ath10k: fix channel info parsing for non tlv target

The tlv targets such as WCN3990 send more data in the chan info event, which is
not sent by the non tlv targets. There is a minimum size check in the wmi event
for non-tlv targets and hence we cannot update the common channel info
structure as it was done in commit 13104929 ("ath10k: fill the channel
survey results for WCN3990 correctly"). This broke channel survey results on
10.x firmware versions.

If the common channel info structure is updated, the size check for chan info
event for non-tlv targets will fail and return -EPROTO and we see the below
error messages

   ath10k_pci 0000:01:00.0: failed to parse chan info event: -71

Add tlv specific channel info structure and restore the original size of the
common channel info structure to mitigate this issue.

Tested HW: WCN3990
	   QCA9887
Tested FW: WLAN.HL.3.1-00784-QCAHLSWMTPLZ-1
	   10.2.4-1.0-00037

Fixes: 13104929 ("ath10k: fill the channel survey results for WCN3990 correctly")
Cc: stable@vger.kernel.org # 5.0
Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

drivers/net/wireless/ath/ath10k/wmi-tlv.c

@@ -841,7 +841,7 @@ static int ath10k_wmi_tlv_op_pull_ch_info_ev(struct ath10k *ar,
 					     struct wmi_ch_info_ev_arg *arg)
 {
 	const void **tb;
-	const struct wmi_chan_info_event *ev;
+	const struct wmi_tlv_chan_info_event *ev;
 	int ret;
 
 	tb = ath10k_wmi_tlv_parse_alloc(ar, skb->data, skb->len, GFP_ATOMIC);

drivers/net/wireless/ath/ath10k/wmi-tlv.h

@@ -1615,6 +1615,22 @@ struct chan_info_params {
 
 #define WMI_TLV_FLAG_MGMT_BUNDLE_TX_COMPL	BIT(9)
 
+struct wmi_tlv_chan_info_event {
+	__le32 err_code;
+	__le32 freq;
+	__le32 cmd_flags;
+	__le32 noise_floor;
+	__le32 rx_clear_count;
+	__le32 cycle_count;
+	__le32 chan_tx_pwr_range;
+	__le32 chan_tx_pwr_tp;
+	__le32 rx_frame_count;
+	__le32 my_bss_rx_cycle_count;
+	__le32 rx_11b_mode_data_duration;
+	__le32 tx_frame_cnt;
+	__le32 mac_clk_mhz;
+} __packed;
+
 struct wmi_tlv_mgmt_tx_compl_ev {
 	__le32 desc_id;
 	__le32 status;

drivers/net/wireless/ath/ath10k/wmi.h

@@ -6533,14 +6533,6 @@ struct wmi_chan_info_event {
 	__le32 noise_floor;
 	__le32 rx_clear_count;
 	__le32 cycle_count;
-	__le32 chan_tx_pwr_range;
-	__le32 chan_tx_pwr_tp;
-	__le32 rx_frame_count;
-	__le32 my_bss_rx_cycle_count;
-	__le32 rx_11b_mode_data_duration;
-	__le32 tx_frame_cnt;
-	__le32 mac_clk_mhz;
-
 } __packed;
 
 struct wmi_10_4_chan_info_event {