Commit 6f86ed82 authored by Dragan Cvetic's avatar Dragan Cvetic Committed by Greg Kroah-Hartman

misc: xilinx_sdfec: Add ability to configure turbo

Add the capability to configure and retrieve turbo mode
via the ioctls XSDFEC_SET_TURBO and XSDFEC_GET_TURBO.
Add char device interface per DT node present and support
file operations:
- open(),
- close(),
- unlocked_ioctl(),
- compat_ioctl().
Tested-by: default avatarDragan Cvetic <dragan.cvetic@xilinx.com>
Signed-off-by: default avatarDerek Kiernan <derek.kiernan@xilinx.com>
Signed-off-by: default avatarDragan Cvetic <dragan.cvetic@xilinx.com>
Link: https://lore.kernel.org/r/1564216438-322406-3-git-send-email-dragan.cvetic@xilinx.comSigned-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 6d54e455
......@@ -19,6 +19,7 @@
#include <linux/poll.h>
#include <linux/slab.h>
#include <linux/clk.h>
#include <linux/compat.h>
#include <uapi/misc/xilinx_sdfec.h>
......@@ -106,6 +107,12 @@ static struct mutex dev_idr_lock;
/* BYPASS Register */
#define XSDFEC_BYPASS_ADDR (0x3C)
/* Turbo Code Register */
#define XSDFEC_TURBO_ADDR (0x100)
#define XSDFEC_TURBO_SCALE_MASK (0xFFF)
#define XSDFEC_TURBO_SCALE_BIT_POS (8)
#define XSDFEC_TURBO_SCALE_MAX (15)
/**
* struct xsdfec_clks - For managing SD-FEC clocks
* @core_clk: Main processing clock for core
......@@ -214,6 +221,55 @@ static void update_config_from_hw(struct xsdfec_dev *xsdfec)
xsdfec->state = XSDFEC_STOPPED;
}
static int xsdfec_set_turbo(struct xsdfec_dev *xsdfec, void __user *arg)
{
struct xsdfec_turbo turbo;
int err;
u32 turbo_write;
err = copy_from_user(&turbo, arg, sizeof(turbo));
if (err)
return -EFAULT;
if (turbo.alg >= XSDFEC_TURBO_ALG_MAX)
return -EINVAL;
if (turbo.scale > XSDFEC_TURBO_SCALE_MAX)
return -EINVAL;
/* Check to see what device tree says about the FEC codes */
if (xsdfec->config.code == XSDFEC_LDPC_CODE)
return -EIO;
turbo_write = ((turbo.scale & XSDFEC_TURBO_SCALE_MASK)
<< XSDFEC_TURBO_SCALE_BIT_POS) |
turbo.alg;
xsdfec_regwrite(xsdfec, XSDFEC_TURBO_ADDR, turbo_write);
return err;
}
static int xsdfec_get_turbo(struct xsdfec_dev *xsdfec, void __user *arg)
{
u32 reg_value;
struct xsdfec_turbo turbo_params;
int err;
if (xsdfec->config.code == XSDFEC_LDPC_CODE)
return -EIO;
reg_value = xsdfec_regread(xsdfec, XSDFEC_TURBO_ADDR);
turbo_params.scale = (reg_value & XSDFEC_TURBO_SCALE_MASK) >>
XSDFEC_TURBO_SCALE_BIT_POS;
turbo_params.alg = reg_value & 0x1;
err = copy_to_user(arg, &turbo_params, sizeof(turbo_params));
if (err)
err = -EFAULT;
return err;
}
static u32
xsdfec_translate_axis_width_cfg_val(enum xsdfec_axis_width axis_width_cfg)
{
......@@ -277,8 +333,62 @@ static int xsdfec_cfg_axi_streams(struct xsdfec_dev *xsdfec)
return 0;
}
static int xsdfec_dev_open(struct inode *iptr, struct file *fptr)
{
return 0;
}
static int xsdfec_dev_release(struct inode *iptr, struct file *fptr)
{
return 0;
}
static long xsdfec_dev_ioctl(struct file *fptr, unsigned int cmd,
unsigned long data)
{
struct xsdfec_dev *xsdfec;
void __user *arg = NULL;
int rval = -EINVAL;
xsdfec = container_of(fptr->private_data, struct xsdfec_dev, miscdev);
/* check if ioctl argument is present and valid */
if (_IOC_DIR(cmd) != _IOC_NONE) {
arg = (void __user *)data;
if (!arg)
return rval;
}
switch (cmd) {
case XSDFEC_SET_TURBO:
rval = xsdfec_set_turbo(xsdfec, arg);
break;
case XSDFEC_GET_TURBO:
rval = xsdfec_get_turbo(xsdfec, arg);
break;
default:
/* Should not get here */
break;
}
return rval;
}
#ifdef CONFIG_COMPAT
static long xsdfec_dev_compat_ioctl(struct file *file, unsigned int cmd,
unsigned long data)
{
return xsdfec_dev_ioctl(file, cmd, (unsigned long)compat_ptr(data));
}
#endif
static const struct file_operations xsdfec_fops = {
.owner = THIS_MODULE,
.open = xsdfec_dev_open,
.release = xsdfec_dev_release,
.unlocked_ioctl = xsdfec_dev_ioctl,
#ifdef CONFIG_COMPAT
.compat_ioctl = xsdfec_dev_compat_ioctl,
#endif
};
static int xsdfec_parse_of(struct xsdfec_dev *xsdfec)
......
......@@ -40,6 +40,22 @@ enum xsdfec_order {
XSDFEC_OUT_OF_ORDER,
};
/**
* enum xsdfec_turbo_alg - Turbo Algorithm Type.
* @XSDFEC_MAX_SCALE: Max Log-Map algorithm with extrinsic scaling. When
* scaling is set to this is equivalent to the Max Log-Map
* algorithm.
* @XSDFEC_MAX_STAR: Log-Map algorithm.
* @XSDFEC_TURBO_ALG_MAX: Used to indicate out of bound Turbo algorithms.
*
* This enum specifies which Turbo Decode algorithm is in use.
*/
enum xsdfec_turbo_alg {
XSDFEC_MAX_SCALE = 0,
XSDFEC_MAX_STAR,
XSDFEC_TURBO_ALG_MAX,
};
/**
* enum xsdfec_state - State.
* @XSDFEC_INIT: Driver is initialized.
......@@ -97,6 +113,29 @@ enum xsdfec_axis_word_include {
XSDFEC_AXIS_WORDS_INCLUDE_MAX,
};
/**
* struct xsdfec_turbo - User data for Turbo codes.
* @alg: Specifies which Turbo decode algorithm to use
* @scale: Specifies the extrinsic scaling to apply when the Max Scale algorithm
* has been selected
*
* Turbo code structure to communicate parameters to XSDFEC driver.
*/
struct xsdfec_turbo {
__u32 alg;
__u8 scale;
};
/**
* struct xsdfec_status - Status of SD-FEC core.
* @state: State of the SD-FEC core
* @activity: Describes if the SD-FEC instance is Active
*/
struct xsdfec_status {
__u32 state;
__s8 activity;
};
/**
* struct xsdfec_irq - Enabling or Disabling Interrupts.
* @enable_isr: If true enables the ISR
......@@ -135,4 +174,32 @@ struct xsdfec_config {
* XSDFEC IOCTL List
*/
#define XSDFEC_MAGIC 'f'
/**
* DOC: XSDFEC_SET_TURBO
* @Parameters
*
* @struct xsdfec_turbo *
* Pointer to the &struct xsdfec_turbo that contains the Turbo decode
* settings for the SD-FEC core
*
* @Description
*
* ioctl that sets the SD-FEC Turbo parameter values
*
* This can only be used when the driver is in the XSDFEC_STOPPED state
*/
#define XSDFEC_SET_TURBO _IOW(XSDFEC_MAGIC, 4, struct xsdfec_turbo)
/**
* DOC: XSDFEC_GET_TURBO
* @Parameters
*
* @struct xsdfec_turbo *
* Pointer to the &struct xsdfec_turbo that contains the current Turbo
* decode settings of the SD-FEC Block
*
* @Description
*
* ioctl that returns SD-FEC turbo param values
*/
#define XSDFEC_GET_TURBO _IOR(XSDFEC_MAGIC, 7, struct xsdfec_turbo)
#endif /* __XILINX_SDFEC_H__ */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment