Commit 6c84a60e authored by Greg Ungerer's avatar Greg Ungerer

m68knommu: make 527x QSPI platform addressing consistent

If we make all QSPI (SPI protocol) addressing consistent across all ColdFire
family members then we will be able to remove the duplicated plaform data
and code and use a single setup for all.

So modify the ColdFire 527x QSPI addressing so that:

. base addresses are absolute (not relative to MBAR peripheral register)
. use a common name for IRQs used
. move chip select definitions (CS) to appropriate header
Signed-off-by: default avatarGreg Ungerer <gerg@uclinux.org>
parent 2424f549
...@@ -59,6 +59,8 @@ ...@@ -59,6 +59,8 @@
#define MCF_IRQ_FECTX1 (MCFINT2_VECBASE + MCFINT2_FECTX1) #define MCF_IRQ_FECTX1 (MCFINT2_VECBASE + MCFINT2_FECTX1)
#define MCF_IRQ_FECENTC1 (MCFINT2_VECBASE + MCFINT2_FECENTC1) #define MCF_IRQ_FECENTC1 (MCFINT2_VECBASE + MCFINT2_FECENTC1)
#define MCF_IRQ_QSPI (MCFINT_VECBASE + MCFINT_QSPI)
/* /*
* SDRAM configuration registers. * SDRAM configuration registers.
*/ */
...@@ -103,6 +105,28 @@ ...@@ -103,6 +105,28 @@
#define MCFFEC_BASE1 (MCF_IPSBAR + 0x1800) #define MCFFEC_BASE1 (MCF_IPSBAR + 0x1800)
#define MCFFEC_SIZE1 0x800 #define MCFFEC_SIZE1 0x800
/*
* QSPI module.
*/
#define MCFQSPI_BASE (MCF_IPSBAR + 0x340)
#define MCFQSPI_SIZE 0x40
#ifdef CONFIG_M5271
#define MCFQSPI_CS0 91
#define MCFQSPI_CS1 92
#define MCFQSPI_CS2 99
#define MCFQSPI_CS3 103
#endif
#ifdef CONFIG_M5275
#define MCFQSPI_CS0 59
#define MCFQSPI_CS1 60
#define MCFQSPI_CS2 61
#define MCFQSPI_CS3 62
#endif
/*
* GPIO module.
*/
#ifdef CONFIG_M5271 #ifdef CONFIG_M5271
#define MCFGPIO_PODR_ADDR (MCF_IPSBAR + 0x100000) #define MCFGPIO_PODR_ADDR (MCF_IPSBAR + 0x100000)
#define MCFGPIO_PODR_DATAH (MCF_IPSBAR + 0x100001) #define MCFGPIO_PODR_DATAH (MCF_IPSBAR + 0x100001)
......
...@@ -21,7 +21,7 @@ ...@@ -21,7 +21,7 @@
#ifndef mcfqspi_h #ifndef mcfqspi_h
#define mcfqspi_h #define mcfqspi_h
#if defined(CONFIG_M527x) || defined(CONFIG_M528x) #if defined(CONFIG_M528x)
#define MCFQSPI_IOBASE (MCF_IPSBAR + 0x340) #define MCFQSPI_IOBASE (MCF_IPSBAR + 0x340)
#elif defined(CONFIG_M532x) #elif defined(CONFIG_M532x)
#define MCFQSPI_IOBASE 0xFC058000 #define MCFQSPI_IOBASE 0xFC058000
......
...@@ -29,29 +29,17 @@ ...@@ -29,29 +29,17 @@
#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE) #if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
static struct resource m527x_qspi_resources[] = { static struct resource m527x_qspi_resources[] = {
{ {
.start = MCFQSPI_IOBASE, .start = MCFQSPI_BASE,
.end = MCFQSPI_IOBASE + MCFQSPI_IOSIZE - 1, .end = MCFQSPI_BASE + MCFQSPI_SIZE - 1,
.flags = IORESOURCE_MEM, .flags = IORESOURCE_MEM,
}, },
{ {
.start = MCFINT_VECBASE + MCFINT_QSPI, .start = MCF_IRQ_QSPI,
.end = MCFINT_VECBASE + MCFINT_QSPI, .end = MCF_IRQ_QSPI,
.flags = IORESOURCE_IRQ, .flags = IORESOURCE_IRQ,
}, },
}; };
#if defined(CONFIG_M5271)
#define MCFQSPI_CS0 91
#define MCFQSPI_CS1 92
#define MCFQSPI_CS2 99
#define MCFQSPI_CS3 103
#elif defined(CONFIG_M5275)
#define MCFQSPI_CS0 59
#define MCFQSPI_CS1 60
#define MCFQSPI_CS2 61
#define MCFQSPI_CS3 62
#endif
static int m527x_cs_setup(struct mcfqspi_cs_control *cs_control) static int m527x_cs_setup(struct mcfqspi_cs_control *cs_control)
{ {
int status; int status;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment