V4L/DVB (7607): CodingStyle fixes

Signed-off-by: Douglas Schilling Landgraf <dougsland@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

drivers/media/video/em28xx/em28xx-cards.c

@@ -436,10 +436,10 @@ MODULE_DEVICE_TABLE(usb, em28xx_id_table);
 
 /* Board Hauppauge WinTV HVR 900 analog */
 struct em28xx_reg_seq hauppauge_wintv_hvr_900_analog[] = {
-	{  -1,   -1,   6},
+	{  -1,	 -1,   6},
 	{0x08, 0x2d,  10},
 	{0x08, 0x3d,   5},
-	{ -1,    -1,  -1},
+	{  -1,   -1,  -1},
 };
 /* Board Hauppauge WinTV HVR 900 digital */
 struct em28xx_reg_seq hauppauge_wintv_hvr_900_digital[] = {

drivers/media/video/em28xx/em28xx-core.c

@@ -77,12 +77,12 @@ int em28xx_read_reg_req_len(struct em28xx *dev, u8 req, u16 reg,
 			      USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
 			      0x0000, reg, buf, len, HZ);
 
-	if (reg_debug){
+	if (reg_debug) {
 		printk(ret < 0 ? " failed!\n" : "%02x values: ", ret);
-		for (byte = 0; byte < len; byte++) {
-			printk(" %02x", (unsigned char)buf[byte]);
-		}
-		printk("\n");
+		for (byte = 0; byte < len; byte++)
+			printk(KERN_INFO " %02x", (unsigned char)buf[byte]);
+
+		printk(KERN_INFO "\n");
 	}
 
 	return ret;
@@ -143,8 +143,8 @@ int em28xx_write_regs_req(struct em28xx *dev, u8 req, u16 reg, char *buf,
 	if (reg_debug) {
 		int i;
 		for (i = 0; i < len; ++i)
-			printk (" %02x", (unsigned char)buf[i]);
-		printk ("\n");
+			printk(KERN_INFO " %02x", (unsigned char)buf[i]);
+		printk(KERN_INFO "\n");
 	}
 
 	if (!bufs)
@@ -173,8 +173,12 @@ static int em28xx_write_reg_bits(struct em28xx *dev, u16 reg, u8 val,
 {
 	int oldval;
 	u8 newval;
-	if ((oldval = em28xx_read_reg(dev, reg)) < 0)
+
+	oldval = em28xx_read_reg(dev, reg);
+
+	if (oldval < 0)
 		return oldval;
+
 	newval = (((u8) oldval) & ~bitmask) | (val & bitmask);
 	return em28xx_write_regs(dev, reg, &newval, 1);
 }
@@ -187,20 +191,26 @@ static int em28xx_write_ac97(struct em28xx *dev, u8 reg, u8 *val)
 {
 	int ret, i;
 	u8 addr = reg & 0x7f;
-	if ((ret = em28xx_write_regs(dev, AC97LSB_REG, val, 2)) < 0)
+
+	ret = em28xx_write_regs(dev, AC97LSB_REG, val, 2);
+	if (ret < 0)
 		return ret;
-	if ((ret = em28xx_write_regs(dev, AC97ADDR_REG, &addr, 1)) < 0)
+
+	ret = em28xx_write_regs(dev, AC97ADDR_REG, &addr, 1);
+	if (ret < 0)
 		return ret;
 
 	/* Wait up to 50 ms for AC97 command to complete */
 	for (i = 0; i < 10; i++) {
-		if ((ret = em28xx_read_reg(dev, AC97BUSY_REG)) < 0)
+		ret = em28xx_read_reg(dev, AC97BUSY_REG);
+		if (ret < 0)
 			return ret;
+
 		if (!(ret & 0x01))
 			return 0;
 		msleep(5);
 	}
-	em28xx_warn ("AC97 command still being executed: not handled properly!\n");
+	em28xx_warn("AC97 command still being executed: not handled properly!\n");
 	return 0;
 }
 
@@ -338,11 +348,11 @@ int em28xx_capture_start(struct em28xx *dev, int start)
 	rc = em28xx_write_regs_req(dev, 0x00, 0x48, "\x00", 1);
 
 	if (dev->mode == EM28XX_ANALOG_MODE)
-		rc = em28xx_write_regs(dev, VINENABLE_REG,"\x67", 1);
+		rc = em28xx_write_regs(dev, VINENABLE_REG, "\x67", 1);
 	else
-		rc = em28xx_write_regs(dev, VINENABLE_REG,"\x37", 1);
+		rc = em28xx_write_regs(dev, VINENABLE_REG, "\x37", 1);
 
-	msleep (6);
+	msleep(6);
 
 	return rc;
 }
@@ -357,7 +367,8 @@ int em28xx_outfmt_set_yuv422(struct em28xx *dev)
 static int em28xx_accumulator_set(struct em28xx *dev, u8 xmin, u8 xmax,
 				  u8 ymin, u8 ymax)
 {
-	em28xx_coredbg("em28xx Scale: (%d,%d)-(%d,%d)\n", xmin, ymin, xmax, ymax);
+	em28xx_coredbg("em28xx Scale: (%d,%d)-(%d,%d)\n",
+			xmin, ymin, xmax, ymax);
 
 	em28xx_write_regs(dev, XMIN_REG, &xmin, 1);
 	em28xx_write_regs(dev, XMAX_REG, &xmax, 1);
@@ -372,7 +383,8 @@ static int em28xx_capture_area_set(struct em28xx *dev, u8 hstart, u8 vstart,
 	u8 cheight = height;
 	u8 overflow = (height >> 7 & 0x02) | (width >> 8 & 0x01);
 
-	em28xx_coredbg("em28xx Area Set: (%d,%d)\n", (width | (overflow & 2) << 7),
+	em28xx_coredbg("em28xx Area Set: (%d,%d)\n",
+			(width | (overflow & 2) << 7),
 			(height | (overflow & 1) << 8));
 
 	em28xx_write_regs(dev, HSTART_REG, &hstart, 1);
@@ -386,7 +398,7 @@ static int em28xx_scaler_set(struct em28xx *dev, u16 h, u16 v)
 {
 	u8 mode;
 	/* the em2800 scaler only supports scaling down to 50% */
-	if(dev->is_em2800)
+	if (dev->is_em2800)
 		mode = (v ? 0x20 : 0x00) | (h ? 0x10 : 0x00);
 	else {
 		u8 buf[2];
@@ -396,7 +408,8 @@ static int em28xx_scaler_set(struct em28xx *dev, u16 h, u16 v)
 		buf[0] = v;
 		buf[1] = v >> 8;
 		em28xx_write_regs(dev, VSCALELOW_REG, (char *)buf, 2);
-		/* it seems that both H and V scalers must be active to work correctly */
+		/* it seems that both H and V scalers must be active
+		   to work correctly */
 		mode = (h || v)? 0x30: 0x00;
 	}
 	return em28xx_write_reg_bits(dev, COMPR_REG, mode, 0x30);
@@ -449,7 +462,7 @@ int em28xx_set_alternate(struct em28xx *dev)
 			       dev->alt, dev->max_pkt_size);
 		errCode = usb_set_interface(dev->udev, 0, dev->alt);
 		if (errCode < 0) {
-			em28xx_errdev ("cannot change alternate number to %d (error=%i)\n",
+			em28xx_errdev("cannot change alternate number to %d (error=%i)\n",
 					dev->alt, errCode);
 			return errCode;
 		}
@@ -507,9 +520,9 @@ void em28xx_uninit_isoc(struct em28xx *dev)
 			usb_unlink_urb(urb);
 			if (dev->isoc_ctl.transfer_buffer[i]) {
 				usb_buffer_free(dev->udev,
-						urb->transfer_buffer_length,
-						dev->isoc_ctl.transfer_buffer[i],
-						urb->transfer_dma);
+					urb->transfer_buffer_length,
+					dev->isoc_ctl.transfer_buffer[i],
+					urb->transfer_dma);
 			}
 			usb_free_urb(urb);
 			dev->isoc_ctl.urb[i] = NULL;
@@ -596,7 +609,9 @@ int em28xx_init_isoc(struct em28xx *dev, int max_packets,
 			'desc.bEndpointAddress & USB_ENDPOINT_NUMBER_MASK'
 			should also be using 'desc.bInterval'
 		 */
-		pipe = usb_rcvisocpipe(dev->udev, cap_type == EM28XX_ANALOG_CAPTURE ? 0x82 : 0x84);
+		pipe = usb_rcvisocpipe(dev->udev,
+			cap_type == EM28XX_ANALOG_CAPTURE ? 0x82 : 0x84);
+
 		usb_fill_int_urb(urb, dev->udev, pipe,
 				 dev->isoc_ctl.transfer_buffer[i], sb_size,
 				 em28xx_irq_callback, dma_q, 1);

drivers/media/video/em28xx/em28xx-dvb.c

@@ -97,7 +97,8 @@ static inline void print_err_status(struct em28xx *dev,
 	if (packet < 0) {
 		dprintk(1, "URB status %d [%s].\n", status, errmsg);
 	} else {
-		dprintk(1, "URB packet %d, status %d [%s].\n", packet, status, errmsg);
+		dprintk(1, "URB packet %d, status %d [%s].\n",
+			packet, status, errmsg);
 	}
 }
 
@@ -134,18 +135,20 @@ static inline int dvb_isoc_copy(struct em28xx *dev, struct urb *urb)
 	return 0;
 }
 
-static int start_streaming(struct em28xx_dvb* dvb) {
+static int start_streaming(struct em28xx_dvb *dvb)
+{
 	struct em28xx *dev = dvb->adapter.priv;
 
 	usb_set_interface(dev->udev, 0, 1);
-	dev->em28xx_write_regs_req(dev,0x00,0x48,"\x00",1);
+	dev->em28xx_write_regs_req(dev, 0x00, 0x48, "\x00", 1);
 
 	return em28xx_init_isoc(dev, EM28XX_DVB_MAX_PACKETS,
 				EM28XX_DVB_NUM_BUFS, EM28XX_DVB_MAX_PACKETSIZE,
 				dvb_isoc_copy, EM28XX_DIGITAL_CAPTURE);
 }
 
-static int stop_streaming(struct em28xx_dvb* dvb) {
+static int stop_streaming(struct em28xx_dvb *dvb)
+{
 	struct em28xx *dev = dvb->adapter.priv;
 
 	em28xx_uninit_isoc(dev);
@@ -167,7 +170,8 @@ static int start_feed(struct dvb_demux_feed *feed)
 
 	if (dvb->nfeeds == 1) {
 		ret = start_streaming(dvb);
-		if(ret < 0) rc = ret;
+		if (ret < 0)
+			rc = ret;
 	}
 
 	mutex_unlock(&dvb->lock);
@@ -182,9 +186,10 @@ static int stop_feed(struct dvb_demux_feed *feed)
 
 	mutex_lock(&dvb->lock);
 	dvb->nfeeds--;
-	if (0 == dvb->nfeeds) {
+
+	if (0 == dvb->nfeeds)
 		err = stop_streaming(dvb);
-	}
+
 	mutex_unlock(&dvb->lock);
 	return err;
 }
@@ -212,7 +217,7 @@ static int attach_xc3028(u8 addr, struct em28xx *dev)
 	struct xc2028_ctrl ctl;
 	struct xc2028_config cfg;
 
-	memset (&cfg, 0, sizeof(cfg));
+	memset(&cfg, 0, sizeof(cfg));
 	cfg.i2c_adap  = &dev->i2c_adap;
 	cfg.i2c_addr  = addr;
 	cfg.ctrl      = &ctl;
@@ -360,8 +365,9 @@ static int dvb_init(struct em28xx *dev)
 	struct em28xx_dvb *dvb;
 
 	dvb = kzalloc(sizeof(struct em28xx_dvb), GFP_KERNEL);
-	if(dvb == NULL) {
-		printk("em28xx_dvb: memory allocation failed\n");
+
+	if (dvb == NULL) {
+		printk(KERN_INFO "em28xx_dvb: memory allocation failed\n");
 		return -ENOMEM;
 	}
 	dev->dvb = dvb;
@@ -410,9 +416,8 @@ static int dvb_init(struct em28xx *dev)
 	/* register everything */
 	result = register_dvb(dvb, THIS_MODULE, dev, &dev->udev->dev);
 
-	if (result < 0) {
+	if (result < 0)
 		goto out_free;
-	}
 
 	printk(KERN_INFO "Successfully loaded em28xx-dvb\n");
 	return 0;

drivers/media/video/em28xx/em28xx-i2c.c

@@ -41,11 +41,21 @@ static unsigned int i2c_debug;
 module_param(i2c_debug, int, 0644);
 MODULE_PARM_DESC(i2c_debug, "enable debug messages [i2c]");
 
-#define dprintk1(lvl,fmt, args...) if (i2c_debug>=lvl) do {\
-			printk(fmt, ##args); } while (0)
-#define dprintk2(lvl,fmt, args...) if (i2c_debug>=lvl) do{ \
-			printk(KERN_DEBUG "%s at %s: " fmt, \
-			dev->name, __func__ , ##args); } while (0)
+
+#define dprintk1(lvl, fmt, args...)			\
+do {							\
+	if (i2c_debug >= lvl) {				\
+	printk(fmt, ##args);				\
+      }							\
+} while (0)
+
+#define dprintk2(lvl, fmt, args...)			\
+do {							\
+	if (i2c_debug >= lvl) {				\
+		printk(KERN_DEBUG "%s at %s: " fmt,	\
+		       dev->name, __func__ , ##args);	\
+      } 						\
+} while (0)
 
 /*
  * em2800_i2c_send_max4()
@@ -235,16 +245,16 @@ static int em28xx_i2c_xfer(struct i2c_adapter *i2c_adap,
 		return 0;
 	for (i = 0; i < num; i++) {
 		addr = msgs[i].addr << 1;
-		dprintk2(2,"%s %s addr=%x len=%d:",
+		dprintk2(2, "%s %s addr=%x len=%d:",
 			 (msgs[i].flags & I2C_M_RD) ? "read" : "write",
 			 i == num - 1 ? "stop" : "nonstop", addr, msgs[i].len);
-		if (!msgs[i].len) {	/* no len: check only for device presence */
+		if (!msgs[i].len) { /* no len: check only for device presence */
 			if (dev->is_em2800)
 				rc = em2800_i2c_check_for_device(dev, addr);
 			else
 				rc = em28xx_i2c_check_for_device(dev, addr);
 			if (rc < 0) {
-				dprintk2(2," no device\n");
+				dprintk2(2, " no device\n");
 				return rc;
 			}
 
@@ -258,14 +268,13 @@ static int em28xx_i2c_xfer(struct i2c_adapter *i2c_adap,
 				rc = em28xx_i2c_recv_bytes(dev, addr,
 							   msgs[i].buf,
 							   msgs[i].len);
-			if (i2c_debug>=2) {
-				for (byte = 0; byte < msgs[i].len; byte++) {
+			if (i2c_debug >= 2) {
+				for (byte = 0; byte < msgs[i].len; byte++)
 					printk(" %02x", msgs[i].buf[byte]);
-				}
 			}
 		} else {
 			/* write bytes */
-			if (i2c_debug>=2) {
+			if (i2c_debug >= 2) {
 				for (byte = 0; byte < msgs[i].len; byte++)
 					printk(" %02x", msgs[i].buf[byte]);
 			}
@@ -281,13 +290,13 @@ static int em28xx_i2c_xfer(struct i2c_adapter *i2c_adap,
 		}
 		if (rc < 0)
 			goto err;
-		if (i2c_debug>=2)
+		if (i2c_debug >= 2)
 			printk("\n");
 	}
 
 	return num;
-      err:
-	dprintk2(2," ERROR: %i\n", rc);
+err:
+	dprintk2(2, " ERROR: %i\n", rc);
 	return rc;
 }
 
@@ -330,7 +339,9 @@ static int em28xx_i2c_eeprom(struct em28xx *dev, unsigned char *eedata, int len)
 		return -1;
 
 	buf = 0;
-	if (1 != (err = i2c_master_send(&dev->i2c_client, &buf, 1))) {
+
+	err = i2c_master_send(&dev->i2c_client, &buf, 1);
+	if (err != 1) {
 		printk(KERN_INFO "%s: Huh, no eeprom present (err=%d)?\n",
 		       dev->name, err);
 		return -1;
@@ -403,8 +414,10 @@ static int em28xx_i2c_eeprom(struct em28xx *dev, unsigned char *eedata, int len)
 		break;
 	}
 	printk(KERN_INFO "Table at 0x%02x, strings=0x%04x, 0x%04x, 0x%04x\n",
-				em_eeprom->string_idx_table,em_eeprom->string1,
-				em_eeprom->string2,em_eeprom->string3);
+				em_eeprom->string_idx_table,
+				em_eeprom->string1,
+				em_eeprom->string2,
+				em_eeprom->string3);
 
 	return 0;
 }
@@ -430,58 +443,61 @@ static int attach_inform(struct i2c_client *client)
 	struct em28xx *dev = client->adapter->algo_data;
 
 	switch (client->addr << 1) {
-		case 0x86:
-		case 0x84:
-		case 0x96:
-		case 0x94:
-		{
-			struct v4l2_priv_tun_config tda9887_cfg;
-
-			struct tuner_setup tun_setup;
-
-			tun_setup.mode_mask = T_ANALOG_TV | T_RADIO;
-			tun_setup.type = TUNER_TDA9887;
-			tun_setup.addr = client->addr;
-
-			em28xx_i2c_call_clients(dev, TUNER_SET_TYPE_ADDR, &tun_setup);
-
-			tda9887_cfg.tuner = TUNER_TDA9887;
-			tda9887_cfg.priv = &dev->tda9887_conf;
-			em28xx_i2c_call_clients(dev, TUNER_SET_CONFIG,
-						&tda9887_cfg);
-			break;
-		}
-		case 0x42:
-			dprintk1(1,"attach_inform: saa7114 detected.\n");
-			break;
-		case 0x4a:
-			dprintk1(1,"attach_inform: saa7113 detected.\n");
-			break;
-		case 0xa0:
-			dprintk1(1,"attach_inform: eeprom detected.\n");
-			break;
-		case 0x60:
-		case 0x8e:
-		{
-			struct IR_i2c *ir = i2c_get_clientdata(client);
-			dprintk1(1,"attach_inform: IR detected (%s).\n",ir->phys);
-			em28xx_set_ir(dev,ir);
-			break;
-		}
-		case 0x80:
-		case 0x88:
-			dprintk1(1,"attach_inform: msp34xx detected.\n");
-			break;
-		case 0xb8:
-		case 0xba:
-			dprintk1(1,"attach_inform: tvp5150 detected.\n");
-			break;
-
-		default:
-			if (!dev->tuner_addr)
-				dev->tuner_addr = client->addr;
-
-			dprintk1(1,"attach inform: detected I2C address %x\n", client->addr << 1);
+	case 0x86:
+	case 0x84:
+	case 0x96:
+	case 0x94:
+	{
+		struct v4l2_priv_tun_config tda9887_cfg;
+
+		struct tuner_setup tun_setup;
+
+		tun_setup.mode_mask = T_ANALOG_TV | T_RADIO;
+		tun_setup.type = TUNER_TDA9887;
+		tun_setup.addr = client->addr;
+
+		em28xx_i2c_call_clients(dev, TUNER_SET_TYPE_ADDR,
+			&tun_setup);
+
+		tda9887_cfg.tuner = TUNER_TDA9887;
+		tda9887_cfg.priv = &dev->tda9887_conf;
+		em28xx_i2c_call_clients(dev, TUNER_SET_CONFIG,
+					&tda9887_cfg);
+		break;
+	}
+	case 0x42:
+		dprintk1(1, "attach_inform: saa7114 detected.\n");
+		break;
+	case 0x4a:
+		dprintk1(1, "attach_inform: saa7113 detected.\n");
+		break;
+	case 0xa0:
+		dprintk1(1, "attach_inform: eeprom detected.\n");
+		break;
+	case 0x60:
+	case 0x8e:
+	{
+		struct IR_i2c *ir = i2c_get_clientdata(client);
+		dprintk1(1, "attach_inform: IR detected (%s).\n",
+			ir->phys);
+		em28xx_set_ir(dev, ir);
+		break;
+	}
+	case 0x80:
+	case 0x88:
+		dprintk1(1, "attach_inform: msp34xx detected.\n");
+		break;
+	case 0xb8:
+	case 0xba:
+		dprintk1(1, "attach_inform: tvp5150 detected.\n");
+		break;
+
+	default:
+		if (!dev->tuner_addr)
+			dev->tuner_addr = client->addr;
+
+		dprintk1(1, "attach inform: detected I2C address %x\n",
+				client->addr << 1);
 
 	}
 

drivers/media/video/em28xx/em28xx-input.c

@@ -32,10 +32,12 @@
 
 static unsigned int ir_debug;
 module_param(ir_debug, int, 0644);
-MODULE_PARM_DESC(ir_debug,"enable debug messages [IR]");
+MODULE_PARM_DESC(ir_debug, "enable debug messages [IR]");
 
-#define dprintk(fmt, arg...)	if (ir_debug) \
-	printk(KERN_DEBUG "%s/ir: " fmt, ir->c.name , ## arg)
+#define dprintk(fmt, arg...) \
+	if (ir_debug) { \
+		printk(KERN_DEBUG "%s/ir: " fmt, ir->c.name , ## arg); \
+	}
 
 /* ----------------------------------------------------------------------- */
 
@@ -44,7 +46,7 @@ int em28xx_get_key_terratec(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
 	unsigned char b;
 
 	/* poll IR chip */
-	if (1 != i2c_master_recv(&ir->c,&b,1)) {
+	if (1 != i2c_master_recv(&ir->c, &b, 1)) {
 		dprintk("read error\n");
 		return -EIO;
 	}
@@ -74,24 +76,25 @@ int em28xx_get_key_em_haup(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
 	unsigned char code;
 
 	/* poll IR chip */
-	if (2 != i2c_master_recv(&ir->c,buf,2))
+	if (2 != i2c_master_recv(&ir->c, buf, 2))
 		return -EIO;
 
 	/* Does eliminate repeated parity code */
-	if (buf[1]==0xff)
+	if (buf[1] == 0xff)
 		return 0;
 
-	ir->old=buf[1];
+	ir->old = buf[1];
 
 	/* Rearranges bits to the right order */
-	code=    ((buf[0]&0x01)<<5) | /* 0010 0000 */
+	code =   ((buf[0]&0x01)<<5) | /* 0010 0000 */
 		 ((buf[0]&0x02)<<3) | /* 0001 0000 */
 		 ((buf[0]&0x04)<<1) | /* 0000 1000 */
 		 ((buf[0]&0x08)>>1) | /* 0000 0100 */
 		 ((buf[0]&0x10)>>3) | /* 0000 0010 */
 		 ((buf[0]&0x20)>>5);  /* 0000 0001 */
 
-	dprintk("ir hauppauge (em2840): code=0x%02x (rcv=0x%02x)\n",code,buf[0]);
+	dprintk("ir hauppauge (em2840): code=0x%02x (rcv=0x%02x)\n",
+			code, buf[0]);
 
 	/* return key */
 	*ir_key = code;
@@ -106,15 +109,14 @@ int em28xx_get_key_pinnacle_usb_grey(struct IR_i2c *ir, u32 *ir_key,
 
 	/* poll IR chip */
 
-	if (3 != i2c_master_recv(&ir->c,buf,3)) {
+	if (3 != i2c_master_recv(&ir->c, buf, 3)) {
 		dprintk("read error\n");
 		return -EIO;
 	}
 
 	dprintk("key %02x\n", buf[2]&0x3f);
-	if (buf[0]!=0x00){
+	if (buf[0] != 0x00)
 		return 0;
-	}
 
 	*ir_key = buf[2]&0x3f;
 	*ir_raw = buf[2]&0x3f;

drivers/media/video/em28xx/em28xx-video.c

 /*
-   em28xx-video.c - driver for Empia EM2800/EM2820/2840 USB video capture devices
+   em28xx-video.c - driver for Empia EM2800/EM2820/2840 USB
+		    video capture devices
 
    Copyright (C) 2005 Ludovico Cavedon <cavedon@sssup.it>
 		      Markus Rechberger <mrechberger@gmail.com>
@@ -58,10 +59,13 @@ static unsigned int isoc_debug;
 module_param(isoc_debug, int, 0644);
 MODULE_PARM_DESC(isoc_debug, "enable debug messages [isoc transfers]");
 
-#define em28xx_isocdbg(fmt, arg...) do {\
-	if (isoc_debug) \
+#define em28xx_isocdbg(fmt, arg...) \
+do {\
+	if (isoc_debug) { \
 		printk(KERN_INFO "%s %s :"fmt, \
-			 dev->name, __func__ , ##arg); } while (0)
+			 dev->name, __func__ , ##arg); \
+	} \
+  } while (0)
 
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
@@ -84,8 +88,8 @@ MODULE_PARM_DESC(vbi_nr,   "vbi device numbers");
 MODULE_PARM_DESC(radio_nr, "radio device numbers");
 
 static unsigned int video_debug;
-module_param(video_debug,int,0644);
-MODULE_PARM_DESC(video_debug,"enable debug messages [video]");
+module_param(video_debug, int, 0644);
+MODULE_PARM_DESC(video_debug, "enable debug messages [video]");
 
 /* Bitmask marking allocated devices from 0 to EM28XX_MAXBOARDS */
 static unsigned long em28xx_devused;
@@ -102,7 +106,7 @@ static struct v4l2_queryctrl em28xx_qctrl[] = {
 		.step = 0x1,
 		.default_value = 0x1f,
 		.flags = 0,
-	},{
+	}, {
 		.id = V4L2_CID_AUDIO_MUTE,
 		.type = V4L2_CTRL_TYPE_BOOLEAN,
 		.name = "Mute",
@@ -390,7 +394,7 @@ buffer_setup(struct videobuf_queue *vq, unsigned int *count, unsigned int *size)
 	dev->mode = EM28XX_ANALOG_MODE;
 
 	/* Ask tuner to go to analog mode */
-	memset (&f, 0, sizeof(f));
+	memset(&f, 0, sizeof(f));
 	f.frequency = dev->ctl_freq;
 
 	em28xx_i2c_call_clients(dev, VIDIOC_S_FREQUENCY, &f);
@@ -483,7 +487,8 @@ buffer_queue(struct videobuf_queue *vq, struct videobuf_buffer *vb)
 
 }
 
-static void buffer_release(struct videobuf_queue *vq, struct videobuf_buffer *vb)
+static void buffer_release(struct videobuf_queue *vq,
+				struct videobuf_buffer *vb)
 {
 	struct em28xx_buffer   *buf  = container_of(vb, struct em28xx_buffer, vb);
 	struct em28xx_fh       *fh   = vq->priv_data;
@@ -501,7 +506,7 @@ static struct videobuf_queue_ops em28xx_video_qops = {
 	.buf_release    = buffer_release,
 };
 
-/*********************  v4l2 interface  ******************************************/
+/*********************  v4l2 interface  **************************************/
 
 /*
  * em28xx_config()
@@ -516,9 +521,9 @@ static int em28xx_config(struct em28xx *dev)
 
 	/* enable vbi capturing */
 
-/*	em28xx_write_regs_req(dev,0x00,0x0e,"\xC0",1); audio register */
-/*	em28xx_write_regs_req(dev,0x00,0x0f,"\x80",1); clk register */
-	em28xx_write_regs_req(dev,0x00,0x11,"\x51",1);
+/*	em28xx_write_regs_req(dev, 0x00, 0x0e, "\xC0", 1); audio register */
+/*	em28xx_write_regs_req(dev, 0x00, 0x0f, "\x80", 1); clk register */
+	em28xx_write_regs_req(dev, 0x00, 0x11, "\x51", 1);
 
 	dev->mute = 1;		/* maybe not the right place... */
 	dev->volume = 0x1f;
@@ -557,12 +562,15 @@ static void video_mux(struct em28xx *dev, int index)
 	em28xx_i2c_call_clients(dev, VIDIOC_INT_S_VIDEO_ROUTING, &route);
 
 	if (dev->has_msp34xx) {
-		if (dev->i2s_speed)
-			em28xx_i2c_call_clients(dev, VIDIOC_INT_I2S_CLOCK_FREQ, &dev->i2s_speed);
+		if (dev->i2s_speed) {
+			em28xx_i2c_call_clients(dev, VIDIOC_INT_I2S_CLOCK_FREQ,
+				&dev->i2s_speed);
+		}
 		route.input = dev->ctl_ainput;
 		route.output = MSP_OUTPUT(MSP_SC_IN_DSP_SCART1);
 		/* Note: this is msp3400 specific */
-		em28xx_i2c_call_clients(dev, VIDIOC_INT_S_AUDIO_ROUTING, &route);
+		em28xx_i2c_call_clients(dev, VIDIOC_INT_S_AUDIO_ROUTING,
+			&route);
 	}
 
 	em28xx_audio_analog_set(dev);
@@ -802,7 +810,7 @@ static int vidioc_s_fmt_cap(struct file *file, void *priv,
 	return rc;
 }
 
-static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id *norm)
+static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id * norm)
 {
 	struct em28xx_fh   *fh  = priv;
 	struct em28xx      *dev = fh->dev;
@@ -919,11 +927,11 @@ static int vidioc_g_audio(struct file *file, void *priv, struct v4l2_audio *a)
 
 	index = dev->ctl_ainput;
 
-	if (index == 0) {
+	if (index == 0)
 		strcpy(a->name, "Television");
-	} else {
+	else
 		strcpy(a->name, "Line In");
-	}
+
 	a->capability = V4L2_AUDCAP_STEREO;
 	a->index = index;
 
@@ -1501,7 +1509,7 @@ static int em28xx_v4l2_open(struct inode *inode, struct file *filp)
 {
 	int minor = iminor(inode);
 	int errCode = 0, radio = 0;
-	struct em28xx *h,*dev = NULL;
+	struct em28xx *h, *dev = NULL;
 	struct em28xx_fh *fh;
 	enum v4l2_buf_type fh_type = 0;
 
@@ -1602,12 +1610,13 @@ static void em28xx_release_resources(struct em28xx *dev)
 	usb_put_dev(dev->udev);
 
 	/* Mark device as unused */
-	em28xx_devused&=~(1<<dev->devno);
+	em28xx_devused &= ~(1<<dev->devno);
 }
 
 /*
  * em28xx_v4l2_close()
- * stops streaming and deallocates all resources allocated by the v4l2 calls and ioctls
+ * stops streaming and deallocates all resources allocated by the v4l2
+ * calls and ioctls
  */
 static int em28xx_v4l2_close(struct inode *inode, struct file *filp)
 {
@@ -1660,7 +1669,7 @@ static int em28xx_v4l2_close(struct inode *inode, struct file *filp)
  * will allocate buffers when called for the first time
  */
 static ssize_t
-em28xx_v4l2_read(struct file *filp, char __user * buf, size_t count,
+em28xx_v4l2_read(struct file *filp, char __user *buf, size_t count,
 		 loff_t *pos)
 {
 	struct em28xx_fh *fh = filp->private_data;
@@ -1825,7 +1834,7 @@ static struct video_device em28xx_radio_template = {
 #endif
 };
 
-/******************************** usb interface *****************************************/
+/******************************** usb interface ******************************/
 
 
 static LIST_HEAD(em28xx_extension_devlist);
@@ -2088,22 +2097,24 @@ static int em28xx_usb_probe(struct usb_interface *interface,
 	ifnum = interface->altsetting[0].desc.bInterfaceNumber;
 
 	/* Check to see next free device and mark as used */
-	nr=find_first_zero_bit(&em28xx_devused,EM28XX_MAXBOARDS);
-	em28xx_devused|=1<<nr;
+	nr = find_first_zero_bit(&em28xx_devused, EM28XX_MAXBOARDS);
+	em28xx_devused |= 1<<nr;
 
 	/* Don't register audio interfaces */
 	if (interface->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) {
 		em28xx_err(DRIVER_NAME " audio device (%04x:%04x): interface %i, class %i\n",
-				udev->descriptor.idVendor,udev->descriptor.idProduct,
+				udev->descriptor.idVendor,
+				udev->descriptor.idProduct,
 				ifnum,
 				interface->altsetting[0].desc.bInterfaceClass);
 
-		em28xx_devused&=~(1<<nr);
+		em28xx_devused &= ~(1<<nr);
 		return -ENODEV;
 	}
 
 	em28xx_err(DRIVER_NAME " new video device (%04x:%04x): interface %i, class %i\n",
-			udev->descriptor.idVendor,udev->descriptor.idProduct,
+			udev->descriptor.idVendor,
+			udev->descriptor.idProduct,
 			ifnum,
 			interface->altsetting[0].desc.bInterfaceClass);
 
@@ -2113,18 +2124,19 @@ static int em28xx_usb_probe(struct usb_interface *interface,
 	if ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) !=
 	    USB_ENDPOINT_XFER_ISOC) {
 		em28xx_err(DRIVER_NAME " probing error: endpoint is non-ISO endpoint!\n");
-		em28xx_devused&=~(1<<nr);
+		em28xx_devused &= ~(1<<nr);
 		return -ENODEV;
 	}
 	if ((endpoint->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT) {
 		em28xx_err(DRIVER_NAME " probing error: endpoint is ISO OUT endpoint!\n");
-		em28xx_devused&=~(1<<nr);
+		em28xx_devused &= ~(1<<nr);
 		return -ENODEV;
 	}
 
 	if (nr >= EM28XX_MAXBOARDS) {
-		printk (DRIVER_NAME ": Supports only %i em28xx boards.\n",EM28XX_MAXBOARDS);
-		em28xx_devused&=~(1<<nr);
+		printk(DRIVER_NAME ": Supports only %i em28xx boards.\n",
+				EM28XX_MAXBOARDS);
+		em28xx_devused &= ~(1<<nr);
 		return -ENOMEM;
 	}
 
@@ -2132,7 +2144,7 @@ static int em28xx_usb_probe(struct usb_interface *interface,
 	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
 	if (dev == NULL) {
 		em28xx_err(DRIVER_NAME ": out of memory!\n");
-		em28xx_devused&=~(1<<nr);
+		em28xx_devused &= ~(1<<nr);
 		return -ENOMEM;
 	}
 
@@ -2156,14 +2168,14 @@ static int em28xx_usb_probe(struct usb_interface *interface,
 	/* compute alternate max packet sizes */
 	uif = udev->actconfig->interface[0];
 
-	dev->num_alt=uif->num_altsetting;
-	em28xx_info("Alternate settings: %i\n",dev->num_alt);
-//	dev->alt_max_pkt_size = kmalloc(sizeof(*dev->alt_max_pkt_size)*
-	dev->alt_max_pkt_size = kmalloc(32*
-						dev->num_alt,GFP_KERNEL);
+	dev->num_alt = uif->num_altsetting;
+	em28xx_info("Alternate settings: %i\n", dev->num_alt);
+/*	dev->alt_max_pkt_size = kmalloc(sizeof(*dev->alt_max_pkt_size)* */
+	dev->alt_max_pkt_size = kmalloc(32 * dev->num_alt, GFP_KERNEL);
+
 	if (dev->alt_max_pkt_size == NULL) {
 		em28xx_errdev("out of memory!\n");
-		em28xx_devused&=~(1<<nr);
+		em28xx_devused &= ~(1<<nr);
 		kfree(dev);
 		return -ENOMEM;
 	}
@@ -2173,11 +2185,11 @@ static int em28xx_usb_probe(struct usb_interface *interface,
 							wMaxPacketSize);
 		dev->alt_max_pkt_size[i] =
 		    (tmp & 0x07ff) * (((tmp & 0x1800) >> 11) + 1);
-		em28xx_info("Alternate setting %i, max size= %i\n",i,
-							dev->alt_max_pkt_size[i]);
+		em28xx_info("Alternate setting %i, max size= %i\n", i,
+						dev->alt_max_pkt_size[i]);
 	}
 
-	if ((card[nr]>=0)&&(card[nr]<em28xx_bcount))
+	if ((card[nr] >= 0) && (card[nr] < em28xx_bcount))
 		dev->model = card[nr];
 
 	/* allocate device struct */
@@ -2213,7 +2225,8 @@ static void em28xx_usb_disconnect(struct usb_interface *interface)
 
 	em28xx_info("disconnecting %s\n", dev->vdev->name);
 
-	/* wait until all current v4l2 io is finished then deallocate resources */
+	/* wait until all current v4l2 io is finished then deallocate
+	   resources */
 	mutex_lock(&dev->lock);
 
 	wake_up_interruptible_all(&dev->open);

drivers/media/video/em28xx/em28xx.h

@@ -365,7 +365,8 @@ struct em28xx {
 	unsigned int video_bytesread;	/* Number of bytes read */
 
 	unsigned long hash;	/* eeprom hash - for boards with generic ID */
-	unsigned long i2c_hash;	/* i2c devicelist hash - for boards with generic ID */
+	unsigned long i2c_hash;	/* i2c devicelist hash -
+				   for boards with generic ID */
 
 	struct em28xx_audio *adev;
 
@@ -399,14 +400,14 @@ struct em28xx {
 	struct urb *urb[EM28XX_NUM_BUFS];	/* urb for isoc transfers */
 	char *transfer_buffer[EM28XX_NUM_BUFS];	/* transfer buffers for isoc transfer */
 	/* helper funcs that call usb_control_msg */
-	int (*em28xx_write_regs) (struct em28xx * dev, u16 reg, char *buf,
-				  int len);
-	int (*em28xx_read_reg) (struct em28xx * dev, u16 reg);
-	int (*em28xx_read_reg_req_len) (struct em28xx * dev, u8 req, u16 reg,
+	int (*em28xx_write_regs) (struct em28xx *dev, u16 reg,
 					char *buf, int len);
-	int (*em28xx_write_regs_req) (struct em28xx * dev, u8 req, u16 reg,
+	int (*em28xx_read_reg) (struct em28xx *dev, u16 reg);
+	int (*em28xx_read_reg_req_len) (struct em28xx *dev, u8 req, u16 reg,
+					char *buf, int len);
+	int (*em28xx_write_regs_req) (struct em28xx *dev, u8 req, u16 reg,
 				      char *buf, int len);
-	int (*em28xx_read_reg_req) (struct em28xx * dev, u8 req, u16 reg);
+	int (*em28xx_read_reg_req) (struct em28xx *dev, u8 req, u16 reg);
 
 	enum em28xx_mode mode;
 
@@ -459,7 +460,7 @@ int em28xx_register_extension(struct em28xx_ops *dev);
 void em28xx_unregister_extension(struct em28xx_ops *dev);
 
 /* Provided by em28xx-cards.c */
-extern int em2800_variant_detect(struct usb_device* udev,int model);
+extern int em2800_variant_detect(struct usb_device *udev, int model);
 extern void em28xx_pre_card_setup(struct em28xx *dev);
 extern void em28xx_card_setup(struct em28xx *dev);
 extern struct em28xx_board em28xx_boards[];
@@ -557,80 +558,80 @@ int em28xx_get_key_pinnacle_usb_grey(struct IR_i2c *ir, u32 *ir_key,
 	printk(KERN_WARNING "%s: "fmt,\
 			dev->name , ##arg); } while (0)
 
-inline static int em28xx_compression_disable(struct em28xx *dev)
+static inline int em28xx_compression_disable(struct em28xx *dev)
 {
 	/* side effect of disabling scaler and mixer */
 	return em28xx_write_regs(dev, COMPR_REG, "\x00", 1);
 }
 
-inline static int em28xx_contrast_get(struct em28xx *dev)
+static inline int em28xx_contrast_get(struct em28xx *dev)
 {
 	return em28xx_read_reg(dev, YGAIN_REG) & 0x1f;
 }
 
-inline static int em28xx_brightness_get(struct em28xx *dev)
+static inline int em28xx_brightness_get(struct em28xx *dev)
 {
 	return em28xx_read_reg(dev, YOFFSET_REG);
 }
 
-inline static int em28xx_saturation_get(struct em28xx *dev)
+static inline int em28xx_saturation_get(struct em28xx *dev)
 {
 	return em28xx_read_reg(dev, UVGAIN_REG) & 0x1f;
 }
 
-inline static int em28xx_u_balance_get(struct em28xx *dev)
+static inline int em28xx_u_balance_get(struct em28xx *dev)
 {
 	return em28xx_read_reg(dev, UOFFSET_REG);
 }
 
-inline static int em28xx_v_balance_get(struct em28xx *dev)
+static inline int em28xx_v_balance_get(struct em28xx *dev)
 {
 	return em28xx_read_reg(dev, VOFFSET_REG);
 }
 
-inline static int em28xx_gamma_get(struct em28xx *dev)
+static inline int em28xx_gamma_get(struct em28xx *dev)
 {
 	return em28xx_read_reg(dev, GAMMA_REG) & 0x3f;
 }
 
-inline static int em28xx_contrast_set(struct em28xx *dev, s32 val)
+static inline int em28xx_contrast_set(struct em28xx *dev, s32 val)
 {
 	u8 tmp = (u8) val;
 	return em28xx_write_regs(dev, YGAIN_REG, &tmp, 1);
 }
 
-inline static int em28xx_brightness_set(struct em28xx *dev, s32 val)
+static inline int em28xx_brightness_set(struct em28xx *dev, s32 val)
 {
 	u8 tmp = (u8) val;
 	return em28xx_write_regs(dev, YOFFSET_REG, &tmp, 1);
 }
 
-inline static int em28xx_saturation_set(struct em28xx *dev, s32 val)
+static inline int em28xx_saturation_set(struct em28xx *dev, s32 val)
 {
 	u8 tmp = (u8) val;
 	return em28xx_write_regs(dev, UVGAIN_REG, &tmp, 1);
 }
 
-inline static int em28xx_u_balance_set(struct em28xx *dev, s32 val)
+static inline int em28xx_u_balance_set(struct em28xx *dev, s32 val)
 {
 	u8 tmp = (u8) val;
 	return em28xx_write_regs(dev, UOFFSET_REG, &tmp, 1);
 }
 
-inline static int em28xx_v_balance_set(struct em28xx *dev, s32 val)
+static inline int em28xx_v_balance_set(struct em28xx *dev, s32 val)
 {
 	u8 tmp = (u8) val;
 	return em28xx_write_regs(dev, VOFFSET_REG, &tmp, 1);
 }
 
-inline static int em28xx_gamma_set(struct em28xx *dev, s32 val)
+static inline int em28xx_gamma_set(struct em28xx *dev, s32 val)
 {
 	u8 tmp = (u8) val;
 	return em28xx_write_regs(dev, GAMMA_REG, &tmp, 1);
 }
 
 /*FIXME: maxw should be dependent of alt mode */
-inline static unsigned int norm_maxw(struct em28xx *dev)
+static inline unsigned int norm_maxw(struct em28xx *dev)
 {
 	if (dev->max_range_640_480)
 		return 640;
@@ -638,7 +639,7 @@ inline static unsigned int norm_maxw(struct em28xx *dev)
 		return 720;
 }
 
-inline static unsigned int norm_maxh(struct em28xx *dev)
+static inline unsigned int norm_maxh(struct em28xx *dev)
 {
 	if (dev->max_range_640_480)
 		return 480;