Merge tag 'linux-can-next-for-4.10-20161201' of...

Merge tag 'linux-can-next-for-4.10-20161201' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next

Marc Kleine-Budde says:

====================
pull-request: can-next 2016-12-01

this is a pull request of 4 patches for net-next/master.

There are two patches by Chris Paterson for the rcar_can and rcar_canfd
device tree binding documentation. And a patch by Geert Uytterhoeven
that corrects the order of interrupt specifiers.

The fourth patch by Colin Ian King fixes a spelling error in the
kvaser_usb driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Documentation/devicetree/bindings/net/can/rcar_can.txt

@@ -10,6 +10,7 @@ Required properties:
 	      "renesas,can-r8a7793" if CAN controller is a part of R8A7793 SoC.
 	      "renesas,can-r8a7794" if CAN controller is a part of R8A7794 SoC.
 	      "renesas,can-r8a7795" if CAN controller is a part of R8A7795 SoC.
+	      "renesas,can-r8a7796" if CAN controller is a part of R8A7796 SoC.
 	      "renesas,rcar-gen1-can" for a generic R-Car Gen1 compatible device.
 	      "renesas,rcar-gen2-can" for a generic R-Car Gen2 compatible device.
 	      "renesas,rcar-gen3-can" for a generic R-Car Gen3 compatible device.
@@ -24,11 +25,12 @@ Required properties:
 - pinctrl-0: pin control group to be used for this controller.
 - pinctrl-names: must be "default".
 
-Required properties for "renesas,can-r8a7795" compatible:
-In R8A7795 SoC, "clkp2" can be CANFD clock. This is a div6 clock and can be
-used by both CAN and CAN FD controller at the same time. It needs to be scaled
-to maximum frequency if any of these controllers use it. This is done using
-the below properties.
+Required properties for "renesas,can-r8a7795" and "renesas,can-r8a7796"
+compatible:
+In R8A7795 and R8A7796 SoCs, "clkp2" can be CANFD clock. This is a div6 clock
+and can be used by both CAN and CAN FD controller at the same time. It needs to
+be scaled to maximum frequency if any of these controllers use it. This is done
+using the below properties:
 
 - assigned-clocks: phandle of clkp2(CANFD) clock.
 - assigned-clock-rates: maximum frequency of this clock.

Documentation/devicetree/bindings/net/can/rcar_canfd.txt

@@ -5,13 +5,14 @@ Required properties:
 - compatible: Must contain one or more of the following:
   - "renesas,rcar-gen3-canfd" for R-Car Gen3 compatible controller.
   - "renesas,r8a7795-canfd" for R8A7795 (R-Car H3) compatible controller.
+  - "renesas,r8a7796-canfd" for R8A7796 (R-Car M3) compatible controller.
 
   When compatible with the generic version, nodes must list the
   SoC-specific version corresponding to the platform first, followed by the
   family-specific and/or generic versions.
 
 - reg: physical base address and size of the R-Car CAN FD register map.
-- interrupts: interrupt specifier for the Global & Channel interrupts
+- interrupts: interrupt specifiers for the Channel & Global interrupts
 - clocks: phandles and clock specifiers for 3 clock inputs.
 - clock-names: 3 clock input name strings: "fck", "canfd", "can_clk".
 - pinctrl-0: pin control group to be used for this controller.
@@ -23,11 +24,12 @@ The name of the child nodes are "channel0" and "channel1" respectively. Each
 child node supports the "status" property only, which is used to
 enable/disable the respective channel.
 
-Required properties for "renesas,r8a7795-canfd" compatible:
-In R8A7795 SoC, canfd clock is a div6 clock and can be used by both CAN
-and CAN FD controller at the same time. It needs to be scaled to maximum
-frequency if any of these controllers use it. This is done using the
-below properties.
+Required properties for "renesas,r8a7795-canfd" and "renesas,r8a7796-canfd"
+compatible:
+In R8A7795 and R8A7796 SoCs, canfd clock is a div6 clock and can be used by both
+CAN and CAN FD controller at the same time. It needs to be scaled to maximum
+frequency if any of these controllers use it. This is done using the below
+properties:
 
 - assigned-clocks: phandle of canfd clock.
 - assigned-clock-rates: maximum frequency of this clock.

drivers/net/can/usb/kvaser_usb.c

@@ -459,7 +459,7 @@ struct kvaser_usb {
 	struct usb_endpoint_descriptor *bulk_in, *bulk_out;
 	struct usb_anchor rx_submitted;
 
-	/* @max_tx_urbs: Firmware-reported maximum number of oustanding,
+	/* @max_tx_urbs: Firmware-reported maximum number of outstanding,
 	 * not yet ACKed, transmissions on this device. This value is
 	 * also used as a sentinel for marking free tx contexts.
 	 */
@@ -2027,7 +2027,7 @@ static int kvaser_usb_probe(struct usb_interface *intf,
 		((dev->fw_version >> 16) & 0xff),
 		(dev->fw_version & 0xffff));
 
-	dev_dbg(&intf->dev, "Max oustanding tx = %d URBs\n", dev->max_tx_urbs);
+	dev_dbg(&intf->dev, "Max outstanding tx = %d URBs\n", dev->max_tx_urbs);
 
 	err = kvaser_usb_get_card_info(dev);
 	if (err) {