Commit 6d446ec3 authored by Gavin Shan's avatar Gavin Shan Committed by David S. Miller

net/tg3: Avoid delay during MMIO access

When the EEH error is the result of a fenced host bridge, MMIO accesses
can be very slow (milliseconds) to timeout and return all 1's,
thus causing the driver various timeout loops to take way too long and
trigger soft-lockup warnings (in addition to taking minutes to recover).

It might be worthwhile to check if for any of these cases, ffffffff is
a valid possible value, and if not, bail early since that means the HW
is either gone or isolated. In the meantime, checking that the PCI channel
is offline would be workaround of the problem.

Cc: <stable@vger.kernel.org> # v3.0+
Signed-off-by: default avatarGavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent dc848292
......@@ -744,6 +744,9 @@ static int tg3_ape_lock(struct tg3 *tp, int locknum)
status = tg3_ape_read32(tp, gnt + off);
if (status == bit)
break;
if (pci_channel_offline(tp->pdev))
break;
udelay(10);
}
......@@ -1635,6 +1638,9 @@ static void tg3_wait_for_event_ack(struct tg3 *tp)
for (i = 0; i < delay_cnt; i++) {
if (!(tr32(GRC_RX_CPU_EVENT) & GRC_RX_CPU_DRIVER_EVENT))
break;
if (pci_channel_offline(tp->pdev))
break;
udelay(8);
}
}
......@@ -1813,6 +1819,9 @@ static int tg3_poll_fw(struct tg3 *tp)
for (i = 0; i < 200; i++) {
if (tr32(VCPU_STATUS) & VCPU_STATUS_INIT_DONE)
return 0;
if (pci_channel_offline(tp->pdev))
return -ENODEV;
udelay(100);
}
return -ENODEV;
......@@ -1823,6 +1832,15 @@ static int tg3_poll_fw(struct tg3 *tp)
tg3_read_mem(tp, NIC_SRAM_FIRMWARE_MBOX, &val);
if (val == ~NIC_SRAM_FIRMWARE_MBOX_MAGIC1)
break;
if (pci_channel_offline(tp->pdev)) {
if (!tg3_flag(tp, NO_FWARE_REPORTED)) {
tg3_flag_set(tp, NO_FWARE_REPORTED);
netdev_info(tp->dev, "No firmware running\n");
}
break;
}
udelay(10);
}
......@@ -3520,6 +3538,8 @@ static int tg3_pause_cpu(struct tg3 *tp, u32 cpu_base)
tw32(cpu_base + CPU_MODE, CPU_MODE_HALT);
if (tr32(cpu_base + CPU_MODE) & CPU_MODE_HALT)
break;
if (pci_channel_offline(tp->pdev))
return -EBUSY;
}
return (i == iters) ? -EBUSY : 0;
......@@ -8589,6 +8609,14 @@ static int tg3_stop_block(struct tg3 *tp, unsigned long ofs, u32 enable_bit, boo
tw32_f(ofs, val);
for (i = 0; i < MAX_WAIT_CNT; i++) {
if (pci_channel_offline(tp->pdev)) {
dev_err(&tp->pdev->dev,
"tg3_stop_block device offline, "
"ofs=%lx enable_bit=%x\n",
ofs, enable_bit);
return -ENODEV;
}
udelay(100);
val = tr32(ofs);
if ((val & enable_bit) == 0)
......@@ -8612,6 +8640,13 @@ static int tg3_abort_hw(struct tg3 *tp, bool silent)
tg3_disable_ints(tp);
if (pci_channel_offline(tp->pdev)) {
tp->rx_mode &= ~(RX_MODE_ENABLE | TX_MODE_ENABLE);
tp->mac_mode &= ~MAC_MODE_TDE_ENABLE;
err = -ENODEV;
goto err_no_dev;
}
tp->rx_mode &= ~RX_MODE_ENABLE;
tw32_f(MAC_RX_MODE, tp->rx_mode);
udelay(10);
......@@ -8660,6 +8695,7 @@ static int tg3_abort_hw(struct tg3 *tp, bool silent)
err |= tg3_stop_block(tp, BUFMGR_MODE, BUFMGR_MODE_ENABLE, silent);
err |= tg3_stop_block(tp, MEMARB_MODE, MEMARB_MODE_ENABLE, silent);
err_no_dev:
for (i = 0; i < tp->irq_cnt; i++) {
struct tg3_napi *tnapi = &tp->napi[i];
if (tnapi->hw_status)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment