Commit 6c76c0eb authored by Sean Paul's avatar Sean Paul

drm/bridge: ti-sn65dsi86: Fixup register names

Order registers by offset and rename bits & masks to match the
datasheet. This makes the driver a bit easier to grok and
cross-reference with the datasheet.

Changes in v3:
- Added to the set

Cc: Sandeep Panda <spanda@codeaurora.org>
Reviewed-by: default avatarSandeep Panda <spanda@codeaurora.org>
Signed-off-by: default avatarSean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180813213058.184821-3-sean@poorly.run
parent ea24a622
......@@ -18,36 +18,51 @@
#include <linux/regmap.h>
#include <linux/regulator/consumer.h>
/* Link Training specific registers */
#define SN_DEVICE_REV_REG 0x08
#define SN_HPD_DISABLE_REG 0x5C
#define SN_DPPLL_SRC_REG 0x0A
#define DPPLL_CLK_SRC_DSICLK BIT(0)
#define REFCLK_FREQ_MASK GENMASK(3, 1)
#define REFCLK_FREQ(x) ((x) << 1)
#define DPPLL_SRC_DP_PLL_LOCK BIT(7)
#define SN_PLL_ENABLE_REG 0x0D
#define SN_DSI_LANES_REG 0x10
#define CHA_DSI_LANES_MASK GENMASK(4, 3)
#define CHA_DSI_LANES(x) ((x) << 3)
#define SN_DSIA_CLK_FREQ_REG 0x12
#define SN_ENH_FRAME_REG 0x5A
#define SN_SSC_CONFIG_REG 0x93
#define SN_DATARATE_CONFIG_REG 0x94
#define SN_PLL_ENABLE_REG 0x0D
#define SN_SCRAMBLE_CONFIG_REG 0x95
#define SN_AUX_WDATA0_REG 0x64
#define SN_AUX_ADDR_19_16_REG 0x74
#define SN_AUX_ADDR_15_8_REG 0x75
#define SN_AUX_ADDR_7_0_REG 0x76
#define SN_AUX_LENGTH_REG 0x77
#define SN_AUX_CMD_REG 0x78
#define SN_ML_TX_MODE_REG 0x96
/* video config specific registers */
#define SN_CHA_ACTIVE_LINE_LENGTH_LOW_REG 0x20
#define SN_CHA_VERTICAL_DISPLAY_SIZE_LOW_REG 0x24
#define SN_CHA_HSYNC_PULSE_WIDTH_LOW_REG 0x2C
#define SN_CHA_HSYNC_PULSE_WIDTH_HIGH_REG 0x2D
#define CHA_HSYNC_POLARITY BIT(7)
#define SN_CHA_VSYNC_PULSE_WIDTH_LOW_REG 0x30
#define SN_CHA_VSYNC_PULSE_WIDTH_HIGH_REG 0x31
#define CHA_VSYNC_POLARITY BIT(7)
#define SN_CHA_HORIZONTAL_BACK_PORCH_REG 0x34
#define SN_CHA_VERTICAL_BACK_PORCH_REG 0x36
#define SN_CHA_HORIZONTAL_FRONT_PORCH_REG 0x38
#define SN_CHA_VERTICAL_FRONT_PORCH_REG 0x3A
#define SN_ENH_FRAME_REG 0x5A
#define VSTREAM_ENABLE BIT(3)
#define SN_DATA_FORMAT_REG 0x5B
#define SN_HPD_DISABLE_REG 0x5C
#define HPD_DISABLE BIT(0)
#define SN_AUX_WDATA0_REG 0x64
#define SN_AUX_ADDR_19_16_REG 0x74
#define SN_AUX_ADDR_15_8_REG 0x75
#define SN_AUX_ADDR_7_0_REG 0x76
#define SN_AUX_LENGTH_REG 0x77
#define SN_AUX_CMD_REG 0x78
#define AUX_CMD_SEND BIT(1)
#define AUX_CMD_REQ(x) ((x) << 4)
#define SN_SSC_CONFIG_REG 0x93
#define DP_NUM_LANES_MASK GENMASK(5, 4)
#define DP_NUM_LANES(x) ((x) << 4)
#define SN_DATARATE_CONFIG_REG 0x94
#define DP_DATARATE_MASK GENMASK(7, 5)
#define DP_DATARATE(x) ((x) << 5)
#define SN_ML_TX_MODE_REG 0x96
#define ML_TX_MAIN_LINK_OFF 0
#define ML_TX_NORMAL_MODE BIT(0)
#define MIN_DSI_CLK_FREQ_MHZ 40
......@@ -55,22 +70,6 @@
#define DP_CLK_FUDGE_NUM 10
#define DP_CLK_FUDGE_DEN 8
#define DPPLL_CLK_SRC_REFCLK 0
#define DPPLL_CLK_SRC_DSICLK 1
#define SN_REFCLK_FREQ_OFFSET 1
#define SN_DSIA_LANE_OFFSET 3
#define SN_DP_LANE_OFFSET 4
#define SN_DP_DATA_RATE_OFFSET 5
#define SN_SYNC_POLARITY_OFFSET 7
#define SN_ENABLE_VID_STREAM_BIT BIT(3)
#define SN_REFCLK_FREQ_BITS GENMASK(3, 1)
#define SN_DSIA_NUM_LANES_BITS GENMASK(4, 3)
#define SN_DP_NUM_LANES_BITS GENMASK(5, 4)
#define SN_DP_DATA_RATE_BITS GENMASK(7, 5)
#define SN_HPD_DISABLE_BIT BIT(0)
#define SN_REGULATOR_SUPPLY_NUM 4
struct ti_sn_bridge {
......@@ -299,8 +298,7 @@ static void ti_sn_bridge_disable(struct drm_bridge *bridge)
drm_panel_disable(pdata->panel);
/* disable video stream */
regmap_update_bits(pdata->regmap, SN_ENH_FRAME_REG,
SN_ENABLE_VID_STREAM_BIT, 0);
regmap_update_bits(pdata->regmap, SN_ENH_FRAME_REG, VSTREAM_ENABLE, 0);
/* semi auto link training mode OFF */
regmap_write(pdata->regmap, SN_ML_TX_MODE_REG, 0);
/* disable DP PLL */
......@@ -363,8 +361,8 @@ static void ti_sn_bridge_set_refclk_freq(struct ti_sn_bridge *pdata)
if (refclk_lut[i] == refclk_rate)
break;
regmap_update_bits(pdata->regmap, SN_DPPLL_SRC_REG,
SN_REFCLK_FREQ_BITS, i << SN_REFCLK_FREQ_OFFSET);
regmap_update_bits(pdata->regmap, SN_DPPLL_SRC_REG, REFCLK_FREQ_MASK,
REFCLK_FREQ(i));
}
/**
......@@ -401,7 +399,7 @@ static void ti_sn_bridge_set_dsi_dp_rate(struct ti_sn_bridge *pdata)
break;
regmap_update_bits(pdata->regmap, SN_DATARATE_CONFIG_REG,
SN_DP_DATA_RATE_BITS, i << SN_DP_DATA_RATE_OFFSET);
DP_DATARATE_MASK, DP_DATARATE(i));
}
static void ti_sn_bridge_set_video_timings(struct ti_sn_bridge *pdata)
......@@ -411,9 +409,9 @@ static void ti_sn_bridge_set_video_timings(struct ti_sn_bridge *pdata)
u8 hsync_polarity = 0, vsync_polarity = 0;
if (mode->flags & DRM_MODE_FLAG_PHSYNC)
hsync_polarity = BIT(SN_SYNC_POLARITY_OFFSET);
hsync_polarity = CHA_HSYNC_POLARITY;
if (mode->flags & DRM_MODE_FLAG_PVSYNC)
vsync_polarity = BIT(SN_SYNC_POLARITY_OFFSET);
vsync_polarity = CHA_VSYNC_POLARITY;
ti_sn_bridge_write_u16(pdata, SN_CHA_ACTIVE_LINE_LENGTH_LOW_REG,
mode->hdisplay);
......@@ -451,14 +449,14 @@ static void ti_sn_bridge_enable(struct drm_bridge *bridge)
drm_panel_prepare(pdata->panel);
/* DSI_A lane config */
val = (4 - pdata->dsi->lanes) << SN_DSIA_LANE_OFFSET;
val = CHA_DSI_LANES(4 - pdata->dsi->lanes);
regmap_update_bits(pdata->regmap, SN_DSI_LANES_REG,
SN_DSIA_NUM_LANES_BITS, val);
CHA_DSI_LANES_MASK, val);
/* DP lane config */
val = (pdata->dsi->lanes - 1) << SN_DP_LANE_OFFSET;
regmap_update_bits(pdata->regmap, SN_SSC_CONFIG_REG,
SN_DP_NUM_LANES_BITS, val);
val = DP_NUM_LANES(pdata->dsi->lanes - 1);
regmap_update_bits(pdata->regmap, SN_SSC_CONFIG_REG, DP_NUM_LANES_MASK,
val);
/* set dsi/dp clk frequency value */
ti_sn_bridge_set_dsi_dp_rate(pdata);
......@@ -489,8 +487,8 @@ static void ti_sn_bridge_enable(struct drm_bridge *bridge)
ti_sn_bridge_set_video_timings(pdata);
/* enable video stream */
regmap_update_bits(pdata->regmap, SN_ENH_FRAME_REG,
SN_ENABLE_VID_STREAM_BIT, SN_ENABLE_VID_STREAM_BIT);
regmap_update_bits(pdata->regmap, SN_ENH_FRAME_REG, VSTREAM_ENABLE,
VSTREAM_ENABLE);
drm_panel_enable(pdata->panel);
}
......@@ -505,8 +503,8 @@ static void ti_sn_bridge_pre_enable(struct drm_bridge *bridge)
ti_sn_bridge_set_refclk_freq(pdata);
/* in case drm_panel is connected then HPD is not supported */
regmap_update_bits(pdata->regmap, SN_HPD_DISABLE_REG,
SN_HPD_DISABLE_BIT, SN_HPD_DISABLE_BIT);
regmap_update_bits(pdata->regmap, SN_HPD_DISABLE_REG, HPD_DISABLE,
HPD_DISABLE);
}
static void ti_sn_bridge_post_disable(struct drm_bridge *bridge)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment