Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

Pull input updates from Dmitry Torokhov:
 "Small driver fixups"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: elants_i2c - avoid divide by 0 errors on bad touchscreen data
  Input: adxl34x - make it enumerable in ACPI environment
  Input: ALPS - fix TrackStick Y axis handling for SS5 hardware
  Input: synaptics-rmi4 - fix F03 build error when serio is module
  Input: xpad - use correct product id for x360w controllers
  Input: synaptics_i2c - change msleep to usleep_range for small msecs
  Input: i8042 - add Pegatron touchpad to noloop table
  Input: joydev - remove unused linux/miscdevice.h include

drivers/input/joydev.c

@@ -22,7 +22,6 @@
 #include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/mm.h>
-#include <linux/miscdevice.h>
 #include <linux/module.h>
 #include <linux/poll.h>
 #include <linux/init.h>

drivers/input/joystick/xpad.c

@@ -1377,6 +1377,12 @@ static int xpad_init_input(struct usb_xpad *xpad)
 	input_dev->name = xpad->name;
 	input_dev->phys = xpad->phys;
 	usb_to_input_id(xpad->udev, &input_dev->id);
+
+	if (xpad->xtype == XTYPE_XBOX360W) {
+		/* x360w controllers and the receiver have different ids */
+		input_dev->id.product = 0x02a1;
+	}
+
 	input_dev->dev.parent = &xpad->intf->dev;
 
 	input_set_drvdata(input_dev, xpad);

drivers/input/misc/adxl34x-i2c.c

@@ -136,7 +136,6 @@ static const struct i2c_device_id adxl34x_id[] = {
 
 MODULE_DEVICE_TABLE(i2c, adxl34x_id);
 
-#ifdef CONFIG_OF
 static const struct of_device_id adxl34x_of_id[] = {
 	/*
 	 * The ADXL346 is backward-compatible with the ADXL345. Differences are
@@ -153,13 +152,12 @@ static const struct of_device_id adxl34x_of_id[] = {
 };
 
 MODULE_DEVICE_TABLE(of, adxl34x_of_id);
-#endif
 
 static struct i2c_driver adxl34x_driver = {
 	.driver = {
 		.name = "adxl34x",
 		.pm = &adxl34x_i2c_pm,
-		.of_match_table = of_match_ptr(adxl34x_of_id),
+		.of_match_table = adxl34x_of_id,
 	},
 	.probe    = adxl34x_i2c_probe,
 	.remove   = adxl34x_i2c_remove,

drivers/input/mouse/alps.h

@@ -114,7 +114,7 @@ enum SS4_PACKET_ID {
 				 (_b[1] & 0x7F)		\
 				)
 
-#define SS4_TS_Y_V2(_b)		(s8)(				\
+#define SS4_TS_Y_V2(_b)		-(s8)(				\
 				 ((_b[3] & 0x01) << 7) |	\
 				 (_b[2] & 0x7F)		\
 				)

drivers/input/mouse/synaptics_i2c.c

@@ -29,7 +29,7 @@
  * after soft reset, we should wait for 1 ms
  * before the device becomes operational
  */
-#define SOFT_RESET_DELAY_MS	3
+#define SOFT_RESET_DELAY_US	3000
 /* and after hard reset, we should wait for max 500ms */
 #define HARD_RESET_DELAY_MS	500
 
@@ -311,7 +311,7 @@ static int synaptics_i2c_reset_config(struct i2c_client *client)
 	if (ret) {
 		dev_err(&client->dev, "Unable to reset device\n");
 	} else {
-		msleep(SOFT_RESET_DELAY_MS);
+		usleep_range(SOFT_RESET_DELAY_US, SOFT_RESET_DELAY_US + 100);
 		ret = synaptics_i2c_config(client);
 		if (ret)
 			dev_err(&client->dev, "Unable to config device\n");

drivers/input/rmi4/Kconfig

@@ -41,7 +41,8 @@ config RMI4_SMB
 
 config RMI4_F03
         bool "RMI4 Function 03 (PS2 Guest)"
-        depends on RMI4_CORE && SERIO
+	depends on RMI4_CORE
+	depends on SERIO=y || RMI4_CORE=SERIO
         help
           Say Y here if you want to add support for RMI4 function 03.
 

drivers/input/serio/i8042-x86ia64io.h

@@ -211,6 +211,12 @@ static const struct dmi_system_id __initconst i8042_dmi_noloop_table[] = {
 			DMI_MATCH(DMI_PRODUCT_VERSION, "Rev 1"),
 		},
 	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "PEGATRON CORPORATION"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "C15B"),
+		},
+	},
 	{ }
 };
 

drivers/input/touchscreen/elants_i2c.c

@@ -914,9 +914,9 @@ static irqreturn_t elants_i2c_irq(int irq, void *_dev)
 
 		case QUEUE_HEADER_NORMAL:
 			report_count = ts->buf[FW_HDR_COUNT];
-			if (report_count > 3) {
+			if (report_count == 0 || report_count > 3) {
 				dev_err(&client->dev,
-					"too large report count: %*ph\n",
+					"bad report count: %*ph\n",
 					HEADER_SIZE, ts->buf);
 				break;
 			}