Commit 70fc26fb authored by Antti Palosaari's avatar Antti Palosaari Committed by Mauro Carvalho Chehab

[media] anysee: add more info about known board configs

Add some comments about known GPIO settings of supported board
versions.
Signed-off-by: default avatarAntti Palosaari <crope@iki.fi>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@redhat.com>
parent 882b82ca
......@@ -306,37 +306,41 @@ static struct tda18212_config anysee_tda18212_config = {
*
* E30 VID=04b4 PID=861f HW=2 FW=2.1 Product=????????
* PCB: ?
* parts: MT352, DTT7579(?), DNOS404ZH102A NIM
* parts: DNOS404ZH102A(MT352, DTT7579(?))
*
* E30 VID=04b4 PID=861f HW=2 FW=2.1 Product=????????
* PCB: ?
* parts: ZL10353, DTT7579(?), DNOS404ZH103A NIM
* parts: DNOS404ZH103A(ZL10353, DTT7579(?))
*
* E30 Plus VID=04b4 PID=861f HW=6 FW=1.0 "anysee"
* PCB: 507CD (rev1.1)
* parts: ZL10353, DTT7579(?), CST56I01, DNOS404ZH103A NIM
* parts: DNOS404ZH103A(ZL10353, DTT7579(?)), CST56I01
* OEA=80 OEB=00 OEC=00 OED=ff OEF=fe
* IOA=4f IOB=ff IOC=00 IOD=06 IOF=01
* IOD[0] ZL10353 1=enabled
* IOA[7] TS 0=enabled
* tuner is not behind ZL10353 I2C-gate (no care if gate disabled or not)
*
* E30 C Plus VID=04b4 PID=861f HW=10 FW=1.0 "anysee-DC(LP)"
* PCB: 507DC (rev0.2)
* parts: TDA10023, CST56I01, DTOS403IH102B TM
* parts: TDA10023, DTOS403IH102B TM, CST56I01
* OEA=80 OEB=00 OEC=00 OED=ff OEF=fe
* IOA=4f IOB=ff IOC=00 IOD=26 IOF=01
* IOD[0] TDA10023 1=enabled
*
* E30 C Plus VID=1c73 PID=861f HW=15 FW=1.2 "anysee-FA(LP)"
* PCB: 507FA (rev0.4)
* parts: TDA10023, TDA8024, DTOS403IH102B TM
* parts: TDA10023, DTOS403IH102B TM, TDA8024
* OEA=80 OEB=00 OEC=ff OED=ff OEF=ff
* IOA=4d IOB=ff IOC=00 IOD=00 IOF=c0
* IOD[5] TDA10023 1=enabled
* IOE[0] tuner 1=enabled
*
* E30 Combo Plus VID=1c73 PID=861f HW=15 FW=1.2 "anysee-FA(LP)"
* PCB: 507FA (rev1.1)
* parts: ZL10353, TDA10023, TDA8024, DTOS403IH102B TM
* parts: ZL10353, TDA10023, DTOS403IH102B TM, TDA8024
* OEA=80 OEB=00 OEC=ff OED=ff OEF=ff
* IOA=4d IOB=ff IOC=00 IOD=00 IOF=c0
* DVB-C:
* IOD[5] TDA10023 1=enabled
* IOE[0] tuner 1=enabled
......@@ -344,6 +348,22 @@ static struct tda18212_config anysee_tda18212_config = {
* IOD[0] ZL10353 1=enabled
* IOE[0] tuner 0=enabled
* tuner is behind ZL10353 I2C-gate
*
* E7 TC VID=1c73 PID=861f HW=18 FW=0.7 AMTCI=0.5 "anysee-E7TC(LP)"
* PCB: 508TC (rev0.6)
* parts: ZL10353, TDA10023, DNOD44CDH086A(TDA18212)
* OEA=80 OEB=00 OEC=03 OED=f7 OEF=ff
* IOA=4d IOB=00 IOC=cc IOD=48 IOF=e4
* IOA[7] TS 1=enabled
* IOE[4] TDA18212 1=enabled
* DVB-C:
* IOD[6] ZL10353 0=disabled
* IOD[5] TDA10023 1=enabled
* IOE[0] IF 1=enabled
* DVB-T:
* IOD[5] TDA10023 0=disabled
* IOD[6] ZL10353 1=enabled
* IOE[0] IF 0=enabled
*/
static int anysee_frontend_attach(struct dvb_usb_adapter *adap)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment