Commit 6e493882 authored by Daniel Ritz's avatar Daniel Ritz Committed by Dominik Brodowski

[PATCH] pcmcia: cleanup cs.c, reduce size

kill the socket_shutdown()/shutdown_socket() confusion by making it
one single function. move cs_socket_put() in there. nicer to read and
smaller:

original:
   text	   data	    bss	    dec	    hex	filename
  25181	   1076	     32	  26289	   66b1	drivers/pcmcia/pcmcia_core.ko

patched:
   text	   data	    bss	    dec	    hex	filename
  24973	   1076	     32	  26081	   65e1	drivers/pcmcia/pcmcia_core.ko
Signed-off-by: default avatarDaniel Ritz <daniel.ritz@gmx.ch>
Signed-off-by: default avatarDominik Brodowski <linux@dominikbrodowski.net>
parent 3cf89b18
......@@ -309,41 +309,6 @@ struct pcmcia_socket * pcmcia_get_socket_by_nr(unsigned int nr)
}
EXPORT_SYMBOL(pcmcia_get_socket_by_nr);
/**
* socket_setup() and shutdown_socket() are called by the main event
* handler when card insertion and removal events are received.
* socket_setup() turns on socket power and resets the socket, in two stages.
* shutdown_socket() unconfigures a socket and turns off socket power.
*/
static void shutdown_socket(struct pcmcia_socket *s)
{
cs_dbg(s, 1, "shutdown_socket\n");
/* Blank out the socket state */
s->socket = dead_socket;
s->ops->init(s);
s->ops->set_socket(s, &s->socket);
s->irq.AssignedIRQ = s->irq.Config = 0;
s->lock_count = 0;
destroy_cis_cache(s);
#ifdef CONFIG_CARDBUS
cb_free(s);
#endif
s->functions = 0;
kfree(s->config);
s->config = NULL;
{
int status;
s->ops->get_status(s, &status);
if (status & SS_POWERON) {
printk(KERN_ERR "PCMCIA: socket %p: *** DANGER *** unable to remove socket power\n", s);
}
}
} /* shutdown_socket */
/**
* The central event handler. Send_event() sends an event to the
* 16-bit subsystem, which then calls the relevant device drivers.
......@@ -383,17 +348,6 @@ static void socket_remove_drivers(struct pcmcia_socket *skt)
send_event(skt, CS_EVENT_CARD_REMOVAL, CS_EVENT_PRI_HIGH);
}
static void socket_shutdown(struct pcmcia_socket *skt)
{
cs_dbg(skt, 4, "shutdown\n");
socket_remove_drivers(skt);
skt->state &= SOCKET_INUSE|SOCKET_PRESENT;
msleep(shutdown_delay * 10);
skt->state &= SOCKET_INUSE;
shutdown_socket(skt);
}
static int socket_reset(struct pcmcia_socket *skt)
{
int status, i;
......@@ -424,6 +378,45 @@ static int socket_reset(struct pcmcia_socket *skt)
return CS_GENERAL_FAILURE;
}
/**
* socket_setup() and socket_shutdown() are called by the main event handler
* when card insertion and removal events are received.
* socket_setup() turns on socket power and resets the socket, in two stages.
* socket_shutdown() unconfigures a socket and turns off socket power.
*/
static void socket_shutdown(struct pcmcia_socket *s)
{
int status;
cs_dbg(s, 4, "shutdown\n");
socket_remove_drivers(s);
s->state &= SOCKET_INUSE | SOCKET_PRESENT;
msleep(shutdown_delay * 10);
s->state &= SOCKET_INUSE;
/* Blank out the socket state */
s->socket = dead_socket;
s->ops->init(s);
s->ops->set_socket(s, &s->socket);
s->irq.AssignedIRQ = s->irq.Config = 0;
s->lock_count = 0;
destroy_cis_cache(s);
#ifdef CONFIG_CARDBUS
cb_free(s);
#endif
s->functions = 0;
kfree(s->config);
s->config = NULL;
s->ops->get_status(s, &status);
if (status & SS_POWERON) {
printk(KERN_ERR "PCMCIA: socket %p: *** DANGER *** unable to remove socket power\n", s);
}
cs_socket_put(s);
}
static int socket_setup(struct pcmcia_socket *skt, int initial_delay)
{
int status, i;
......@@ -529,7 +522,6 @@ static int socket_insert(struct pcmcia_socket *skt)
send_event(skt, CS_EVENT_CARD_INSERTION, CS_EVENT_PRI_LOW);
} else {
socket_shutdown(skt);
cs_socket_put(skt);
}
return ret;
......@@ -593,7 +585,6 @@ static int socket_resume(struct pcmcia_socket *skt)
}
} else {
socket_shutdown(skt);
cs_socket_put(skt);
}
skt->state &= ~SOCKET_SUSPEND;
......@@ -605,7 +596,6 @@ static void socket_remove(struct pcmcia_socket *skt)
{
printk(KERN_NOTICE "pccard: card ejected from slot %d\n", skt->sock);
socket_shutdown(skt);
cs_socket_put(skt);
}
/*
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment