davinci: Initial support for Omapl138-Hawkboard

This patch adds initial support for the Hawkboard-L138 system
It is under the machine name "omapl138_hawkboard".
This system is based on the da850 davinci CPU architecture.
Information on these system may be found at http://www.hawkboard.org.
Basic support for the UART console is included in this patch.
It's tested with latest Angstrom File Systems like ramdisk
from http://alturl.com/imb45.
Signed-off-by: Victor Rodriguez <victor.rodriguez@sasken.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>

arch/arm/configs/da8xx_omapl_defconfig

@@ -18,6 +18,7 @@ CONFIG_ARCH_DAVINCI=y
 CONFIG_ARCH_DAVINCI_DA830=y
 CONFIG_ARCH_DAVINCI_DA850=y
 CONFIG_MACH_MITYOMAPL138=y
+CONFIG_MACH_OMAPL138_HAWKBOARD=y
 CONFIG_DAVINCI_RESET_CLOCKS=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y

arch/arm/mach-davinci/Kconfig

@@ -193,6 +193,14 @@ config MACH_MITYOMAPL138
 	  System on Module.  Information on this SoM may be found at
 	  http://www.mitydsp.com
 
+config MACH_OMAPL138_HAWKBOARD
+	bool "TI AM1808 / OMAPL-138 Hawkboard platform"
+	depends on ARCH_DAVINCI_DA850
+	help
+	  Say Y here to select the TI AM1808 / OMAPL-138 Hawkboard platform .
+	  Information of this board may be found at
+	  http://www.hawkboard.org/
+
 config DAVINCI_MUX
 	bool "DAVINCI multiplexing support"
 	depends on ARCH_DAVINCI

arch/arm/mach-davinci/Makefile

@@ -34,6 +34,7 @@ obj-$(CONFIG_MACH_DAVINCI_DA830_EVM)	+= board-da830-evm.o
 obj-$(CONFIG_MACH_DAVINCI_DA850_EVM)	+= board-da850-evm.o
 obj-$(CONFIG_MACH_TNETV107X)		+= board-tnetv107x-evm.o
 obj-$(CONFIG_MACH_MITYOMAPL138)		+= board-mityomapl138.o
+obj-$(CONFIG_MACH_OMAPL138_HAWKBOARD)	+= board-omapl138-hawk.o
 
 # Power Management
 obj-$(CONFIG_CPU_FREQ)			+= cpufreq.o

arch/arm/mach-davinci/board-omapl138-hawk.c

+/*
+ * Hawkboard.org based on TI's OMAP-L138 Platform
+ *
+ * Initial code: Syed Mohammed Khasim
+ *
+ * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of
+ * any kind, whether express or implied.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/cp_intc.h>
+#include <mach/da8xx.h>
+
+static struct davinci_uart_config omapl138_hawk_uart_config __initdata = {
+	.enabled_uarts = 0x7,
+};
+
+static __init void omapl138_hawk_init(void)
+{
+	int ret;
+
+	davinci_serial_init(&omapl138_hawk_uart_config);
+
+	ret = da8xx_register_watchdog();
+	if (ret)
+		pr_warning("omapl138_hawk_init: "
+			"watchdog registration failed: %d\n",
+			ret);
+}
+
+#ifdef CONFIG_SERIAL_8250_CONSOLE
+static int __init omapl138_hawk_console_init(void)
+{
+	if (!machine_is_omapl138_hawkboard())
+		return 0;
+
+	return add_preferred_console("ttyS", 2, "115200");
+}
+console_initcall(omapl138_hawk_console_init);
+#endif
+
+static void __init omapl138_hawk_map_io(void)
+{
+	da850_init();
+}
+
+MACHINE_START(OMAPL138_HAWKBOARD, "AM18x/OMAP-L138 Hawkboard")
+	.phys_io	= IO_PHYS,
+	.io_pg_offst	= (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
+	.boot_params	= (DA8XX_DDR_BASE + 0x100),
+	.map_io		= omapl138_hawk_map_io,
+	.init_irq	= cp_intc_init,
+	.timer		= &davinci_timer,
+	.init_machine	= omapl138_hawk_init,
+MACHINE_END

arch/arm/mach-davinci/include/mach/uncompress.h

@@ -89,6 +89,7 @@ static inline void __arch_decomp_setup(unsigned long arch_id)
 		DEBUG_LL_DA8XX(davinci_da830_evm,	2);
 		DEBUG_LL_DA8XX(davinci_da850_evm,	2);
 		DEBUG_LL_DA8XX(mityomapl138,		1);
+		DEBUG_LL_DA8XX(omapl138_hawkboard,	2);
 
 		/* TNETV107x boards */
 		DEBUG_LL_TNETV107X(tnetv107x,		1);