	}
+	if (fe->ops.i2c_gate_ctrl)
+		fe->ops.i2c_gate_ctrl(fe, 0);
+
+	priv->frequency = div * 1000;
+	printk("%s:\n", __FUNCTION__);
+
+	return (ret == 1) ? 0 : ret;
+}
+
+static int tda826x_get_frequency(struct dvb_frontend *fe, u32 *frequency)
+{
+	struct tda826x_priv *priv = fe->tuner_priv;
+	*frequency = priv->frequency;
+	return 0;
+}
+
+static struct dvb_tuner_ops tda826x_tuner_ops = {
+	.release = tda826x_release,
+	.sleep = tda826x_sleep,
+	.set_params = tda826x_set_params,
+	.get_frequency = tda826x_get_frequency,
+};
+
+struct dvb_frontend *tda826x_attach(struct dvb_frontend *fe, int addr, struct i2c_adapter *i2c, int has_loopthrough)
+{
+	struct tda826x_priv *priv = NULL;
+	u8 b1 [] = { 0, 0 };
+	struct i2c_msg msg [] = { { .addr = addr, .flags = 0, .buf = NULL, .len = 0 },
+				  { .addr = addr, .flags = I2C_M_RD, .buf = b1, .len = 2 } };
+	int ret;
+
+	if (fe->ops.i2c_gate_ctrl)
+		fe->ops.i2c_gate_ctrl(fe, 1);
+	ret = i2c_transfer (i2c, msg, 2);
+	if (fe->ops.i2c_gate_ctrl)
+		fe->ops.i2c_gate_ctrl(fe, 0);
+
+	if (ret != 2)
+		return NULL;
+	if (!(b1[1] & 0x80))
+		return NULL;
+
+	priv = kzalloc(sizeof(struct tda826x_priv), GFP_KERNEL);
+	if (priv == NULL)
+		return NULL;
+
+	priv->i2c_address = addr;
+	priv->i2c = i2c;
+	priv->has_loopthrough = has_loopthrough;
+
+	memcpy(&fe->ops.tuner_ops, &tda826x_tuner_ops, sizeof(struct dvb_tuner_ops));
+	strncpy(fe->ops.tuner_ops.info.name, "Philips TDA826X", 128);
+	fe->ops.tuner_ops.info.frequency_min = 950000;
+	fe->ops.tuner_ops.info.frequency_min = 2175000;
+
+	fe->tuner_priv = priv;
+	printk("%s:\n", __FUNCTION__);
+
+	return fe;
+}
+EXPORT_SYMBOL(tda826x_attach);
+
+MODULE_DESCRIPTION("DVB TDA826x driver");
+MODULE_AUTHOR("Andrew de Quincey");
+MODULE_LICENSE("GPL");

drivers/media/dvb/frontends/tda826x.h

+  /*
+     Driver for Philips tda8262/tda8263 DVBS Silicon tuners
+
+     (c) 2006 Andrew de Quincey
+
+     This program is free software; you can redistribute it and/or modify
+     it under the terms of the GNU General Public License as published by
+     the Free Software Foundation; either version 2 of the License, or
+     (at your option) any later version.
+
+     This program is distributed in the hope that it will be useful,
+     but WITHOUT ANY WARRANTY; without even the implied warranty of
+     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+
+     GNU General Public License for more details.
+
+     You should have received a copy of the GNU General Public License
+     along with this program; if not, write to the Free Software
+     Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+
+  */
+
+#ifndef __DVB_TDA826X_H__
+#define __DVB_TDA826X_H__
+
+#include <linux/i2c.h>
+#include "dvb_frontend.h"
+
+/**
+ * Attach a tda826x tuner to the supplied frontend structure.
+ *
+ * @param fe Frontend to attach to.
+ * @param addr i2c address of the tuner.
+ * @param i2c i2c adapter to use.
+ * @param has_loopthrough Set to 1 if the card has a loopthrough RF connector.
+ * @return FE pointer on success, NULL on failure.
+ */
+extern struct dvb_frontend *tda826x_attach(struct dvb_frontend *fe, int addr, struct i2c_adapter *i2c, int has_loopthrough);
+
+#endif