Commit 6d6e44a9 authored by Nicolas Boichat's avatar Nicolas Boichat Committed by Lee Jones

mfd: cros ec: Lock the SPI bus while holding chipselect

cros_ec_cmd_xfer_spi and cros_ec_pkt_xfer_spi generally work like
this:
 - Pull CS down (active), wait a bit, then send a command
 - Wait for response (multiple requests)
 - Wait a while, pull CS up (inactive)

These operations, individually, lock the SPI bus, but there is
nothing preventing the SPI framework from interleaving messages
intended for other devices as the bus is unlocked in between.

This is a problem as the EC expects CS to be held low for the
whole duration.

Solution: Lock the SPI bus during the whole transaction, to make
sure that no other messages can be interleaved.
Signed-off-by: default avatarNicolas Boichat <drinkcat@chromium.org>
Reviewed-by: default avatarGwendal Grignou <gwendal@chromium.org>
Signed-off-by: default avatarLee Jones <lee.jones@linaro.org>
parent 12ebc137
......@@ -113,7 +113,7 @@ static int terminate_request(struct cros_ec_device *ec_dev)
trans.delay_usecs = ec_spi->end_of_msg_delay;
spi_message_add_tail(&trans, &msg);
ret = spi_sync(ec_spi->spi, &msg);
ret = spi_sync_locked(ec_spi->spi, &msg);
/* Reset end-of-response timer */
ec_spi->last_transfer_ns = ktime_get_ns();
......@@ -147,7 +147,7 @@ static int receive_n_bytes(struct cros_ec_device *ec_dev, u8 *buf, int n)
spi_message_init(&msg);
spi_message_add_tail(&trans, &msg);
ret = spi_sync(ec_spi->spi, &msg);
ret = spi_sync_locked(ec_spi->spi, &msg);
if (ret < 0)
dev_err(ec_dev->dev, "spi transfer failed: %d\n", ret);
......@@ -391,10 +391,10 @@ static int cros_ec_pkt_xfer_spi(struct cros_ec_device *ec_dev,
}
rx_buf = kzalloc(len, GFP_KERNEL);
if (!rx_buf) {
ret = -ENOMEM;
goto exit;
}
if (!rx_buf)
return -ENOMEM;
spi_bus_lock(ec_spi->spi->master);
/*
* Leave a gap between CS assertion and clocking of data to allow the
......@@ -414,7 +414,7 @@ static int cros_ec_pkt_xfer_spi(struct cros_ec_device *ec_dev,
trans.len = len;
trans.cs_change = 1;
spi_message_add_tail(&trans, &msg);
ret = spi_sync(ec_spi->spi, &msg);
ret = spi_sync_locked(ec_spi->spi, &msg);
/* Get the response */
if (!ret) {
......@@ -440,6 +440,9 @@ static int cros_ec_pkt_xfer_spi(struct cros_ec_device *ec_dev,
}
final_ret = terminate_request(ec_dev);
spi_bus_unlock(ec_spi->spi->master);
if (!ret)
ret = final_ret;
if (ret < 0)
......@@ -520,10 +523,10 @@ static int cros_ec_cmd_xfer_spi(struct cros_ec_device *ec_dev,
}
rx_buf = kzalloc(len, GFP_KERNEL);
if (!rx_buf) {
ret = -ENOMEM;
goto exit;
}
if (!rx_buf)
return -ENOMEM;
spi_bus_lock(ec_spi->spi->master);
/* Transmit phase - send our message */
debug_packet(ec_dev->dev, "out", ec_dev->dout, len);
......@@ -534,7 +537,7 @@ static int cros_ec_cmd_xfer_spi(struct cros_ec_device *ec_dev,
trans.cs_change = 1;
spi_message_init(&msg);
spi_message_add_tail(&trans, &msg);
ret = spi_sync(ec_spi->spi, &msg);
ret = spi_sync_locked(ec_spi->spi, &msg);
/* Get the response */
if (!ret) {
......@@ -560,6 +563,9 @@ static int cros_ec_cmd_xfer_spi(struct cros_ec_device *ec_dev,
}
final_ret = terminate_request(ec_dev);
spi_bus_unlock(ec_spi->spi->master);
if (!ret)
ret = final_ret;
if (ret < 0)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment