ARM: dts: imx25-pdk: Add esdhc1 support

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

arch/arm/boot/dts/imx25-pdk.dts

@@ -37,6 +37,14 @@ reg_fec_3v3: regulator@0 {
 	};
 };
 
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	cd-gpios = <&gpio2 1 0>;
+	wp-gpios = <&gpio2 0 0>;
+	status = "okay";
+};
+
 &fec {
 	phy-mode = "rmii";
 	pinctrl-names = "default";
@@ -48,6 +56,19 @@ &fec {
 
 &iomuxc {
 	imx25-pdk {
+		pinctrl_esdhc1: esdhc1grp {
+			fsl,pins = <
+				MX25_PAD_SD1_CMD__SD1_CMD		0x80000000
+				MX25_PAD_SD1_CLK__SD1_CLK		0x80000000
+				MX25_PAD_SD1_DATA0__SD1_DATA0		0x80000000
+				MX25_PAD_SD1_DATA1__SD1_DATA1		0x80000000
+				MX25_PAD_SD1_DATA2__SD1_DATA2		0x80000000
+				MX25_PAD_SD1_DATA3__SD1_DATA3		0x80000000
+				MX25_PAD_A14__GPIO_2_0			0x80000000
+				MX25_PAD_A15__GPIO_2_1			0x80000000
+			>;
+		};
+
 		pinctrl_fec: fecgrp {
 			fsl,pins = <
 				MX25_PAD_FEC_MDC__FEC_MDC		0x80000000