Commit 6f1cf525 authored by Robin Gong's avatar Robin Gong Committed by Mark Brown

regualtor: pfuze100: correct sw1a/sw2 on pfuze3000

PFUZE100_SWB_REG is not proper for sw1a/sw2, because enable_mask/enable_reg
is not correct. On PFUZE3000, sw1a/sw2 should be the same as sw1a/sw2 on
pfuze100 except that voltages are not linear, so add new PFUZE3000_SW_REG
and pfuze3000_sw_regulator_ops which like the non-linear PFUZE100_SW_REG
and pfuze100_sw_regulator_ops.

Fixes: 1dced996 ("regulator: pfuze100: update voltage setting for pfuze3000 sw1a")
Reported-by: default avatarChristophe Meynard <Christophe.Meynard@ign.fr>
Signed-off-by: default avatarRobin Gong <yibin.gong@nxp.com>
Link: https://lore.kernel.org/r/1592171648-8752-1-git-send-email-yibin.gong@nxp.comSigned-off-by: default avatarMark Brown <broonie@kernel.org>
parent 92919679
......@@ -209,6 +209,19 @@ static const struct regulator_ops pfuze100_swb_regulator_ops = {
};
static const struct regulator_ops pfuze3000_sw_regulator_ops = {
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
.list_voltage = regulator_list_voltage_table,
.map_voltage = regulator_map_voltage_ascend,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_time_sel = regulator_set_voltage_time_sel,
.set_ramp_delay = pfuze100_set_ramp_delay,
};
#define PFUZE100_FIXED_REG(_chip, _name, base, voltage) \
[_chip ## _ ## _name] = { \
.desc = { \
......@@ -318,23 +331,28 @@ static const struct regulator_ops pfuze100_swb_regulator_ops = {
.stby_mask = 0x20, \
}
#define PFUZE3000_SW2_REG(_chip, _name, base, min, max, step) { \
.desc = { \
.name = #_name,\
.n_voltages = ((max) - (min)) / (step) + 1, \
.ops = &pfuze100_sw_regulator_ops, \
.type = REGULATOR_VOLTAGE, \
.id = _chip ## _ ## _name, \
.owner = THIS_MODULE, \
.min_uV = (min), \
.uV_step = (step), \
.vsel_reg = (base) + PFUZE100_VOL_OFFSET, \
.vsel_mask = 0x7, \
}, \
.stby_reg = (base) + PFUZE100_STANDBY_OFFSET, \
.stby_mask = 0x7, \
}
/* No linar case for the some switches of PFUZE3000 */
#define PFUZE3000_SW_REG(_chip, _name, base, mask, voltages) \
[_chip ## _ ## _name] = { \
.desc = { \
.name = #_name, \
.n_voltages = ARRAY_SIZE(voltages), \
.ops = &pfuze3000_sw_regulator_ops, \
.type = REGULATOR_VOLTAGE, \
.id = _chip ## _ ## _name, \
.owner = THIS_MODULE, \
.volt_table = voltages, \
.vsel_reg = (base) + PFUZE100_VOL_OFFSET, \
.vsel_mask = (mask), \
.enable_reg = (base) + PFUZE100_MODE_OFFSET, \
.enable_mask = 0xf, \
.enable_val = 0x8, \
.enable_time = 500, \
}, \
.stby_reg = (base) + PFUZE100_STANDBY_OFFSET, \
.stby_mask = (mask), \
.sw_reg = true, \
}
#define PFUZE3000_SW3_REG(_chip, _name, base, min, max, step) { \
.desc = { \
......@@ -391,9 +409,9 @@ static struct pfuze_regulator pfuze200_regulators[] = {
};
static struct pfuze_regulator pfuze3000_regulators[] = {
PFUZE100_SWB_REG(PFUZE3000, SW1A, PFUZE100_SW1ABVOL, 0x1f, pfuze3000_sw1a),
PFUZE3000_SW_REG(PFUZE3000, SW1A, PFUZE100_SW1ABVOL, 0x1f, pfuze3000_sw1a),
PFUZE100_SW_REG(PFUZE3000, SW1B, PFUZE100_SW1CVOL, 700000, 1475000, 25000),
PFUZE100_SWB_REG(PFUZE3000, SW2, PFUZE100_SW2VOL, 0x7, pfuze3000_sw2lo),
PFUZE3000_SW_REG(PFUZE3000, SW2, PFUZE100_SW2VOL, 0x7, pfuze3000_sw2lo),
PFUZE3000_SW3_REG(PFUZE3000, SW3, PFUZE100_SW3AVOL, 900000, 1650000, 50000),
PFUZE100_SWB_REG(PFUZE3000, SWBST, PFUZE100_SWBSTCON1, 0x3, pfuze100_swbst),
PFUZE100_SWB_REG(PFUZE3000, VSNVS, PFUZE100_VSNVSVOL, 0x7, pfuze100_vsnvs),
......@@ -407,8 +425,8 @@ static struct pfuze_regulator pfuze3000_regulators[] = {
};
static struct pfuze_regulator pfuze3001_regulators[] = {
PFUZE100_SWB_REG(PFUZE3001, SW1, PFUZE100_SW1ABVOL, 0x1f, pfuze3000_sw1a),
PFUZE100_SWB_REG(PFUZE3001, SW2, PFUZE100_SW2VOL, 0x7, pfuze3000_sw2lo),
PFUZE3000_SW_REG(PFUZE3001, SW1, PFUZE100_SW1ABVOL, 0x1f, pfuze3000_sw1a),
PFUZE3000_SW_REG(PFUZE3001, SW2, PFUZE100_SW2VOL, 0x7, pfuze3000_sw2lo),
PFUZE3000_SW3_REG(PFUZE3001, SW3, PFUZE100_SW3AVOL, 900000, 1650000, 50000),
PFUZE100_SWB_REG(PFUZE3001, VSNVS, PFUZE100_VSNVSVOL, 0x7, pfuze100_vsnvs),
PFUZE100_VGEN_REG(PFUZE3001, VLDO1, PFUZE100_VGEN1VOL, 1800000, 3300000, 100000),
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment