Commit 6de57233 authored by Marco Franchi's avatar Marco Franchi Committed by Shawn Guo

ARM: dts: imx: Pass empty memory size on board dts

In preparation for removing 'reg = <0 0>;' from the dtsi SoC files, pass
'reg = <0 0 >;' to the dts/dtsi board files that do not pass the memory
size.
Signed-off-by: default avatarMarco Franchi <marco.franchi@nxp.com>
Reviewed-by: default avatarFabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: default avatarShawn Guo <shawnguo@kernel.org>
parent bf455670
......@@ -51,6 +51,11 @@ chosen {
stdout-path = &uart1;
};
/* Will be filled by the bootloader */
memory {
reg = <0 0>;
};
aliases {
mdio-gpio0 = &mdio_gpio;
rtc0 = &ds1341;
......
......@@ -49,6 +49,11 @@ / {
model = "Ka-Ro electronics TX53 module";
compatible = "karo,tx53", "fsl,imx53";
/* Will be filled by the bootloader */
memory {
reg = <0 0>;
};
aliases {
can0 = &can2; /* Make the can interface indices consistent with TX28/TX48 modules */
can1 = &can1;
......
......@@ -53,6 +53,11 @@ / {
compatible = "toradex,colibri_imx6dl-eval-v3", "toradex,colibri_imx6dl",
"fsl,imx6dl";
/* Will be filled by the bootloader */
memory {
reg = <0 0>;
};
aliases {
i2c0 = &i2c2;
i2c1 = &i2c3;
......
......@@ -20,4 +20,9 @@
/ {
model = "DFI FS700-M60-6DL i.MX6dl Q7 Board";
compatible = "dfi,fs700-m60-6dl", "dfi,fs700e-m60", "fsl,imx6dl";
/* Will be filled by the bootloader */
memory {
reg = <0 0>;
};
};
......@@ -46,4 +46,9 @@
/ {
model = "Technologic Systems i.MX6 Solo/DualLite TS-4900 (Default Device Tree)";
compatible = "technologic,imx6dl-ts4900", "fsl,imx6dl";
/* Will be filled by the bootloader */
memory {
reg = <0 0>;
};
};
......@@ -47,4 +47,9 @@
/ {
model = "Technologic Systems i.MX6 Solo/DualLite TS-7970 (Default Device Tree)";
compatible = "technologic,imx6dl-ts7970", "fsl,imx6dl";
/* Will be filled by the bootloader */
memory {
reg = <0 0>;
};
};
......@@ -20,4 +20,9 @@
/ {
model = "DFI FS700-M60-6QD i.MX6qd Q7 Board";
compatible = "dfi,fs700-m60-6qd", "dfi,fs700e-m60", "fsl,imx6q";
/* Will be filled by the bootloader */
memory {
reg = <0 0>;
};
};
......@@ -49,6 +49,11 @@ / {
model = "Auvidea H100";
compatible = "auvidea,h100", "fsl,imx6q";
/* Will be filled by the bootloader */
memory {
reg = <0 0>;
};
aliases {
rtc0 = &rtc;
rtc1 = &snvs_rtc;
......
......@@ -55,6 +55,11 @@ / {
model = "Kosagi Novena Dual/Quad";
compatible = "kosagi,imx6q-novena", "fsl,imx6q";
/* Will be filled by the bootloader */
memory {
reg = <0 0>;
};
chosen {
stdout-path = &uart2;
};
......
......@@ -46,6 +46,11 @@
/ {
model = "Technologic Systems i.MX6 Quad TS-4900 (Default Device Tree)";
compatible = "technologic,imx6q-ts4900", "fsl,imx6q";
/* Will be filled by the bootloader */
memory {
reg = <0 0>;
};
};
&sata {
......
......@@ -47,6 +47,11 @@
/ {
model = "Technologic Systems i.MX6 Quad TS-7970 (Default Device Tree)";
compatible = "technologic,imx6q-ts7970", "fsl,imx6q";
/* Will be filled by the bootloader */
memory {
reg = <0 0>;
};
};
&sata {
......
......@@ -47,4 +47,9 @@
/ {
model = "ZII RDU2 Board";
compatible = "zii,imx6q-zii-rdu2", "fsl,imx6q";
/* Will be filled by the bootloader */
memory {
reg = <0 0>;
};
};
......@@ -47,6 +47,11 @@ / {
model = "Toradex Apalis iMX6Q/D Module";
compatible = "toradex,apalis_imx6q", "fsl,imx6q";
/* Will be filled by the bootloader */
memory {
reg = <0 0>;
};
backlight: backlight {
compatible = "pwm-backlight";
pinctrl-names = "default";
......
......@@ -42,6 +42,11 @@
#include <dt-bindings/gpio/gpio.h>
/ {
/* Will be filled by the bootloader */
memory {
reg = <0 0>;
};
ir_recv: ir-receiver {
compatible = "gpio-ir-receiver";
gpios = <&gpio3 9 1>;
......
......@@ -40,6 +40,11 @@
*/
/ {
/* Will be filled by the bootloader */
memory {
reg = <0 0>;
};
chosen {
stdout-path = &uart1;
};
......
......@@ -40,6 +40,11 @@
*/
/ {
/* Will be filled by the bootloader */
memory {
reg = <0 0>;
};
chosen {
stdout-path = &uart1;
};
......
......@@ -47,4 +47,9 @@
/ {
model = "ZII RDU2+ Board";
compatible = "zii,imx6qp-zii-rdu2", "fsl,imx6qp";
/* Will be filled by the bootloader */
memory {
reg = <0 0>;
};
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment