ARM: OMAP4: Ctrl module register define diet

The mach-omap2 directory contains full register defines for OMAP4
control module but only around 27 of those are used. There are is
a total of 1795 register defines in four files with only 27 in use.
That is pretty low usefulness ratio...

I guess alot more was used when we had omap4 board files and
mach-omap2 contained more drivers but this has now changed.
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
[tony@atomide.com: updated to apply]
Signed-off-by: Tony Lindgren <tony@atomide.com>

arch/arm/mach-omap2/control.h

@@ -16,11 +16,6 @@
 #ifndef __ARCH_ARM_MACH_OMAP2_CONTROL_H
 #define __ARCH_ARM_MACH_OMAP2_CONTROL_H
 
-#include "ctrl_module_core_44xx.h"
-#include "ctrl_module_wkup_44xx.h"
-#include "ctrl_module_pad_core_44xx.h"
-#include "ctrl_module_pad_wkup_44xx.h"
-
 #include "am33xx.h"
 
 #ifndef __ASSEMBLY__
@@ -254,6 +249,39 @@
 /* TI81XX CONTROL_DEVCONF register offsets */
 #define TI81XX_CONTROL_DEVICE_ID	(TI81XX_CONTROL_DEVCONF + 0x000)
 
+/* OMAP4 CONTROL MODULE */
+#define OMAP4_CTRL_MODULE_PAD_WKUP			0x4a31e000
+#define OMAP4_CTRL_MODULE_PAD_WKUP_CONTROL_I2C_2	0x0604
+#define OMAP4_CTRL_MODULE_CORE_STATUS			0x02c4
+#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_PROD_ID_1	0x0218
+#define OMAP4_CTRL_MODULE_CORE_DSP_BOOTADDR		0x0304
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_DSIPHY	0x0618
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_CAMERA_RX	0x0608
+
+/* OMAP4 CONTROL_DSIPHY */
+#define OMAP4_DSI2_LANEENABLE_SHIFT			29
+#define OMAP4_DSI2_LANEENABLE_MASK			(0x7 << 29)
+#define OMAP4_DSI1_LANEENABLE_SHIFT			24
+#define OMAP4_DSI1_LANEENABLE_MASK			(0x1f << 24)
+#define OMAP4_DSI1_PIPD_SHIFT				19
+#define OMAP4_DSI1_PIPD_MASK				(0x1f << 19)
+#define OMAP4_DSI2_PIPD_SHIFT				14
+#define OMAP4_DSI2_PIPD_MASK				(0x1f << 14)
+
+/* OMAP4 CONTROL_CAMERA_RX */
+#define OMAP4_CAMERARX_CSI21_LANEENABLE_SHIFT		24
+#define OMAP4_CAMERARX_CSI21_LANEENABLE_MASK		(0x1f << 24)
+#define OMAP4_CAMERARX_CSI22_LANEENABLE_SHIFT		29
+#define OMAP4_CAMERARX_CSI22_LANEENABLE_MASK		(0x3 << 29)
+#define OMAP4_CAMERARX_CSI22_CTRLCLKEN_SHIFT		21
+#define OMAP4_CAMERARX_CSI22_CTRLCLKEN_MASK		(1 << 21)
+#define OMAP4_CAMERARX_CSI22_CAMMODE_SHIFT		19
+#define OMAP4_CAMERARX_CSI22_CAMMODE_MASK		(0x3 << 19)
+#define OMAP4_CAMERARX_CSI21_CTRLCLKEN_SHIFT		18
+#define OMAP4_CAMERARX_CSI21_CTRLCLKEN_MASK		(1 << 18)
+#define OMAP4_CAMERARX_CSI21_CAMMODE_SHIFT		16
+#define OMAP4_CAMERARX_CSI21_CAMMODE_MASK		(0x3 << 16)
+
 /* OMAP54XX CONTROL STATUS register */
 #define OMAP5XXX_CONTROL_STATUS                0x134
 #define OMAP5_DEVICETYPE_MASK          (0x7 << 6)