libata: add CONFIG_PM to libata core layer

Conditionalize all PM related stuff in libata core layer using
CONFIG_PM.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

drivers/ata/libata-core.c

@@ -5354,6 +5354,7 @@ int ata_flush_cache(struct ata_device *dev)
 	return 0;
 }
 
+#ifdef CONFIG_PM
 static int ata_host_request_pm(struct ata_host *host, pm_message_t mesg,
 			       unsigned int action, unsigned int ehi_flags,
 			       int wait)
@@ -5469,6 +5470,7 @@ void ata_host_resume(struct ata_host *host)
 			    ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET, 0);
 	host->dev->power.power_state = PMSG_ON;
 }
+#endif
 
 /**
  *	ata_port_start - Set port up for dma.
@@ -6104,6 +6106,7 @@ int pci_test_config_bits(struct pci_dev *pdev, const struct pci_bits *bits)
 	return (tmp == bits->val) ? 1 : 0;
 }
 
+#ifdef CONFIG_PM
 void ata_pci_device_do_suspend(struct pci_dev *pdev, pm_message_t mesg)
 {
 	pci_save_state(pdev);
@@ -6155,6 +6158,8 @@ int ata_pci_device_resume(struct pci_dev *pdev)
 		ata_host_resume(host);
 	return rc;
 }
+#endif /* CONFIG_PM */
+
 #endif /* CONFIG_PCI */
 
 
@@ -6363,8 +6368,10 @@ EXPORT_SYMBOL_GPL(sata_scr_write);
 EXPORT_SYMBOL_GPL(sata_scr_write_flush);
 EXPORT_SYMBOL_GPL(ata_port_online);
 EXPORT_SYMBOL_GPL(ata_port_offline);
+#ifdef CONFIG_PM
 EXPORT_SYMBOL_GPL(ata_host_suspend);
 EXPORT_SYMBOL_GPL(ata_host_resume);
+#endif /* CONFIG_PM */
 EXPORT_SYMBOL_GPL(ata_id_string);
 EXPORT_SYMBOL_GPL(ata_id_c_string);
 EXPORT_SYMBOL_GPL(ata_id_to_dma_mode);
@@ -6380,16 +6387,20 @@ EXPORT_SYMBOL_GPL(pci_test_config_bits);
 EXPORT_SYMBOL_GPL(ata_pci_init_native_mode);
 EXPORT_SYMBOL_GPL(ata_pci_init_one);
 EXPORT_SYMBOL_GPL(ata_pci_remove_one);
+#ifdef CONFIG_PM
 EXPORT_SYMBOL_GPL(ata_pci_device_do_suspend);
 EXPORT_SYMBOL_GPL(ata_pci_device_do_resume);
 EXPORT_SYMBOL_GPL(ata_pci_device_suspend);
 EXPORT_SYMBOL_GPL(ata_pci_device_resume);
+#endif /* CONFIG_PM */
 EXPORT_SYMBOL_GPL(ata_pci_default_filter);
 EXPORT_SYMBOL_GPL(ata_pci_clear_simplex);
 #endif /* CONFIG_PCI */
 
+#ifdef CONFIG_PM
 EXPORT_SYMBOL_GPL(ata_scsi_device_suspend);
 EXPORT_SYMBOL_GPL(ata_scsi_device_resume);
+#endif /* CONFIG_PM */
 
 EXPORT_SYMBOL_GPL(ata_eng_timeout);
 EXPORT_SYMBOL_GPL(ata_port_schedule_eh);

drivers/ata/libata-eh.c

@@ -52,8 +52,33 @@ enum {
 
 static void __ata_port_freeze(struct ata_port *ap);
 static void ata_eh_finish(struct ata_port *ap);
+#ifdef CONFIG_PM
 static void ata_eh_handle_port_suspend(struct ata_port *ap);
 static void ata_eh_handle_port_resume(struct ata_port *ap);
+static int ata_eh_suspend(struct ata_port *ap,
+			  struct ata_device **r_failed_dev);
+static void ata_eh_prep_resume(struct ata_port *ap);
+static int ata_eh_resume(struct ata_port *ap, struct ata_device **r_failed_dev);
+#else /* CONFIG_PM */
+static void ata_eh_handle_port_suspend(struct ata_port *ap)
+{ }
+
+static void ata_eh_handle_port_resume(struct ata_port *ap)
+{ }
+
+static int ata_eh_suspend(struct ata_port *ap, struct ata_device **r_failed_dev)
+{
+	return 0;
+}
+
+static void ata_eh_prep_resume(struct ata_port *ap)
+{ }
+
+static int ata_eh_resume(struct ata_port *ap, struct ata_device **r_failed_dev)
+{
+	return 0;
+}
+#endif /* CONFIG_PM */
 
 static void ata_ering_record(struct ata_ering *ering, int is_io,
 			     unsigned int err_mask)
@@ -1790,6 +1815,7 @@ static int ata_eh_revalidate_and_attach(struct ata_port *ap,
 	return rc;
 }
 
+#ifdef CONFIG_PM
 /**
  *	ata_eh_suspend - handle suspend EH action
  *	@ap: target host port
@@ -1947,6 +1973,7 @@ static int ata_eh_resume(struct ata_port *ap, struct ata_device **r_failed_dev)
 	DPRINTK("EXIT\n");
 	return 0;
 }
+#endif /* CONFIG_PM */
 
 static int ata_port_nr_enabled(struct ata_port *ap)
 {
@@ -2249,6 +2276,7 @@ void ata_do_eh(struct ata_port *ap, ata_prereset_fn_t prereset,
 	ata_eh_finish(ap);
 }
 
+#ifdef CONFIG_PM
 /**
  *	ata_eh_handle_port_suspend - perform port suspend operation
  *	@ap: port to suspend
@@ -2364,3 +2392,4 @@ static void ata_eh_handle_port_resume(struct ata_port *ap)
 	}
 	spin_unlock_irqrestore(ap->lock, flags);
 }
+#endif /* CONFIG_PM */

drivers/ata/libata-scsi.c

@@ -510,6 +510,7 @@ static void ata_dump_status(unsigned id, struct ata_taskfile *tf)
 	}
 }
 
+#ifdef CONFIG_PM
 /**
  *	ata_scsi_device_suspend - suspend ATA device associated with sdev
  *	@sdev: the SCSI device to suspend
@@ -634,6 +635,7 @@ int ata_scsi_device_resume(struct scsi_device *sdev)
 	sdev->sdev_gendev.power.power_state = PMSG_ON;
 	return 0;
 }
+#endif /* CONFIG_PM */
 
 /**
  *	ata_to_sense_error - convert ATA error to SCSI error

include/linux/libata.h

@@ -718,10 +718,12 @@ extern void ata_std_ports(struct ata_ioports *ioaddr);
 extern int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info,
 			     unsigned int n_ports);
 extern void ata_pci_remove_one (struct pci_dev *pdev);
+#ifdef CONFIG_PM
 extern void ata_pci_device_do_suspend(struct pci_dev *pdev, pm_message_t mesg);
 extern int __must_check ata_pci_device_do_resume(struct pci_dev *pdev);
 extern int ata_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg);
 extern int ata_pci_device_resume(struct pci_dev *pdev);
+#endif
 extern int ata_pci_clear_simplex(struct pci_dev *pdev);
 #endif /* CONFIG_PCI */
 extern int ata_device_add(const struct ata_probe_ent *ent);
@@ -747,10 +749,12 @@ extern int sata_scr_write(struct ata_port *ap, int reg, u32 val);
 extern int sata_scr_write_flush(struct ata_port *ap, int reg, u32 val);
 extern int ata_port_online(struct ata_port *ap);
 extern int ata_port_offline(struct ata_port *ap);
+#ifdef CONFIG_PM
 extern int ata_scsi_device_resume(struct scsi_device *);
 extern int ata_scsi_device_suspend(struct scsi_device *, pm_message_t mesg);
 extern int ata_host_suspend(struct ata_host *host, pm_message_t mesg);
 extern void ata_host_resume(struct ata_host *host);
+#endif
 extern int ata_ratelimit(void);
 extern int ata_busy_sleep(struct ata_port *ap,
 			  unsigned long timeout_pat, unsigned long timeout);