Commit 70365027 authored by Mika Westerberg's avatar Mika Westerberg Committed by Linus Walleij

pinctrl: cherryview: Add a quirk to make Acer Chromebook keyboard work again

After commit 47c950d1 ("pinctrl: cherryview: Do not add all
southwest and north GPIOs to IRQ domain") the driver does not add all
GPIOs to the irqdomain. The reason for that is that those GPIOs cannot
generate IRQs at all, only GPEs (General Purpose Events). This causes
Linux virtual IRQ numbering to change.

However, it seems some CYAN Chromebooks, including Acer Chromebook
hardcodes these Linux IRQ numbers in the ACPI tables of the machine.
Since the numbering is different now, the IRQ meant for keyboard does
not match the Linux virtual IRQ number anymore making the keyboard
non-functional.

Work this around by adding special quirk just for these machines where
we add back all GPIOs to the irqdomain. Rest of the Cherryview/Braswell
based machines will not be affected by the change.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=194945
Fixes: 47c950d1 ("pinctrl: cherryview: Do not add all southwest and north GPIOs to IRQ domain")
Reported-by: default avatarAdam S Levy <theadamlevy@gmail.com>
Signed-off-by: default avatarMika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
parent dbc9d69e
...@@ -13,6 +13,7 @@ ...@@ -13,6 +13,7 @@
* published by the Free Software Foundation. * published by the Free Software Foundation.
*/ */
#include <linux/dmi.h>
#include <linux/kernel.h> #include <linux/kernel.h>
#include <linux/module.h> #include <linux/module.h>
#include <linux/init.h> #include <linux/init.h>
...@@ -1524,10 +1525,31 @@ static void chv_gpio_irq_handler(struct irq_desc *desc) ...@@ -1524,10 +1525,31 @@ static void chv_gpio_irq_handler(struct irq_desc *desc)
chained_irq_exit(chip, desc); chained_irq_exit(chip, desc);
} }
/*
* Certain machines seem to hardcode Linux IRQ numbers in their ACPI
* tables. Since we leave GPIOs that are not capable of generating
* interrupts out of the irqdomain the numbering will be different and
* cause devices using the hardcoded IRQ numbers fail. In order not to
* break such machines we will only mask pins from irqdomain if the machine
* is not listed below.
*/
static const struct dmi_system_id chv_no_valid_mask[] = {
{
/* See https://bugzilla.kernel.org/show_bug.cgi?id=194945 */
.ident = "Acer Chromebook (CYAN)",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "GOOGLE"),
DMI_MATCH(DMI_PRODUCT_NAME, "Edgar"),
DMI_MATCH(DMI_BIOS_DATE, "05/21/2016"),
},
}
};
static int chv_gpio_probe(struct chv_pinctrl *pctrl, int irq) static int chv_gpio_probe(struct chv_pinctrl *pctrl, int irq)
{ {
const struct chv_gpio_pinrange *range; const struct chv_gpio_pinrange *range;
struct gpio_chip *chip = &pctrl->chip; struct gpio_chip *chip = &pctrl->chip;
bool need_valid_mask = !dmi_check_system(chv_no_valid_mask);
int ret, i, offset; int ret, i, offset;
*chip = chv_gpio_chip; *chip = chv_gpio_chip;
...@@ -1536,7 +1558,7 @@ static int chv_gpio_probe(struct chv_pinctrl *pctrl, int irq) ...@@ -1536,7 +1558,7 @@ static int chv_gpio_probe(struct chv_pinctrl *pctrl, int irq)
chip->label = dev_name(pctrl->dev); chip->label = dev_name(pctrl->dev);
chip->parent = pctrl->dev; chip->parent = pctrl->dev;
chip->base = -1; chip->base = -1;
chip->irq_need_valid_mask = true; chip->irq_need_valid_mask = need_valid_mask;
ret = devm_gpiochip_add_data(pctrl->dev, chip, pctrl); ret = devm_gpiochip_add_data(pctrl->dev, chip, pctrl);
if (ret) { if (ret) {
...@@ -1567,7 +1589,7 @@ static int chv_gpio_probe(struct chv_pinctrl *pctrl, int irq) ...@@ -1567,7 +1589,7 @@ static int chv_gpio_probe(struct chv_pinctrl *pctrl, int irq)
intsel &= CHV_PADCTRL0_INTSEL_MASK; intsel &= CHV_PADCTRL0_INTSEL_MASK;
intsel >>= CHV_PADCTRL0_INTSEL_SHIFT; intsel >>= CHV_PADCTRL0_INTSEL_SHIFT;
if (intsel >= pctrl->community->nirqs) if (need_valid_mask && intsel >= pctrl->community->nirqs)
clear_bit(i, chip->irq_valid_mask); clear_bit(i, chip->irq_valid_mask);
} }
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment